光电工程, 2020, 47 (2): 190423, 网络出版: 2020-03-06  

金属材料水导激光加工实验研究

Experimental study on laser water-jet machining of metal material
曹治赫 1,2,*乔红超 1,2赵吉宾 1,2
作者单位
1 中国科学院沈阳自动化研究所, 辽宁沈阳 110179
2 中国科学院机器人与智能制造创新研究院, 辽宁沈阳 110179
摘要
金属材料的激光加工目前正向着低表面粗糙度、小热影响区及大深径比结构的趋势发展。新近发展了一种基于激光-水射流耦合原理的水导激光加工技术, 本文阐述了水导激光加工技术的基本原理及其相对于传统激光加工方法的优势, 基于激光 -水射流耦合原理构建了一套水导激光加工设备, 对多种金属材料进行了水导激光加工实验。利用超景深显微镜对加工工件表面进行了观测与分析, 发现两种金属材料加工得到的盲孔边缘规则圆滑, 切槽的边缘平直无毛刺, 没有热影响区。实验结果说明对金属材料的水导激光精密加工具有可行性且有重要的应用价值。
Abstract
The development direction of metal material laser processing is to achieve small roughness, less heat-affected zone and high depth-diameter ratio. Recently, a kind of water-conducting laser processing technology based on laser water-jet coupling technology has been developed. The basic principle of water-conducting laser processing technology and its advantages over traditional laser processing methods are expounded. Based on the principle of laser water-jet coupling technology, a set of water-conducting laser processing equipment is constructed. The experiments of water-conducting laser processing for various metal materials are carried out. The surfaces of work piece are observed and analyzed by Leica DVM6 digital microscope. The edges of blind holes in two kinds of metal materials are regular and smooth, the edges of grooves are straight and without burrs, and there is no heat-affected zone in both materials. The results of experiments show that water-conducting laser processing tech-nology on metal precision machining is practical and has important application value.

曹治赫, 乔红超, 赵吉宾. 金属材料水导激光加工实验研究[J]. 光电工程, 2020, 47(2): 190423. Cao Zhihe, Qiao Hongchao, Zhao Jibin. Experimental study on laser water-jet machining of metal material[J]. Opto-Electronic Engineering, 2020, 47(2): 190423.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!