首页 > 论文 > 激光与光电子学进展 > 55卷 > 1期(pp:11407--1)

激光增材制造钢粉体材料研究现状

Research Status of Steel Powder Material for Laser Additive Manufacturing

  • 摘要
  • 论文信息
  • 参考文献
  • 被引情况
  • PDF全文
分享:

摘要

随着激光增材制造金属件的质量和性能的提高, 金属粉体材料已成为金属激光增材制造技术应用的制约因素, 激光增材制造专用金属粉体材料成为了近年来的研究热点之一。针对激光增材制造钢粉体材料, 从材料设计、粉体制备、表征评价、样件实例等方面综述了激光增材制造钢粉体材料的国内研究现状, 提出了激光3D粉体材料研究和应用中存在的主要问题及发展方向。

Abstract

With the improvement of the quality and performance of laser additive manufacturing metal components, the metal powder material has become a restraining factor for the application of metal laser additive manufacturing technology. Therefore, the special metal powder for laser additive manufacturing has recently become one of the research hotspots in the recent years. The research current status of steel powders used for laser additive manufacturing is reviewed from various aspects such as materials design, powder fabrication, powder evaluation and sample cases. Also, the main problems and research directions are put forward for the research and application of laser additive manufacturing steel powders.

投稿润色
补充资料

中图分类号:TG142.4

DOI:10.3788/lop55.011407

所属栏目:“激光增材制造技术”专题

基金项目:国家重点研发计划重点专项(2016YFB1100200)、北京市科技专项计划(Z161100004916009,Z161100001516007)

收稿日期:2017-10-23

修改稿日期:2017-11-16

网络出版日期:--

作者单位    点击查看

董世运:陆军装甲兵学院装备再制造技术国防科技重点实验室, 北京 100072
闫世兴:陆军装甲兵学院装备再制造技术国防科技重点实验室, 北京 100072
冯祥奕:陆军装甲兵学院装备再制造技术国防科技重点实验室, 北京 100072
李永健:陆军装甲兵学院装备再制造技术国防科技重点实验室, 北京 100072
陈岁元:东北大学材料与冶金学院, 辽宁 沈阳 110004

联系人作者:董世运(445279752@qq.com)

备注:董世运(1973-), 男, 博士, 研究员, 博士生导师, 主要从事激光增材制造与再制造及其质量无损检测评价等方面的研究。E-mail: 445279752@qq.com

【1】Lu B H. Research progress of advanced manufacturing technology in Xi′an Jiaotong University[J]. Engineering Sciences, 2013, 15(1): 4-8.
卢秉恒. 西安交通大学先进制造技术研究进展[J]. 中国工程科学, 2013, 15(1): 4-8.

【2】Breuninger J. Additive manufacturing: Challenges and advantages for the medical industry[J]. Puerto Rico Health Sciences Journal, 2000, 19(1): 57-67.

【3】赵晓凤. 美国3D打印产业发展迅速将带动全球金属粉末市场[J]. 现代材料动态, 2017, (3): 16-17.

【4】Zheng X, Xue L, Huang W D. Powder proportion during laser solid forming from blended element powders[J]. Hot Working Technology, 2012, 41(18): 21-23.
郑星, 薛蕾, 黄卫东. 混合元素法激光立体成形中粉末配比的研究[J]. 热加工工艺, 2012, 41(18): 21-23.

【5】Dong S Y, Ma Y Z, Xu B S, et al. Current status of material for laser cladding[J]. Materials Review, 2006, 20(6): 5-9.
董世运, 马运哲, 徐滨士, 等. 激光熔覆材料研究现状[J]. 材料导报, 2006, 20(6): 5-9.

【6】Takeda T, Steen W M, West D R F. Laser cladding with multi elemental powder feed[M]. Berlin: Springer, 1986: 394-398.

【7】Steen W M, Vilar R M, Watkins K G, et al. Alloy system analysis by laser cladding[C]// Proceeding ICALEO, 1992, 92: 278-288.

