激光与光电子学进展, 2017, 54 (10): 100501, 网络出版: 2017-10-09   

波长可调谐导模共振滤波器的设计及优化 下载: 584次

Design and Optimization of Wavelength Tunable Guide Mode Resonance Filter
江孝伟 1,2,*武华 2,3王飞 1
作者单位
1 衢州职业技术学院信息工程学院, 浙江 衢州 324000
2 北京工业大学电子信息与控制工程学院光电子技术实验室, 北京 100124
3 赣南师范大学物理与电子信息学院, 江西 赣州 341000
摘要
利用严格耦合波法设计并优化了中心波长为1.55 μm, 基于液晶的波长可调谐导模共振滤波器(WTGMF)。通过计算得知减反层和衬底的厚度均对滤波器的共振线宽有影响, 减反层的厚度越薄共振线宽越宽, 但是对于衬底厚度总存在着一个最优的厚度使线宽达到最窄, 当衬底厚度为300 nm时, 线宽缩小到最窄的0.96 nm。另外决定WTGMF的波长调谐范围的主要因素是液晶层的厚度, 调谐范围随着液晶层厚度的增加而增加并最终达到稳定, 当液晶层厚度达到1600 nm时波长调谐范围达到最大的39 nm。
Abstract
Based on liquid crystal, a wavelength tunable guide mode resonance filter (WTGMF) with a center wavelength of 1.55 μm is designed and optimized by using the rigorous coupled wave method. From calculation, the thicknesses of anti-reflection layer and substrate both have influence on the resonance line width of the filter. The thinner the thickness of anti-reflection layer is, the wider the resonance line width is. However, there is always an optimum substrate thickness to minimize the line width. When the substrate thickness is 300 nm, the resonance width is the narrowest with only 0.96 nm. In addition, the main factor that determine the wavelength tuning range of WTGMF is the thickness of the liquid crystal layer. The tuning range increases with the increase of the thickness of the liquid crystal layer and finally reaches stability. When the thickness of the liquid crystal layer reaches 1600 nm, the wavelength tuning range reaches the maximum of 39 nm.

江孝伟, 武华, 王飞. 波长可调谐导模共振滤波器的设计及优化[J]. 激光与光电子学进展, 2017, 54(10): 100501. Jiang Xiaowei, Wu Hua, Wang Fei. Design and Optimization of Wavelength Tunable Guide Mode Resonance Filter[J]. Laser & Optoelectronics Progress, 2017, 54(10): 100501.

本文已被 1 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!