发光学报, 2017, 38 (6): 742, 网络出版: 2017-06-30   

半导体激光泵浦复合晶体固体激光器的热效应

Thermal Effect of Composite Crystals Solid State Lasers Pumped by Diode Laser
作者单位
核工业理化工程研究院, 天津 300180
摘要
为了验证复合晶体使用到半导体泵浦的固体激光器中与非复合晶体的区别, 提高半导体泵浦的固体激光器的工作效率, 开展了半导体激光泵浦YAP/Tm∶YAP复合晶体固体激光器的热效应的验证实验。采用有限元分析法, 模拟了晶体温度及热应力的分布, 并分析了热透镜长度的变化情况。结果发现, 与非复合晶体相比, 复合晶体的温度和热应力均有不同程度的下降, 复合晶体工作时的最高温度降至其80%, 热应力降至其70%。同时也验证了热透镜焦距不随非掺杂晶体长度的增大而改变, 这也意味着复合晶体不能有效提高复合激光的光束质量, 但是可以确保输出激光光束质量的稳定性。因此可以证实, 使用复合晶体能够有效改善激光器的温度和力学特性, 但不能优化固体激光器的光束质量。
Abstract
In order to distinguish the characteristics of composite and traditional non-composite crystal used in the diode pumped solid state lasers (DPSSL)and improve the efficiency of DPSSL, the thermal effect of based on YAP/Tm∶YAP composite crystal was studied. The finite element method (FEM) was employed. The temperature and heat stress were simulated, and the relationship between the thermal lens and un-doped crystal length was analyzed. Experimental results indicate that the peak temperature and the thermal stress of YAP/Tm∶YAP composite crystal rod decrease to less than 80% and 70% comparing with the non-composite crystal. The length of thermal lens is still constant under the condition of the variation of un-doped crystal length, which verifies that using the composite crystal in the DPSSL can benefit for the laser properties of temperature and mechanics. Nevertheless, the beam quality of DPSSL can not be optimized using the composite crystal.

杨丽颖, 李嘉强, 张金玉, 徐晓明, 曹剑. 半导体激光泵浦复合晶体固体激光器的热效应[J]. 发光学报, 2017, 38(6): 742. YANG Li-ying, LI Jia-qiang, ZHANG Jin-yu, XU Xiao-ming, CAO Jian. Thermal Effect of Composite Crystals Solid State Lasers Pumped by Diode Laser[J]. Chinese Journal of Luminescence, 2017, 38(6): 742.

本文已被 5 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!