【8】Watkins K G. Achieving the potential of direct fabrication with lasers[C]. 3rd International Conference on Laser Assisted Net Shaping (LANE 2001), 2001: 25-38.

【9】Zhao J C. A perspective on thematerials genome initiative[J]. Chinese Journal of Nature, 2014, 36(2): 89-104.
赵继成. 材料基因组计划简介[J]. 自然杂志, 2014, 36(2): 89-104.

【10】中仿科技. 金属材料相图及物理性能计算软件JMatPro V6.1简介[J]. 智能制造, 2012(10): 35-37.

【11】Li Y M, Li J G, Yang H O, et al. Laser direct forming of metal components[J]. Applied Laser, 2002, 22(2): 140-144.
李延民, 李建国, 杨海欧, 等. 金属零件激光直接成形[J]. 应用激光, 2002, 22(2): 140-144.

【12】Li S, Hu Q W, Zeng X Y, et al. Effect of carbon content on the microstructure and the cracking susceptibility of Fe-based laser-clad layer[J]. Applied Surface Science, 2005, 240(1): 63-70.

【13】Nakamoto T, Shirakawa N, Miyata Y, et al. Selective laser sintering of high carbon steel powders studied as a function of carbon content[J]. Journal of Materials Processing Technology, 2009, 209(15): 5653-5660.

【14】Song W L, Zhu P D, Cui K. Effect of Ni content on cracking susceptibility and microstructure of laser-clad Fe-Cr-Ni-B-Si alloy[J]. Surface and Coatings Technology, 1996, 80: 279-282.

【15】Li S, Zeng X Y, Hu Q W. Influence of alloy elements and their content on performance of laser cladding layers on Fe-based alloy[J]. Hot Working Technology, 2006, 35(23): 67-69.
李胜, 曾晓雁, 胡乾午. 合金元素及其含量对铁基合金激光熔覆层性能的影响[J]. 热加工工艺, 2006, 35(23): 67-69.

【16】Yang X Y, Peng X, Chen J, et al. Effect of a small increase in the Ni content on the properties of a laser surface clad Fe-based alloy[J]. Applied Surface Science, 2007, 253(9): 4420-4426.

【17】姜峰. 合金元素对粉末冶金低合金钢性能和组织的影响研究[D]. 长沙: 中南大学, 2004.

【18】Chen J, Lin X, Wang T, et al. The hot cracking mechanism of 316L stainless steel cladding in rapid laser forming process[J]. Rare Metal Materials & Engineering, 2003, 32(3): 183-186.
陈静, 林鑫, 王涛, 等. 316L不锈钢激光快速成形过程中熔覆层的热裂机理[J]. 稀有金属材料与工程, 2003, 32(3): 183-186.

【19】Yang H O. The Microstructure and Mechanical Characters of Rene95 Laser Solid Forming[D]. Xi′an: Northwestern Polytechnical University, 2002.
杨海欧. Rene95合金激光立体成形显微组织与力学性能研究[D]. 西安: 西北工业大学, 2002.

【20】Shi D K, Meng Q K, Liu J H. Microstructure and mechanical properties of interphase precipitation steel[J]. Iron & Steel, 1994, 29(4): 50-55.
石德珂, 孟庆奎, 刘军海. 相间沉淀钢的组织与性能[J]. 钢铁, 1994, 29(4): 50-55.

【21】Gao L L, Bian X F, Tian Y S, et al. Effect of Co on microstructure and interfacial properties of Fe-based laser cladding[J]. Journal of Iron and Steel Research, International, 2009, 16(4): 84-88.

【22】Zhang Y Z, Xi M Z, Shi L K, et al. Research on laser direct deposition of 316L stainless steel[J]. Journal of Materials Engineering, 2002(5): 22-25.
张永忠, 席明哲, 石力开, 等. 激光快速成形316L不锈钢研究[J]. 材料工程, 2002(5): 22-25.

