中国光学, 2019, 12 (4): 820, 网络出版: 2019-09-10   

10 kW级直接输出半导体激光熔覆光源的研制与热效应分析

10 kW CW diode laser cladding source and thermal effect
作者单位
1 中国科学院 长春光学精密机械与物理研究所, 吉林 长春 130033
2 哈尔滨工程大学 理学院, 黑龙江 哈尔滨 150001
摘要
针对目前工业领域对激光熔覆、激光热处理的应用需求, 研制了10 kW级直接输出半导体激光熔覆光源。采用半导体激光叠阵为单元器件, 将偏振合成技术和波长合成技术相结合, 将2只915 nm和2只976 nm半导体激光叠阵进行合成, 当工作电流为122 A时, 最大输出功率达到10 120 W, 电-光转换效率为46%。实验中还对光源内部的易损光学元件的热效应进行了模拟分析并设计有效的散热结构, 使其最高温度从4422 K下降到320 K, 同时对应的热应力从754 MPa下降到14 MPa, 大幅提升了激光光源的可靠性。
Abstract
Aiming at satisfying demands in applications of laser cladding and heat treatment, a source for diode lasers with a continuous output power of 10 kW was developed. By taking diode laser stack as unit device, two diode laser stacks of 915 nm and two of 976 nm were utilized and combined using polarization combination and wavelength combination technology. At an input current of 122 A, the maxmum output power and the total electrical-optical conversion efficiency of this laser cladding source were 10 200 W and 46%, respectively. The thermal effect of key optical elements in the laser source was analyzed and an efficient thermal dissipation structure was designed. The maximum temperature of the lens decreased from 4422 K to 320 K and the corresponding maximum von Mises stress reduced from 754 MPa to 14 MPa. This greatly improved the reliability of the laser source .

林星辰, 张亚维, 朱洪波, 刘云, 秦莉, 宁永强, 王立军. 10 kW级直接输出半导体激光熔覆光源的研制与热效应分析[J]. 中国光学, 2019, 12(4): 820. LIN Xing-chen, ZHANG Ya-wei, ZHU hong-bo, LIU Yun, QIN Li, NING Yong-qiang, WANG Li-jun. 10 kW CW diode laser cladding source and thermal effect[J]. Chinese Optics, 2019, 12(4): 820.

本文已被 4 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!