光电子快报(英文版), 2014, 10 (1): 34, Published Online: Oct. 12, 2017  

A high-drop hole-type photonic crystal add-drop filter

Author Affiliations
1 Fujian Provincial Key Laboratory for Photonics Technology, Key Laboratory of Optoelectronic Science and Technology for Medicine, Ministry of Education, Institute of Laser and Optoelectronics Technology, Fujian Normal University, Fuzhou 350007, China
2 Department of Electronic Information Science, Fujian Jiangxia College, Fuzhou 350007, China
Abstract
Based on the effect of total internal reflection (TIR) and photonic band gap, a new type of hexagonal-lattice hole-type silicon photonic crystal add-drop filter is proposed with a large circular hole as inner ring. The single mode operation is realized by compressing the two rows of photonic crystal above and below the line defect waveguide. Two-dimensional (2D) finite-difference time-domain (FDTD) method is then applied to investigate the impacts of side length of inner ring and coupling strength on its drop efficiency. It is also fairly compared with the traditional inner ring structure composed of hexagonal-lattice holes. The results show that the proposed structure can offer higher spectral selectivity than the traditional one. Two channel wavelengths of 1.425 μm and 1.45 μm can be simultaneously dropped at corresponding ports with drop efficiency of more than 90% and quality factor of 900 in the proposed configuration when the width of bus waveguide, the side length of inner ring and the coupling strength are 0.8 3 a, 4a and 0, respectively, where a is the lattice constant.

JIANG Jun-zhen, QIANG Ze-xuan, ZHANG Hao, ZHENG Yan-min, QIU Yi-shen. A high-drop hole-type photonic crystal add-drop filter[J]. 光电子快报(英文版), 2014, 10(1): 34.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!