红外, 2018, 39 (10): 12, 网络出版: 2019-01-19   

低缺陷Si基碲镉汞分子束外延工艺研究

Study of Low-defect Si-based HgCdTe Molecular Beam Epitaxy Process
作者单位
华北光电技术研究所,北京100015
摘要
随着焦平面探测器向超大面阵、小像元方向发展,对盲元率尤其连续盲元、均匀性等要求越来越高。材料表面缺陷已经成为抑制Si基碲镉汞分子束外延(Molecular Beam Epitaxial, MBE)技术在更广范围内应用的一个重要因素。通过解决MBE系统束流稳定性、束流测量的精确性和生长温度控制的稳定性共3个MBE生长碲镉汞材料精确控制的关键问题,以及通过正交试验优化生长参数,将Si基碲镉汞材料缺陷密度控制在500 cm-2以内,最优值达到57.83 cm-2。
Abstract
With the development of HgCdTe infrared focal plane arrays toward super-large sizes and small pixels, the requirements of blind pixel rate, especially continuous blind pixel and uniformity, are increasing. The surface defect has become an important factor to inhibit the application of Si-based HgCdTe molecular beam epitaxy (MBE). By solving three key problems of MBE-grown HgCdTe, namely, beam stability, beam measurement accuracy and growth temperature control stability, and by optimizing the growth parameters through orthogonal experiments, the defect density of Si-based HgCdTe materials is controlled within 500 cm-2 and the optimal value is 57.83 cm-2.

高达, 王经纬, 王丛, 吴亮亮, 刘铭. 低缺陷Si基碲镉汞分子束外延工艺研究[J]. 红外, 2018, 39(10): 12. GAO Da, WANG Jing-wei, WANG Cong, WU Liang-liang, LIU Ming. Study of Low-defect Si-based HgCdTe Molecular Beam Epitaxy Process[J]. INFRARED, 2018, 39(10): 12.

本文已被 3 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!