【23】Xi M Z, Zhang Y Z, Zhang P Z, et al. Influence of processing parameter on the microstructure and properties of the 316L SS fabricated by laser direct deposition[J]. Chinese Journal of Lasers, 2002, 29(11): 1045-1048.
席明哲, 张永忠, 章萍芝, 等. 工艺参数对激光快速成型316L不锈钢组织性能的影响[J]. 中国激光, 2002, 29(11): 1045-1048.

【24】Liu Z W, Cheng X, Li J, et al. Effect of heat treatments on microstructures and mechanical properties of laser additive manufactured 05Cr15Ni5Cu4Nb stainless steel[J]. Chinese Journal of Lasers, 2017, 44(6): 0602010.
刘正武, 程序, 李佳, 等. 激光增材制造05Cr15Ni5Cu4Nb沉淀硬化不锈钢的热处理工艺[J]. 中国激光, 2017, 44(6): 0602010.

【25】Wang Z H, Wang H M, Liu D. Microstructure and mechanical properties of AF1410 ultra-high strength steel using laser additive manufacture technique[J]. Chinese Journal of Lasers, 2016, 43(4): 0403001.
王志会, 王华明, 刘栋. 激光增材制造AF1410超高强度钢组织与力学性能研究[J]. 中国激光, 2016, 43(4): 0403001.

【26】Capus J. Sandvik Osprey: a very bright future[J]. Metal Powder Report, 2016, 71(2): 81-85.

【27】江洪, 杜妍洁, 刘义鹤. 美国科技与金融结合案例: Carpenter技术公司发展启示[J]. 新材料产业, 2016(8): 21-24.

【28】Chen J, Lin X, Wang T, et al. Metal powder materials for additive manufacturing and their preparation methods[J]. Industrial Technology Innovation, 2017(4): 59-63.
张飞, 高正江, 马腾,等. 增材制造用金属粉末材料及其制备技术[J]. 工业技术创新, 2017(4): 59-63.

【29】Song J L, Deng Q L, Hu D J, et al. Microstructure characterization and properties of laser cladding forming 316L stainless steel[J]. Chinese Journal of Lasers, 2005, 32(10): 1441-1444..
宋建丽, 邓琦林, 胡德金,等. 激光熔覆成形316L不锈钢组织的特征与性能[J]. 中国激光, 2005, 32(10): 1441-1444.

【30】Xi M Z, Yu G, Zhang Y Z, et al. Interaction of the laser beam and the metal powder conveyed by coaxial powder feeder[J]. Chinese Journal of Lasers, 2005, 32(4): 562-566.
席明哲, 虞钢, 张永忠, 等. 同轴送粉激光成形中粉末与激光的相互作用[J]. 中国激光, 2005, 32(4): 562-566.

【31】Shi Y S, Li R D, Zhang W X, et al. Study on the technique during selective laser melting of stainless steel powder[J]. Electromachining & Mould, 2010(s1): 67-72.
史玉升, 李瑞迪, 章文献, 等. 不锈钢粉末的选择性激光熔化快速成形工艺研究[J]. 电加工与模具, 2010(s1): 67-72.

【32】Wang B, Lin X, Ma L, et al. A thermo-mechanical finite element method simulation of 304L stainless steel during laser solid forming with pre-deformation substrate[J]. Chinese Journal of Lasers, 2010, 37(1): 242-249.
王波, 林鑫, 马良,等. 基板预变形下304L不锈钢激光立体成形过程热弹塑性有限元分析[J]. 中国激光, 2010, 37(1): 242-249.

【33】Bailey N S, Katinas C, Shin Y C. Laser direct deposition of AISI H13 tool steel powder with numerical modeling of solid phase transformation, hardness,and residual stresses[J]. Journal of Materials Processing Technology, 2017, 247: 223-233.

