光学学报, 2018, 38 (6): 0616001, 网络出版: 2018-07-09  

形貌可控Eu 3+掺杂氧化钼锌水合物的发光性能

Photoluminescence Performance of Morphology-Tunable Eu 3+-doped Zinc Molybdenum Oxide Hydrate
作者单位
1 南通大学电子信息学院, 江苏 南通 226019
2 兴县教育局瓦塘教办, 山西 兴县 033600
3 南通大学通科微电子学院, 江苏 南通 226000
摘要
通过共沉淀法,在室温下合成了Eu 3+掺杂氧化钼锌水合物的前驱体。研究了烧结温度对该前驱体的微结构和光致发光性能的影响。研究结果表明,在约400 ℃温度下,通过低成本地烧结Eu 3+掺杂水合物前驱体,可得到Eu 3+掺杂的纳米ZnMoO4结构。
Abstract
The precursor of Eu 3+-doped zinc molybdenum oxide hydrate is synthesized at the room temperature by using the co-precipitation method. The influences of sintering temperature on the microstructure and photoluminescence performance of this precursor are investigated. The research results show that the Eu 3+-doped ZnMoO4 nanostructure can be obtained by sintering the precursor of Eu 3+-doped zinc molybdenum oxide hydrate with a low cost and at about the temperature of 400 ℃.

马青兰, 马树清, 邵海宝, 邓洪海, 王志亮, 黄静, 尹海宏, 张振娟. 形貌可控Eu 3+掺杂氧化钼锌水合物的发光性能 [J]. 光学学报, 2018, 38(6): 0616001. Qinglan Ma, Shuqing Ma, Haibao Shao, Honghai Deng, Zhiliang Wang, Jing Huang, Haihong Yin, Zhenjuan Zhang. Photoluminescence Performance of Morphology-Tunable Eu 3+-doped Zinc Molybdenum Oxide Hydrate [J]. Acta Optica Sinica, 2018, 38(6): 0616001.

引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!