红外与激光工程, 2018, 47 (8): 0817007, 网络出版: 2018-08-29  

粗调平状态数字天顶仪定位方法研究

Research on positioning method of digital zenith camera under rough leveling state
作者单位
火箭军工程大学 兵器发射理论与技术国家重点学科实验室, 陕西 西安 710025
摘要
针对传统数字天顶仪定位方法中存在仪器需精确调平, 数据拟合模型参数求解不准确和定位迭代过程复杂的问题, 提出一种粗调平状态数字天顶仪定位方法。严格推导了水平状态下CCD图像坐标的计算式, 利用倾角仪输出值与粗调平状态下CCD图像坐标计算得到水平状态CCD图像坐标; 对粗调平状态下恒星切平面坐标进行分析, 分析结果表明粗调平状态下对应的切平面与水平状态下对应的切平面基本平行, 粗调平状态下的切平面坐标可直接用于数据拟合模型的建立; 通过抗差M估计计算数据拟合模型的参数, 抑制了粗大误差对参数解影响, 提高了数据拟合模型的准确性; 最后, 通过联立数据拟合模型方程组解算旋转轴的CCD图像坐标、剔除迭代过程中的数据拟合模型反变换以及取切平面坐标平均值的方式优化定位迭代过程, 提高定位解算效率的同时保证了数字天顶仪的定位精度。实验结果表明: 粗调平状态定位方法的定位精度与精调平状态的定位精度基本相同, 其中粗调平定位方法的定位经度精度为0.306″, 纬度精度为0.292″, 满足数字天顶仪定位精度的要求。
Abstract
A positioning method of digital zenith camera was proposed to solve the problem that the traditional positioning method required precise leveling of the instrument, the data fitting model parameter was inaccurate and the positioning iterative process was complicated. The calculation formula of CCD image coordinates in the horizontal state was derived. CCD image coordinates of the horizontal state were obtained by using the CCD image coordinates under rough leveling and the output value of the inclinometer, and the star tangent plane coordinates under rough leveling were analyzed, the analysis results showed that the star tangent plane coordinates which needn't be correct could be used to establish data fitting model. The parameters of the data fitting model were calculated by the robust estimation, which restrained the influence of rough error on the parameters and improved the accuracy of the data fitting model. In the end, positioning iterative process was optimized by solving the simultaneous equations of data fitting model to gain the CCD image coordinates of rotating axis, eliminating the inverse transformation of data fitting model and taking the average of the plane coordinates, which improved the efficiency and ensured the positioning accuracy. The experimental results showed that the positioning precision of positioning method under rough leveling is basically the same as the positioning method under fine leveling state. The accuracy of the positioning longitude under rough leveling is 0.306″, the accuracy of the latitude is 0.292″. Positioning accuracy satisfies the positioning requirement of digital zenith camera.

杨上, 周召发, 刘先一, 张辉. 粗调平状态数字天顶仪定位方法研究[J]. 红外与激光工程, 2018, 47(8): 0817007. Yang Shang, Zhou Zhaofa, Liu Xianyi, Zhang Hui. Research on positioning method of digital zenith camera under rough leveling state[J]. Infrared and Laser Engineering, 2018, 47(8): 0817007.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!