光子学报, 2017, 46 (12): 1223002, 网络出版: 2017-11-23   

基于瑞利-索墨菲积分的大角度激光分束器设计

Designof the Laser Beam Splitter with Large Diffraction Angle Based on Rayleigh-Sommerfeld Intergral
作者单位
1 西南交通大学 机械工程学院 机电测控系,成都 610000
2 中国科学院光电技术研究所,成都 610209
摘要
针对目前激光分束器只能产生小发散角的问题, 基于严格的非傍轴近似的衍射积分公式, 提出了一种大发散角分束器的设计方法.先对目标光场分布进行坐标和光强修整, 再利用改进的Gerchberg-Saxton迭代算法得到所需分束器的相位分布.分别采用本文设计方法和原有方法设计了发散全角为40°×40°的5×5分束器, 仿真和实验结果表明: 原有方法设计得到的5×5子光束存在着显著的枕形畸变, 并且光强分布不均匀.而本文方法设计得到的子光束呈均匀等间隔排列, 并且强度分布更为均匀.
Abstract
In order to solve the problem that the rencent design method can only fit the small divergence angle situation, a novel method is prensented for disigning the beam laser splitter with large angle based on the Rayleigh-Sommerfeld Integral. In the design, firstly the target intensity distribution is modified with coordinate transformation and intensity adjustment, then the modified Gerchberg-Saxton algorithm is adopted to optimize the phase distribution of the beam laser splitter. Our method and original method are used to design the 5×5 splitter with 40°×40° diffraction angle. The simulation and experiment result shows that original method shows significant pillow distortion and uneven intensity distribution. In contrast, the sub beams of the splitter designed by our method are well-proportioned and the intensity distribution is even.

王广逸, 庞辉, 王佳舟, 张满, 刘鑫, 史立芳, 吴向东, 邓启凌. 基于瑞利-索墨菲积分的大角度激光分束器设计[J]. 光子学报, 2017, 46(12): 1223002. WANG Guang-yi, PANG Hui, WANG Jia-zhou, ZHANG Man, LIU Xin, SHI Li-fang, WU Xiang-dong, DENG Qi-ling. Designof the Laser Beam Splitter with Large Diffraction Angle Based on Rayleigh-Sommerfeld Intergral[J]. ACTA PHOTONICA SINICA, 2017, 46(12): 1223002.

本文已被 2 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!