红外与激光工程, 2017, 46 (9): 0906007, 网络出版: 2017-11-17   

基于中空激光光内送粉技术的扇形结构件激光成形研究

Laser cladding forming of fan-shaped part based on hollow laser beam inside powder feeding technology
作者单位
1 苏州大学 机电工程学院, 江苏 苏州 215021
2 西安交通大学 机械工程学院, 陕西 西安710049
摘要
基于中空激光光内送粉技术, 运用实时变姿态方法和法向分层方法, 进行了具有不等高熔道特征的扇形结构件成形研究。分析了熔道层高与扫描速度之间的对应关系, 结合不等高熔道的几何模型和熔道层高与扫描速度之间的关系, 采用分段变速的方法熔覆出了不等高熔道。在此基础上进行多道不等高熔道堆积, 成形出了扇形薄壁墙结构。分析表明, 所获得成形件尺寸精度较高, 相对尺寸误差控制在7%以内; 成形件各处显微组织差异较小, 组织细密、均匀。
Abstract
Based on hollow laser beam inside powder feeding technology, the study of forming fan-shaped part whose cladding height was unequal was carried out by the method of variable attitude forming and normal lamination method. The connection between cladding height and scanning velocity was analyzed. The cladding with unequal height was formed by the method of piecewise variable velocity combining geometric model and the connection above. Based on this method, the fan-shaped part was formed. The experimental result indicates that the formed part has high-precision dimension and good surface quality. In addition, the microstructures of the part at different parameter have no significant differences, and all achieve small grain size and compact texture.

周斌, 石世宏, 邓志强, 石拓, 傅戈雁, 方琴琴. 基于中空激光光内送粉技术的扇形结构件激光成形研究[J]. 红外与激光工程, 2017, 46(9): 0906007. Zhou Bin, Shi Shihong, Deng Zhiqiang, Shi Tuo, Fu Geyan, Fang Qinqin. Laser cladding forming of fan-shaped part based on hollow laser beam inside powder feeding technology[J]. Infrared and Laser Engineering, 2017, 46(9): 0906007.

本文已被 2 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!