【34】Wang W F, Zheng Y G. Microstructure and properties of 17-4PH steel by laser solid solution and aging treatment and its cavitation erosion resistance[J]. Transactions of Materials & Heat Treatment, 2013, 34(9): 155-159.
王维夫, 郑玉贵. 17-4PH钢激光固溶-时效强化及抗空蚀性能[J]. 材料热处理学报, 2013, 34(9): 155-159.

【35】Wu Q L, Song F M, Sun Y S, et al. Microstructure and properties of TiC strengthened 17-4PH stainless steel[J]. Hot Working Technology, 2007, 36(16): 39-42.
吴钱林, 宋凤明, 孙扬善, 等. TiC弥散强化17-4PH钢的显微组织和性能[J]. 热加工工艺, 2007, 36(16): 39-42.

【36】Hu Z, Zhu H, Zhang H, et al. Experimental investigation on selective laser melting of 17-4PH stainless steel[J]. Optics & Laser Technology, 2017, 87: 17-25.

【37】Fang J X, Dong S Y, Wang Y J, et al. The effects of solid-state phase transformation upon stress evolution in laser metal powder deposition[J]. Materials & Design, 2015, 87: 807-814.

【38】Song W W, Min Y A,Wu X C. Study on carbides and their evolution in H13 hot work steel[J]. Transactions of Materials & Heat Treatment, 2009, 30(5): 122-126.
宋雯雯, 闵永安, 吴晓春. H13钢中的碳化物分析及其演变规律研究[J]. 材料热处理学报, 2009, 30(5): 122-126.

【39】Bailey N S, Katinas C, Shin Y C. Laserdirect deposition of AISI H13 tool steel powder with numerical modeling of solid phase transformation, hardness, and residual stresses[J]. Journal of Materials Processing Technology, 2017, 247: 223-233.

【40】Ye S Y, Liu J Y, Yang W. Quality of H13 alloy coating on H13 steel prepared by laser cladding[J]. Surface Technology, 2015, 44(8): 81-85.
叶四友, 刘建永, 杨伟. H13钢表面激光熔覆H13合金涂层质量研究[J]. 表面技术, 2015, 44(8): 81-85.

【41】Telasang G, Majumdar J D, Padmanabham G, et al. Structure-property correlation in laser surface treated AISI H13 tool steel for improved mechanical properties[J]. Materials Science & Engineering A, 2014, 599: 255-267.

【42】张莹. 西北工业大学凝固技术国家重点实验室在激光立体成形技术方面取得重要研究进展--金属3D打印技术[J]. 中国材料进展, 2013, 32(8): 508.

【43】Dong C, Wang H M. Microstructures and mechanical properties of ultra-high strength steel 300M fabricated by laser melting deposition[J]. Heat Treatment of Metals, 2008, 33(9): 1-5.
董翠, 王华明. 激光熔化沉积300M超高强度钢组织与力学性能[J]. 金属热处理, 2008, 33(9): 1-5.

【44】Liu F G, Lin X, Song K, et al. Microstructure and mechanical properties of laser forming repaired 300M steel[J]. Acta Metallurgical Sinica, 2017, 53(3): 325-334.
刘丰刚, 林鑫, 宋衎,等. 激光修复300M钢的组织及力学性能研究[J]. 金属学报,2017, 53(3): 325-334.

【45】姚妮娜, 彭雄厚. 增材制造金属粉体的制备方法[J]. 四川有色金属, 2013, (4): 48-51.

【46】Gerking L. Powder from metal and ceramic melts by laminar gas streams at supersonic speeds[J]. PMI Powder Metallurgy International, 1993, 25(2): 59-65.

【47】Liang R, Dang X A, Zhao X J, et al. Status of Atomization Nozzle Design for Micron Metal Powders[J]. Nonferrous Metals, 2008, 60(1): 36-40.
梁荣, 党新安, 赵小娟,等. 微细金属粉末雾化喷嘴的设计进展[J]. 有色金属工程, 2008, 60(1): 36-40.

