中国激光, 2018, 45 (4): 0401007, 网络出版: 2018-04-13   

高峰值功率高光束质量光纤-固体混合放大激光系统 下载: 867次

High Peak Power and High Beam Quality Fiber-Solid Hybrid Amplification Laser System
作者单位
1 浙江大学现代光学仪器国家重点实验室, 浙江 杭州 310027
2 衢州学院电气与信息工程学院, 浙江 衢州 324000
3 江苏曙光光电有限公司, 江苏 扬州 225009
摘要
高峰值功率以及高光束质量的激光光源在激光加工等领域具有重要的应用价值。利用重复频率为50 kHz、脉宽为3.9 ps、平均功率为10.9 mW的光纤种子光源, 经过两级固体双通放大, 最终得到平均功率为27.65 W, 峰值功率达到65 MW的激光输出。第一级放大器为端面抽运Nd∶YVO4放大级, 第二级放大器为侧面抽运Nd∶YAG放大级。通过利用球差补偿理论设计的双通放大结构以及调节放大级中的填充因子, 控制最终激光输出的光束质量, 得到输出激光的光束质量因子M2=1.30。
Abstract
High peak power and high beam quality laser is vitally valuable for applications in laser machining and other fields. A fiber laser with repetition frequency of 50 kHz, pulse width of 3.9 ps, and average power of 10.9 mW is used as the seed source. The average output power of 27.65 W is obtained in double-passing amplifier of two stages, with the pulse peak power of 65 MW. The first amplifier stage is end-pumped Nd∶YVO4 solid amplifier, and the second is side-pumped Nd∶YAG solid amplifier. The beam quality is preserved by a double-passing configuration for spherical-aberration compensation. By optimizing the beam filling factor in each solid amplifier, the M2 factor of the output beam reaches 1.30 finally.

汪勇, 刘斌, 叶志斌, 徐霜馥, 唐超, 张翔, 郑峰, 刘崇, 刘东, 项震. 高峰值功率高光束质量光纤-固体混合放大激光系统[J]. 中国激光, 2018, 45(4): 0401007. Wang Yong, Liu Bin, Ye Zhibin, Xu Shuangfu, Tang Chao, Zhang Xiang, Zheng Feng, Liu Chong, Liu Dong, Xiang Zhen. High Peak Power and High Beam Quality Fiber-Solid Hybrid Amplification Laser System[J]. Chinese Journal of Lasers, 2018, 45(4): 0401007.

本文已被 4 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!