首页 > 论文 > 激光与光电子学进展 > 56卷 > 7期(pp:71402--1)

TiO2/CeO2对Ni基激光熔覆层组织和性能的影响

Effect of TiO2/CeO2 on Microstructures and Properties of Ni-Based Laser Cladding Layers

  • 摘要
  • 论文信息
  • 参考文献
  • 被引情况
  • PDF全文
分享:

摘要

通过同步送粉方式在Q235钢基材表面制备了添加不同质量分数纳米TiO2和CeO2的Ni基激光熔覆层,分析了熔覆层的表面形貌、显微组织和物相组成,并测定了熔覆层的硬度和耐腐蚀性。结果表明,在Ni基合金粉末中同时加入TiO2和CeO2,可以充分发挥二者的性能,得到组织均匀细密、无裂纹、耐腐蚀性较高的熔覆层,也可改善Ni基激光熔覆层的组织结构并提高其性能。

Abstract

To improve the microstructures and properties of Ni-based laser cladding layers, the Ni-based laser cladding layers with different mass fractions of nano TiO2 and CeO2 are prepared on the Q235 steel substrate surfaces by the synchronous feeding of laser cladding powder. The surface morphologies, microstructures and phase compositions of laser cladding layers are analyzed and the microhardness and corrosion resistance of laser cladding layers are measured as well. The research results show that the simultaneous addition of TiO2 and CeO2 in the Ni-based alloy powder can fully integrate the properties of both and make well-distributed, fine, crack-free and corrosion-resistant laser cladding layers obtained.

Newport宣传-MKS新实验室计划
补充资料

中图分类号:TN249

DOI:10.3788/lop56.071402

所属栏目:激光器与激光光学

基金项目:国家自然科学基金(51575237)、江苏出入境检验检疫局科技计划(2018KJ04)

收稿日期:2018-09-03

修改稿日期:2018-09-21

网络出版日期:2018-09-27

作者单位    点击查看

任仲贺:江南大学江苏省食品先进制造装备技术重点实验室, 江苏 无锡 214122
武美萍:江南大学江苏省食品先进制造装备技术重点实验室, 江苏 无锡 214122
李广阳:德纳(无锡)技术有限公司, 江苏 无锡 214112
夏思海:江南大学江苏省食品先进制造装备技术重点实验室, 江苏 无锡 214122
唐又红:苏州出入境检验检疫局, 江苏 苏州 215021

联系人作者:武美萍(wmp169@jiangnan.edu.cn)

【1】Xu B S. Remanufacture engineering and its development in China[J]. China Surface Engineering, 2010, 23(2): 1-6.
徐滨士. 中国再制造工程及其进展[J]. 中国表面工程, 2010, 23(2): 1-6.

【2】Wei S G, Cheng D B, Sundin E, et al. Motives and barriers of the remanufacturing industry in China[J]. Journal of Cleaner Production, 2015, 94: 340-351.

【3】Sun L, Wei C Q, Sui X M, et al. Effects of SiC particle size on microstructures and properties of TiNi based cladding layers[J]. Chinese Journal of Lasers, 2018, 45(5): 0502002.
孙琳, 位超群, 隋欣梦, 等. SiC颗粒尺寸对TiNi基熔覆层组织与性能的影响[J]. 中国激光, 2018, 45(5): 0502002.

【4】Yang H B, Liu Z H, Ding Y D, et al. Preparation of Al2O3-13%TiO2 ceramic coating in the method of thermo-chemical reaction and its properties[J]. Surface Technology, 2017, 46(9): 215-222.
杨宏波, 刘朝辉, 丁逸栋, 等. 热化学反应法制备Al2O3-13%TiO2陶瓷涂层及其性能研究[J]. 表面技术, 2017, 46(9): 215-222.

【5】Xiao Y, Gu J F, Zhang J X, et al. Effects of nano-CeO2 doping on microstructure and wear performance of laser-clad Fe/Cr3C2 alloy composite coating[J]. Materials Review, 2017, 31(22): 65-69, 84.
肖轶, 顾剑锋, 张俊喜, 等. 纳米CeO2对激光熔覆Fe/Cr3C2复合涂层组织与磨损性能的影响[J]. 材料导报, 2017, 31(22): 65-69, 84.

【6】Xu B S, Zhu S H, Liu S C. Materials surface engineering[M]. Harbin: Harbin Institute of Technology Press, 2005.
徐滨士, 朱绍华, 刘世参. 材料表面工程[M]. 哈尔滨: 哈尔滨工业大学出版社, 2005.

【7】Zhang Q M, He J J, Liu W J, et al. Microstructure characteristics of ZrC-reinforced composite coating produced by laser cladding[J]. Surface and Coatings Technology, 2003, 162(2/3): 140-146.

【8】Paul C P, Gandhi B K, Bhargava P, et al. Cobalt-free laser cladding on AISI type 316L stainless steel for improved cavitation and slurry erosion wear behavior[J]. Journal of Materials Engineering and Performance, 2014, 23(12): 4463-4471.

【9】van Acker K, Vanhoyweghen D, Persoons R, et al. Influence of tungsten carbide particle size and distribution on the wear resistance of laser clad WC/Ni coatings[J]. Wear, 2005, 258(1/2/3/4): 194-202.

【10】Weng F, Yu H J, Chen C Z, et al. Fabrication of Co-based coatings on titanium alloy by laser cladding with CeO2 addition[J]. Materials and Manufacturing Processes, 2016, 31(11): 1461-1467.

