光电工程, 2018, 45 (7): 170663, 网络出版: 2018-08-04   

离轴非球面的条纹反射检测技术

The off-axis aspheric mirror testing based on the fringe reflection technique
作者单位
中国科学院光电技术研究所先进光学研制中心,四川 成都 610209
摘要
条纹反射测量技术具有动态范围大、灵敏度高的特点,通过高精度的系统标定可以获得很高的测量精度。本文研究将条纹反射测量技术应用于离轴非球面反射镜粗抛光阶段的面形检测,使用激光跟踪仪建立检测系统坐标系,然后将相机和显示屏的实测标定数据代入坐标系并在Zemax软件中建立测量装置的理想模型,通过光线追迹得到理想的屏幕像素点位置,采用相移技术可以得到实测时屏幕像素点位置,从而计算得到被测镜面形的斜率误差,最后积分得到检测结果。文中采用该方法对一块SiC 离轴非球面镜进行了实测,并与三坐标测量机的结果进行对比,验证了方法的可行性,可用于指导离轴非球面镜粗抛光阶段的加工。
Abstract
In this paper, the FRT (fringe reflection technique) is used for the off-axis aspheric surface measurement during the manufacture stage of the beginning of polish, duo to its advantage of large dynamic range and high sensitivity. The measurement system coordinate and ray trace model are build using the laser tracker, and the calibration results of the camera calibration and screen calibration are introduced into the Zemax model and the ideal screen pixel point position can be got by ray tracing. The measurement of screen pixel point position is obtained by phase-shifting technique. The slope error of the surface is calculated and final results are got by integration. The measurement results of a SiC off-axis mirror obtained by the presented method and the CMM are compared and feasibility is verified. This method can be used to guide the manufacture of off-axis aspheric surface during the beginning of the polish.

赵文川, 周敏, 刘海涛, 肖向海, 宋伟红. 离轴非球面的条纹反射检测技术[J]. 光电工程, 2018, 45(7): 170663. Zhao Wenchuan, Zhou Ming, Liu Haitao, Xiao Xianghai, Song Weihong. The off-axis aspheric mirror testing based on the fringe reflection technique[J]. Opto-Electronic Engineering, 2018, 45(7): 170663.

本文已被 1 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!