光学 精密工程, 2018, 26 (8): 1896, 网络出版: 2018-10-02   

1 470 nm大功率半导体激光溶脂仪控制系统设计

Design of control system for 1470-nm high-power semiconductor laser lipolysis device
作者单位
中国科学院 苏州生物医学工程技术研究所, 江苏 苏州 215163
摘要
为了实现大功率激光溶脂仪安全、稳定的输出, 设计了1 470 nm大功率半导体激光溶脂的控制系统。对该控制系统所采用的驱动模块、温控模块、主控模块和人机交互模块等进行了研究。首先, 采用FPGA实现恒流源的数字控制, 功率反馈闭环实现恒功率控制,以提供1 470 nm大功率激光器和弱激光红光指示的驱动, 单片机负责实现RS232的协议解析。采用数字模拟PID混合控制, 根据NTC的反馈对TEC进行驱动实现激光器温度控制。设计了基于ARM Cortex-M3架构的STM32F系列微处理器主控模块和人机交互模块, 实现了相关数据的输出显示与存储、触摸屏驱动及响应以及各接口控制。最后, 利用MDK平台编写控制软件并对整机控制系统进行联调和测试。实验结果表明: 整机输出功率与设置功率的偏差小于2%, 安全性能符合国家医用电气安全通用标准的要求。该系统能够满足1 470 nm大功率半导体激光溶脂仪的稳定可靠、安全性高、抗干扰能力强等要求。
Abstract
A control system for 1470-nm high-power semiconductor laser lipolysis was designed to realize safe and stable operation. The driving module, temperature control module, main control module, and man-machine interaction module of the control system were studied. First, a field-programmable gate array and a power feedback loop were used to realize a digitally controlled constant current source and constant power control, respectively, to drive the 1470-nm high-power laser and weak laser red indicator. SCM was responsible for the implementation of RS232 protocol analysis. Second, the digital analog proportional-integral-derivative control was used to drive a thermoelectric cooler according to the feedback of the negative temperature coefficient to realize the temperature control of the laser. Then, the microprocessor-based master control module and human-computer interaction module were designed to realize the display and storage of the output data and the driving of the touch screen. Finally, the Microcontroller Development Kit platform was used to carry out intermodulation and testing of the whole machine control system. The experimental results show that the deviation between the output power and the set power is less than 2%, and the safety performance of the entire device conforms to the national standard of medical electrical safety. The proposed control system can satisfy the requirements of 1470-nm high-power semiconductor laser lipolysis and ensure high safety and strong antijamming and stabilization.

董宁宁, 崔锦江, 徐建根, 许杰. 1 470 nm大功率半导体激光溶脂仪控制系统设计[J]. 光学 精密工程, 2018, 26(8): 1896. DONG Ning-ning, CUI Jin-jiang, XU Jian-gen, XU Jie. Design of control system for 1470-nm high-power semiconductor laser lipolysis device[J]. Optics and Precision Engineering, 2018, 26(8): 1896.

本文已被 2 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!