应用激光, 2019, 39 (1): 54, 网络出版: 2019-04-16  

农耕刀表面激光再制造涂层及其组织研究

Laser Remanufacturing Layer and Microstructure Characteristic of Farm Tools Steel
作者单位
苏州大学机电工程学院激光加工中心, 江苏 苏州 215021
摘要
农机刀具易于磨损的特点, 采用激光再制造的方法对农耕刀具表面制备NiCr+WC涂层, 并对涂层和涂层与基材的界面显微组织进行了分析, 最后通过Abaqus对再制造层及其界面的温度场进行了模拟。实验结果表明, 通过激光再制造方法可以成功制备出与基材呈良好冶金结合的耐磨强化涂层, 通过SEM观察发现涂层的WC与NiCr合金形成了良好的复合材料, 涂层中晶粒细化, 硬质颗粒WC均匀分布在NiCr合金基体上, 形成了良好的结合界面, 模拟结果与实验结果的温度场分布具有一致性。
Abstract
According to the feature of the easy wear of agricultural machine tools, use laser remanufacturing method to produce NiCr+WC coating on the surface of farm tools steel. The microstructure of the coating and the interface between the coating and the substrate was analyzed. The temperature field of the remanufacturing layer and its interface was simulated by Abaqus. The experimental results show that using laser remanufacturing method can successfully prepare a wear-resistant layer with good metallurgical bonding with the substrate. The SEM analysis shows that WC of coating and NiCr alloy form a good composite material, and the grains in the coating are refined. The hard WC particles are evenly distributed on NiCr alloy base material, forming a good bonding interface. The simulation results are consistent with the temperature field distribution of the experimental results.

产玉飞, 张敏, 陈长军. 农耕刀表面激光再制造涂层及其组织研究[J]. 应用激光, 2019, 39(1): 54. Chan Yufei, Zhang Min, Chen Changjun. Laser Remanufacturing Layer and Microstructure Characteristic of Farm Tools Steel[J]. APPLIED LASER, 2019, 39(1): 54.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!