光学 精密工程, 2017, 25 (7): 1764, 网络出版: 2017-10-30   

大尺寸光学元件在位动态干涉拼接测量系统

On-line dynamic interference stitching measurement system for large optical elements
作者单位
上海大学 机电工程及自动化学院, 上海 200072
摘要
为了满足车间条件下大口径光学元件的高精度在位、在线检测的迫切需求, 本文构建了一个适于一般环境下应用的动态干涉拼接测量实验系统。该系统由动态干涉仪、二维移动平台、控制系统及拼接软件等部分构成。应用该系统对200 mm×300 mm×20 mm的光学元件在一般应用环境下进行了拼接测量实验, 采用误差均化拼接算法进行拼接, 并对拼接后的结果进行分析处理, 比较拼接测量与全口径测量结果, PV值的相对误差为3.1%, RMS值的相对误差为16%, Power值的相对误差为2.1%。该系统为在车间环境下建立大口径光学元件在位检测建立了基础。
Abstract
In order to realize on-line and in-situ measurement of high precision optical elements in workshop, a dynamic interference stitching system for large optical elements measured in general environment was investigated. The system was consisted of a dynamic interferometer, two-dimensional mobile platform, control system and stitching software. A stitching experiment for an 200 mm×300 mm optical element was completed by this system in general environment, based on error averaging stitching algorithm. Moreover, the stitching results were analyzed. Comparing the results between stitching measurement and full aperture measurement, the relative deviations of PV, RMS and Power are 3.1%, 1.6% and 2.1% respectively. The system lays a foundation for the on-line and in-situ measurement system for large optical elements in the workshop environment.

于瀛洁, 齐特, 武欣. 大尺寸光学元件在位动态干涉拼接测量系统[J]. 光学 精密工程, 2017, 25(7): 1764. YU Ying-jie, QI Te, WU Xin. On-line dynamic interference stitching measurement system for large optical elements[J]. Optics and Precision Engineering, 2017, 25(7): 1764.

本文已被 2 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!