红外与激光工程, 2017, 46 (3): 0306003, 网络出版: 2017-06-27   

基于激光回馈效应的液晶双折射特性测量

Birefringence measurement of liquid crystals based on laser feedback effect
作者单位
1 清华大学 精密仪器系 精密测试技术及仪器国家重点实验室, 北京 100084
2 北京航空航天大学 仪器科学与光电工程学院, 北京 100191
3 福建福晶科技股份有限公司, 福建 福州 350003
摘要
准确的双折射特性测量对于液晶的实际应用具有重要意义。研究了液晶材料的工作原理, 以激光回馈效应为基础, 搭建了各向异性外腔回馈双折射测量系统, 对不同驱动电压下液晶的双折射特性进行测量。测量结果表明, 各向异性外腔回馈双折射测量系统测量精度在0.3°之内; 通过施加0~24V交流电压, 液晶材料双折射率在2.74×10-1~2.39×10-3范围内变化, 对应各向异性呈现出460°~5°的大范围位相延迟值。电压范围在0.7~2V时, 电压-双折射率关系表现出较好的线性度, 通过线性拟合对该范围内电压-双折射率关系进行计算, 其线性度优于95.5%。液晶材料可以提供稳定的位相延迟, 同一电压值下的位相延迟短期重复性优于0.52°, 长期重复性优于4.5°。
Abstract
The precise measurement of the birefringence in the liquid crystals has significant meaning for practical applications. The working principles of the liquid crystals were analyzed. The laser anisotropy external cavity feedback system was built based on the laser feedback effect. The anisotropy of the liquid crystals under different voltages was measured. The measurement results show that the accuracy of the laser anisotropy external cavity feedback system is within 0.3°; By imposing different voltage from 0 to 24 V, the birefringence changes from 2.74×10-1 to 2.39×10-3, corresponding to the large range phase retardation of 460° to 5°. With the voltage in the range of 0.7 V to 2 V, the relationship between the voltage and the birefringence is linear and its linearity is better than 95.5%. The liquid crystals can provide stable phase retardation, the short-term repeatability is better than 0.52° and the long-term repeatability is better than 4.5°.

李继扬, 谈宜东, 吴季, 张书练. 基于激光回馈效应的液晶双折射特性测量[J]. 红外与激光工程, 2017, 46(3): 0306003. Li Jiyang, Tan Yidong, Wu Ji, Zhang Shulian. Birefringence measurement of liquid crystals based on laser feedback effect[J]. Infrared and Laser Engineering, 2017, 46(3): 0306003.

本文已被 4 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!