【11】Zhang G Y, Wang C L, Gao Y. Mechanism of rare earth CeO2 on the Ni-based laser cladding layer of 6063 Al surface[J]. Rare Metal Materials and Engineering, 2016, 45(4): 1003-1007.
张光耀, 王成磊, 高原. 稀土CeO2在6063Al表面Ni基激光熔覆中的作用机制[J]. 稀有金属材料与工程, 2016, 45(4): 1003-1007.

【12】Wu D J, Chen Y X, Lu W F, et al. Dilution characters of Al2O3-13wt%TiO2 coating by direct laser cladding on titanium alloy[J]. Rare Metal Materials and Engineering, 2012, 41(12): 2105-2108.
吴东江, 陈云啸, 卢卫锋, 等. 钛合金表面直接激光熔覆Al2O3-13%TiO2涂层互熔稀释特性[J]. 稀有金属材料与工程, 2012, 41(12): 2105-2108.

【13】Wang K M, Lei Y P, Wei S Z, et al. Effect of WC content on microstructure and properties of laser cladding Ni-based WC composite coating[J]. Transactions of Materials and Heat Treatment, 2016, 37(7): 172-179.
王开明, 雷永平, 魏世忠, 等. WC含量对激光熔覆Ni基WC复合涂层组织和性能的影响[J]. 材料热处理学报, 2016, 37(7): 172-179.

【14】Tan C W, Lu Q S, Chen B, et al. Influence of laser power on microstructure and mechanical properties of laser welded-brazed Mg to Ni coated Ti alloys[J]. Optics & Laser Technology, 2017, 89: 156-167.

【15】Zhang Y, Song B H, Xue F. Influence of dilution on microstructure and properties in Ni based laser clad coating[J]. Applied Laser, 2016, 36(3): 259-264.
张洋, 宋博瀚, 薛峰. 稀释率对镍基合金激光熔覆层组织和性能的影响[J]. 应用激光, 2016, 36(3): 259-264.

【16】Pan H, Zhao J F, Liu Y L, et al. Controllability research on dilution ratio of nickel-based superalloy by laser cladding reparation[J]. Chinese Journal of Lasers, 2013, 40(4): 0403007.
潘浒, 赵剑峰, 刘云雷, 等. 激光熔覆修复镍基高温合金稀释率的可控性研究[J]. 中国激光, 2013, 40(4): 0403007.

【17】Chen J F, Chen G Y, Sun L Y, et al. Investigation of dilution ratio and strengthening effect of laser cladded coating on H13 steel[J]. Laser Technology, 2017, 41(4): 596-601.
陈菊芳, 陈国炎, 孙凌燕, 等. H13钢表面激光熔覆层稀释率及强化效果研究[J]. 激光技术, 2017, 41(4): 596-601.

【18】Adebiyi D I, Popoola A P I. Mitigation of abrasive wear damage of Ti-6Al-4V by laser surface alloying[J]. Materials & Design, 2015, 74: 67-75.

【19】Yu X X, Yin D F, Yu Z M, et al. Effects of cerium addition on solidification behaviour and intermetallic structure of novel Al-Cu-Li alloys[J]. Rare Metal Materials and Engineering, 2016, 45(6): 1423-1429.

【20】Chen R, Xu Q Y, Liu B C. Cellular automaton simulation of three-dimensional dendrite growth in Al-7Si-Mg ternary aluminum alloys[J]. Computational Materials Science, 2015, 105: 90-100.

【21】Shu X Y, Hu L L, Li G F, et al. High-temperature oxidation resistance of the Ni60Ti alloy: An experimental and first-principles study[J]. Journal of Alloys and Compounds, 2017, 706: 297-304.

【22】Chao M J, Liang E J, Zhao D. Effect of TiO2 on the laser cladding layers of Ni-based alloy on 45# steel[J]. Chinese Journal of Lasers, 2003, 30(10): 947-952.
晁明举, 梁二军, 赵栋. TiO2对45#钢表面激光熔覆镍基合金的影响[J]. 中国激光, 2003, 30(10): 947-952.

【23】Li J, Li H, Yu H D, et al. Research on preparation and corrosion resistance of superhydrophobic surfaces on carbon steels[J]. China Mechanical Engineering, 2016, 27(23): 3241-3246.
李晶, 李红, 于化东, 等. 碳钢超疏水表面制备及其耐腐蚀性研究[J]. 中国机械工程, 2016, 27(23): 3241-3246.

【24】Liu Y X, Bian D, Zhao Y W, et al. Anti-corrosion performance of chemically bonded phosphate ceramic coatings reinforced by nano-TiO2[J]. Journal of the Mechanical Behavior of Biomedical Materials, 2018, 86: 208-214.

【25】Lü X Q, Chen Y X. Effect of hydrogen traps on diffusion of hydrogen in SM490B clean steel[J]. Shanghai Metals, 2013, 35(5): 14-18.
吕学奇, 陈业新. 氢陷阱对纯净钢SM490B中氢扩散行为的作用[J]. 上海金属, 2013, 35(5): 14-18.

引用该论文

Ren Zhonghe,Wu Meiping,Li Guangyang,Xia Sihai,Tang Youhong. Effect of TiO2/CeO2 on Microstructures and Properties of Ni-Based Laser Cladding Layers[J]. Laser & Optoelectronics Progress, 2019, 56(7): 071402

任仲贺,武美萍,李广阳,夏思海,唐又红. TiO2/CeO2对Ni基激光熔覆层组织和性能的影响[J]. 激光与光电子学进展, 2019, 56(7): 071402

您的浏览器不支持PDF插件,请使用最新的(Chrome/Fire Fox等)浏览器.或者您还可以点击此处下载该论文PDF