【48】陈欣. 紧耦合气雾化流场结构和雾化机理研究[D]. 长沙: 中南大学, 2007.

【49】He W W, Jia W P, Yang G Y, et al. Research progress in preparation of TiAl-alloyed power[J]. Titanium Industry Progress,2012, 29(4): 1-6
贺卫卫, 贾文鹏, 杨广宇, 等. TiAl预合金粉末制备的研究进展[J]. 钛工业进展, 2012, 29(4): 1-6.

【50】刘娜, 李周, 袁华, 等.一种粉体高温合金的熔炼方法: CN103589912A[P]. 2014-02-19.

【51】Qin S S, Yu Y, Zeng G Y, et al. Research on the preparation of metal powder for 3D printing[J]. Powder Metallurgy Industry, 2016, 26(5): 21-24.
覃思思, 余勇, 曾归余, 等. 3D打印用金属粉末的制备研究[J]. 粉末冶金工业, 2016, 26(5): 21-24.

【52】Chen S Y, Dong H H, Liu C S, et al. TC4 alloy powder prepared by electrode induction melting gas atomization for laser 3D printing[J]. Journal of Northeastern University (Natural Science Edition), 2017, 38(4): 497-501.
陈岁元, 董欢欢, 刘常升, 等. EIGA法制备激光3D打印用TC4合金粉末[J]. 东北大学学报(自然科学版), 2017, 38(4): 497-501.

【53】Wei M W, Chen S Y, Guo K K, et al. Preparation of TA15 Titanium alloy powder by EIGA for laser 3D printing[J]. Materials Review, 2017, 31(6): 64-67.
魏明炜, 陈岁元, 郭快快, 等. EIGA法制备激光3D打印用TA15钛合金粉末[J]. 材料导报, 2017, 31(6): 64-67.

【54】赵风琴, 王长京. 等离子旋转电极制粉设备中的等离子发生器装置的设计与制造[J]. 稀有金属材料与工程, 1988, (6): 69-73.

【55】杨启云, 吴玉道, 仲守亮. 增材制造专用金属粉体的特性研究[C]. 全国粉体冶金学术会议暨海峡两岸粉体冶金技术研讨会. 2015.

【56】Chen Y W, Guan H J, Li B, et al. Characteristics and applications of metal powders for 3D printing[J]. Materials Review, 2017(s1): 98-101.
程玉婉, 关航健, 李博, 等. 金属3D打印技术及其专用粉末特征与应用[J]. 材料导报, 2017(s1): 98-101.

【57】Fan L K. Analysis on key factors of metal powders for additive manufacturing[J]. Physical Testing and Chemical Analysis Part A: Physical Testing, 2015, 51(7): 480-482.
范立坤. 增材制造用金属粉末材料的关键影响因素分析[J]. 理化检验-物理分册, 2015, 51(7): 480-482.

【58】Nanosteel. Bldrmetal for powder bed fusion[EB/OL]. (2017-09-07)[2017-09-20]. https://nanosteelco.com/products/additive-manufacturing/powder-bed-fusion/

【59】Concept Laser GmbH. CL 20ES stainless steel[EB/OL]. (2017-09-01)[2017-09-20]. https://www.concept-laser.de/en/products/materials.html

引用该论文

Dong Shiyun,Yan Shixing,Feng Xiangyi,Li Yongjian,Chen Suiyuan. Research Status of Steel Powder Material for Laser Additive Manufacturing[J]. Laser & Optoelectronics Progress, 2018, 55(1): 011407

董世运,闫世兴,冯祥奕,李永健,陈岁元. 激光增材制造钢粉体材料研究现状[J]. 激光与光电子学进展, 2018, 55(1): 011407

您的浏览器不支持PDF插件,请使用最新的(Chrome/Fire Fox等)浏览器.或者您还可以点击此处下载该论文PDF