半导体光电, 2017, 38 (2): 180, 网络出版: 2017-05-09   

TE振荡模在含各向异性左手材料劈形平面波导中的传输

Propagation of TE Oscillating Guided Modes in a Taper Slab Waveguide with Anisotropic Metamaterials
作者单位
1 湖州师范学院 理学院, 浙江 湖州 313000
2 上海大学 通信与信息工程学院, 上海 200072
摘要
研究了含各向异性左手材料的劈形平面波导TE振荡模的传输特性。 首先,从麦克斯韦方程组出发,得到该模的色散方程、反射系数方程、传输系数方程以及功率损耗方程。然后,根据这些方程画出了相关特性曲线并对这些曲线进行了仔细分析,研究发现:(1)当模阶数m=0,1,2时,TE模的有效折射率具有较大的值,且随着波导长度的增加而快速减小;(2)TE0模具有超大的反射系数,最大值接近0.967;(3)TE0模传输系数总是小于等于1.2×10-3;(4)当劈形波导斜率k=0.01时,其功率损耗大于等于0.998,而且,当频率为5.0GHz时,功率损耗仍大于等于0.98。
Abstract
The propagation properties of the TE oscillating guided modes in a taper slab waveguide with anisotropic metamaterials were investigated. Through Maxwell equations, the dispersive, reflection coefficient, transmission coefficient and power loss equations were obtained. Then, some characteristic curves were plotted and studied in detail. It is found that, firstly, for different mode number (i.e., m=0,1,2), the effective refractive index employs larger values and decreases rapidly at first as waveguide length increases; secondly, the maximum of the reflection coefficient is near 0.967; thirdly, extra small transmission coefficient |ct|2≤1.2×10-3; fourthly, as the slope k is 0.01, for different frequency f, the power loss Δp/p≥0.998, but, for different k, as f= 5.0GHz, Δp/p≥0.98.

沈陆发, 谢建平, 王子华. TE振荡模在含各向异性左手材料劈形平面波导中的传输[J]. 半导体光电, 2017, 38(2): 180. SHEN Lufa, XIE Jianping, WANG Zihua. Propagation of TE Oscillating Guided Modes in a Taper Slab Waveguide with Anisotropic Metamaterials[J]. Semiconductor Optoelectronics, 2017, 38(2): 180.

本文已被 1 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!