光通信研究, 2018 (2): 44, 网络出版: 2018-07-30  

基于REC技术的氮化镓激光器仿真分析

Simulation and Analysis of GaN Laser based on REC Technology
作者单位
南京邮电大学 光电工程学院,南京 210046
摘要
针对重构等效啁啾(REC)技术是否适用于氮化镓激光器的问题,提出了一种基于该技术的405 nm波段分布反馈(DFB)半导体激光器。基于传输矩阵法对该结构激光器的光学性能进行了仿真分析。仿真结果表明,利用该技术实现的激光器具有良好的光电特性,阈值电流约为25.6 mA,斜效率约为1.17 mW/mA,在30、50和70 mA的注入电流下,分别得到了404.93、404.87和404.82 nm的单模激射,边模抑制比都超过了40 dB。这一结果为此技术在氮化镓激光器上的应用提供了参考。
Abstract
In order to assess whether the Reconstruction-Equivalent-Chirp (REC) technology can be adapted to a GaN laser, a 405 nm wave band Distributed Feedback (DFB) semiconductor laser based on this technology is proposed. The optical performance of the designed laser in this paper is simulated and analyzed according to the transfer matrix method. The simulation results show that the designed laser has good photoelectric characteristics by using this technology. The threshold current is around 25.6 mA with a slope efficiency of 1.17 mW/mA. The single mode emission wavelength of 404.93, 404.87 and 404.82 nm is obtained with the injection current of 30, 50 and 70 mA respectively. The side-mode suppression ratio is over 40 dB in all cases. This result provides a reference for the application of this technology on GaN lasers.

高律, 胡芳仁. 基于REC技术的氮化镓激光器仿真分析[J]. 光通信研究, 2018, 44(2): 44. GAO Lü, HU Fang-ren. Simulation and Analysis of GaN Laser based on REC Technology[J]. Study On Optical Communications, 2018, 44(2): 44.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!