光学 精密工程, 2018, 26 (3): 654, 网络出版: 2018-04-25   

2 m级望远镜跟踪架控制系统动态性能分析

Dynamic analysis of two meters telescope mount control system
作者单位
中国科学院 长春光学精密机械与物理研究所, 吉林 长春 130033
摘要
为了增强望远镜的抗风载扰动能力, 提高望远镜跟踪架的跟踪精度, 本文对2 m望远镜跟踪架伺服控制系统的动态性能进行了测试和分析。首先, 采用正弦扫描信号对望远镜跟踪架的结构和伺服系统进行了频率特性测试; 其次, 采用基于观测器/卡尔曼滤波器的辨识算法, 对跟踪架控制系统的频率特性进行了模型辨识; 最后, 依据辨识获得的控制模型设计了位置和速度控制器, 然后对2 m望远镜跟踪架伺服控制系统进行了目标观测实验, 实验结果表明:当跟踪最大速度为3.5 (°)/s, 最大加速度为1 (°)/s2的目标时, 方位轴和俯仰轴的最大跟踪误差均小于4.5", 跟踪误差的RMS值分别为0.378 6"和0.151 6", 实验验证了跟踪架控制系统的良好性能。
Abstract
In order to enhance the ability of disturbance rejection for the telescope, and improve the tracking accuracy of the telescope mount control system, this paper analysis the dynamic of mount control system for the two meters telescope. Firstly, the frequency response of telescope mount control system is test using swept sine. Secondly, the Observer/Klaman filter algorithm is employed to identify the model for the mount control system. Finally, the position controller and speed controller are designed based on the mount control model. The experimental results of target observation show that max tracking errors of the azimuth and elevation axis are less than 4.5", and the tracking error RMS are 0.378 6" and 0.151 6", when the target moving with the max speed 3.5 (°)/s and the max acceleration 1 (°)/s2. The experiments verify the good dynamic of telescope mount control system.

邓永停, 李洪文, 陈涛. 2 m级望远镜跟踪架控制系统动态性能分析[J]. 光学 精密工程, 2018, 26(3): 654. DENG Yong-ting, LI Hong-wen, CHEN Tao. Dynamic analysis of two meters telescope mount control system[J]. Optics and Precision Engineering, 2018, 26(3): 654.

本文已被 8 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!