激光与光电子学进展, 2017, 54 (8): 081403, 网络出版: 2017-08-02   

管材激光弯曲成形工艺模型

Process Model for Laser Bending Shaping of Tubes
作者单位
1 江苏大学机械工程学院, 江苏 镇江 212013
2 上海交通大学机械与动力工程学院, 上海 200240
摘要
利用响应曲面法建立了管材激光弯曲成形弯曲角度的工艺模型, 并设计实验验证了模型的可靠性。通过该模型分析了自由端距离、辐射长度、扫描包角和扫描次数等工艺参数对弯曲角度的交互影响。结果表明, 自由端距离、扫描次数和辐射长度对弯曲角度有显著影响, 扫描包角对弯曲角度影响不大;辐射长度与扫描次数间的交互作用较弱, 与自由端距离具有较强的交互作用。
Abstract
A process model of the bending angle in laser-bending shaping of tubes is built by using the response surface method and its reliability is demonstrated with the designed experiment. The interactive influences of the process parameters such as the distance from free edge, the irradiation length, the scanning angle and the number of scanning on the bending angle are analyzed based on this model. The results show that the distance from free edge, the number of scanning and the irradiation length have significant influences on the bending angle, but the scanning angle has little influence. The irradiation length has a weak interaction with the number of scanning, but a strong one with the distance from free edge.

李品, 刘保光, 刘会霞. 管材激光弯曲成形工艺模型[J]. 激光与光电子学进展, 2017, 54(8): 081403. Li Pin, Liu Baoguang, Liu Huixia. Process Model for Laser Bending Shaping of Tubes[J]. Laser & Optoelectronics Progress, 2017, 54(8): 081403.

本文已被 1 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!