红外与激光工程, 2019, 48 (4): 0422002, 网络出版: 2019-07-23   

小芯径多模光纤拉曼分布式温度传感器

Raman distributed temperature sensor using multimode fiber with reduced core size
作者单位
1 长飞光纤光缆股份有限公司 光纤光缆制备技术国家重点实验室, 湖北 武汉430074
2 上海交通大学 区域光纤通信网与新型光通信系统国家重点实验室, 上海 200240
摘要
设计并制作了一种用于拉曼分布式温度传感的具有大有效模场面积和低模式色散的渐变折射率的小芯径多模光纤, 同时达到了高空间分辨率和高温度分辨率。在现有的拉曼分布式温度传感系统基础上, 测量了使用不同传感光纤和注入条件下的温度和空间分辨率。在满注入工作模式下, 基于小芯径多模光纤的拉曼分布式温度传感器在25 km处达到了1 ℃的温度分辨率, 空间分辨率的劣化仅为0.13 m, 作为对比, 使用多模光纤的拉曼分布式温度传感器的空间分辨率劣化了1.58 m。在单模注入条件下, 基于小芯径多模光纤的拉曼分布式温度传感器在25 km处达到了4.7 ℃的温度分辨率, 相对使用单模光纤有2.2 ℃的提升, 同时空间分辨率没有劣化。
Abstract
A graded-index multimode fiber (GI-MMF) with reduced core size was designed and fabricated with large effective mode area and low intermodal dispersion for Raman distribution temperature sensor (RDTS) to simultaneously achieve high spatial and temperature resolution. In experiment, the temperature and spatial resolution of the RDTS was measured using different types of fibers under different launch conditions based on a commercially available RDTS system. By using the GI-MMF under the overfilled launch condition, a 1 ℃ temperature resolution was achieved with a spatial resolution degradation of 0.13 m at the distance of 25 km. The spatial resolution degradation using the standard MMF is 1.58 m in comparison. Moreover, the RDTS using the proposed GI-MMF under the single mode launch condition achieved a temperature resolution of 4.7 ℃ temperature resolution at the distance of 25 km with a 2.2 ℃ improvement and no degradation on spatial resolution compared with that using the standard SMF.

何祖源, 刘银萍, 马麟, 杨晨, 童维军. 小芯径多模光纤拉曼分布式温度传感器[J]. 红外与激光工程, 2019, 48(4): 0422002. He Zuyuan, Liu Yinping, Ma Lin, Yang Chen, Tong Weijun. Raman distributed temperature sensor using multimode fiber with reduced core size[J]. Infrared and Laser Engineering, 2019, 48(4): 0422002.

本文已被 4 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!