为了监控3维玻璃上聚对苯二甲酸乙二醇酯(PET)复合衬底介质膜膜厚, 采用将PET复合衬底等效为单层基底材料的建模分析方法, 通过椭偏测量技术实现了复杂衬底上TiO2梯度折射率材料薄膜厚度的检测。结果表明, 采用该方法测量的PET复合衬底上TiO2梯度折射率薄膜厚度为212.48nm, 扫描电子显微镜的测量结果为211nm, 结果非常准确。以TiO2为例验证了等效衬底方法, 该方法也同样适用于其它介质膜。等效衬底法可实现PET复合衬底上的TiO2薄膜厚度的高精度测量表征, 对镀膜工艺过程监控具有重要意义。

In order to monitor the film thickness of polyethylene terephthalate (PET) composite substrate on 3-D glass, modeling analysis method of PET composite substrates equivalent to single-layer substrates was adopted. The thickness measurement of titanium dioxide gradient refractive index material thin films on complex substrates was realized by ellipsometry. The result show that, the thickness of titanium dioxide gradient refractive index films on PET composite substrates is 212.48nm by this method. The results of scanning electron microscopy is 211nm. The result is very accurate. The equivalent substrate method is validated by taking titanium dioxide as an example. The method is also applicable to other dielectric films. This method can measure and characterize the thickness of titanium dioxide thin films on PET composite substrates with high accuracy, and is of great significance for monitoring the coating process.