红外技术, 2018, 40 (2): 183, 网络出版: 2018-03-21  

聚乙烯材料厚度的太赫兹检测实验分析

Experimental Analysis of Terahertz Detection of Polyethylene Thickness
作者单位
1 中国计量大学 机电工程学院,浙江 杭州 310018
2 中国特种设备检测研究院,北京 100029
3 中国计量大学 质量与安全工程学院,浙江 杭州 310018
摘要
在聚乙烯材料管道生产制造过程中,管道厚度精确测量是影响管道生产质量的一个重要技术问题。本文简述了使用太赫兹时域光谱首先对标准厚度样品的折射率进行测量,再使用其折射率对未知厚度样品进行厚度测量,通过测量在介质中某一点太赫兹时域波形图峰值时间差,建立厚度测量模型,实现对折射率的以及厚度的测量方法,根据实验对其检测精度以及影响因素进行分析得出此实验方法相对误差已达到2%以下,此精度已高于国标GB15558.1 中4%的要求。
Abstract
In the process of polyethylene pipe production, the precise measurement of the pipe thickness is an important technical issue affecting the quality of production. This paper describes the use of terahertz time-domain spectroscopy, in which the refractive index of a standard sample of known thickness is first measured, and then the unknown sample thickness is determined using its refractive index. By measuring the peak time difference of the terahertz time-domain waveform at a certain point in the medium, a thickness measurement model is established for measuring the refractive index and thickness. The experimental data are used to analyze the detection accuracy and influencing factors. The relative error of our experimental method is less than 2%, an accuracy higher than the requirement of 4%, as per the national standard GB15558.1.

郝元, 俞跃, 王强, 谷小红. 聚乙烯材料厚度的太赫兹检测实验分析[J]. 红外技术, 2018, 40(2): 183. HAO Yuan, YU Yue, WANG Qiang, GU Xiaohong. Experimental Analysis of Terahertz Detection of Polyethylene Thickness[J]. Infrared Technology, 2018, 40(2): 183.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!