发光学报, 2017, 38 (12): 1688, 网络出版: 2017-12-25   

圆孔液晶透镜的ZEMAX设计与优化

Design and Optimization of Round Hole LCD Lens Based on ZEMAX
作者单位
1 集美大学 理学院, 福建 厦门 361021
2 福州大学 物理与信息工程学院, 福建 福州 350116
摘要
液晶透镜是自由3D显示的新器件, 其原理是利用基于向列相液晶指向矢随外加电场作用发生变化的光电特性。本文提出一种简易准确的透镜参数设计和优化方案。以单圆孔结构的液晶透镜为例, 利用光学软件ZEMAX和焦距缩放法对圆孔结构的液晶透镜的参数加以设计并优化。分析液晶透镜的像差, 评价成像质量。结果表明, 优化后的液晶透镜的像差明显减小, 3.5°视场下, 弥散斑均方根半径RMS值由248.118 μm减小到62.192 μm, 为原来的25.1%; 光学调制传递函数MTF值明显改善。最后实验测试验证了液晶透镜阵列的衍射光斑亮度及清晰度均显著提高。
Abstract
Liquid-crystal lenses are new devices for free 3D display, its photoelectric properties are controlled by electric field. The accurate design and optimization method of lens parameters were presented in this paper. Based on the optical software ZEMAX and the focal length zoom method, the parameters of LCDs were designed and optimized. Then, the aberration of liquid crystal lens and image quality were evaluated. it is proved that the optimized liquid crystal lens aberration decreases evidently. The dispersion spot root mean square radius (RMS) value decreases from 248.118 μm to 62.192 μm with 3.5° view and the optical modulation transfer function MTF is improved. The experimental results show that the brightness and clarity of the diffractive lens array are significantly improved.

杨兰, 蔡晓梅, 周雄图, 郭太良, 叶芸. 圆孔液晶透镜的ZEMAX设计与优化[J]. 发光学报, 2017, 38(12): 1688. YANG Lan, CAI Xiao-mei, ZHOU Xiong-tu, GUO Tai-liang, YE Yun. Design and Optimization of Round Hole LCD Lens Based on ZEMAX[J]. Chinese Journal of Luminescence, 2017, 38(12): 1688.

本文已被 3 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!