中国激光, 2017, 44 (12): 1202001, 网络出版: 2017-12-11   

多脉冲激光修整青铜金刚石砂轮的表面变质层

Multi-Pulsed Laser Truing and Dressing of Deterioration Layer on Bronze-Bonded Diamond Grinding Wheel Surface
作者单位
1 湖南大学汽车车身先进设计制造国家重点实验室, 湖南 长沙 410082
2 湖南工业大学机械工程学院, 湖南 株洲 412000
摘要
对脉冲激光修整青铜金刚石砂轮石墨变质层进行了理论研究, 当激光功率密度为1.68×108~3.359×108 W/cm2时, 对金刚石表面的温度演化进行了数值仿真。研究结果表明, 金刚石达到石墨化温度的时间约为435~440 ns, 金刚石的石墨化程度较低。提出了水柱流辅助脉冲光纤激光修整青铜金刚石砂轮的新方法, 降低了金刚石的石墨化程度。
Abstract
After the pulsed laser truing and dressing,the graphitized deterioration layers of bronze-bonded diamond grinding wheels are investigated theoretically. When the laser power density is 1.68×108-3.359×108 W·cm-2, the temperature evolution on the diamond surface is numerically simulated. The study results show that the time for which the diamond temperature reaches the graphitization temperature is 435-440 ns, and the graphitization degree is low. A new method for pulsed fiber laser truing and dressing of bronze-bonded diamond grinding wheels assisted by liquid column flows is proposed, which clearly reduces the graphitization degree.

蔡颂, 陈根余, 周聪, 明兴祖. 多脉冲激光修整青铜金刚石砂轮的表面变质层[J]. 中国激光, 2017, 44(12): 1202001. Cai Song, Chen Genyu, Zhou Cong, Ming Xingzu. Multi-Pulsed Laser Truing and Dressing of Deterioration Layer on Bronze-Bonded Diamond Grinding Wheel Surface[J]. Chinese Journal of Lasers, 2017, 44(12): 1202001.

本文已被 1 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!