量子电子学报, 2020, 37 (2): 157, 网络出版: 2020-04-03  

用于选通成像的半导体激光器列阵光束整形技术研究

Beam shaping technology of semiconductor laser array for gated imaging
作者单位
1 安徽公安职业学院公安科技系, 安徽 合肥 230031
2 中国科学院安徽光学精密机械研究所光子器件与材料安徽省重点实验室, 安徽 合肥 230031
3 空军研究院, 北京 100085
4 中国科学技术大学, 安徽 合肥 230026
摘要
介绍了基于半导体激光器列阵的距离选通成像系统的总体组成, 针对系统的要求提出三种半导体激光器光束整形设计方案,并利用Zemax软件对三种不同结构的整形方案进行了仿真及实验对比分析。 结果表明叠层阵列宏透镜准直方案结构简单,对整形透镜的装配精度要求不高,成本低廉,但其对Bar条之间平行性和共面性要求较高; 光纤耦合阵列准直方案的光束发散角最小,但耦合损耗较大; 而基于柱状微透镜准直的叠层阵列光束整形方案具有较高的光收集效率和 较小的发散角,且工艺复杂性适中,适于远距离激光主动照明成像的工程应用。
Abstract
The whole assembly of the range-gated imaging system based on the semiconductor laser array is introduced, and three kinds of semiconductor laser beam shaping designs are proposed according to the requirements of the system. The simulation and experimental comparative analysis of the three laser beam shaping designs are carried out by using Zemax software. Results show that the stacked array macro lens collimator has the advantages of simple structure, low assembly accuracy and low cost, but it requires high parallelism and coplanarity between bars. The collimation scheme of optical fiber coupling array has the smallest beam divergence angle, but larger coupling loss. The beam shaping scheme of the stacked array based on cylindrical microlens has a high light collection efficiency, a smaller divergence angle and moderate process complexity, which is more suitable for the long-distance active lighting of the laser imaging system engineering.

张百顺, 范一松, 奚居仁, 吴碧, 郭欢, 陈春城, 郭强. 用于选通成像的半导体激光器列阵光束整形技术研究[J]. 量子电子学报, 2020, 37(2): 157. ZHANG Baishun, FAN Yisong, XI Juren, WU Bi, GUO Huan, CHEN Chuncheng, GUO Qiang. Beam shaping technology of semiconductor laser array for gated imaging[J]. Chinese Journal of Quantum Electronics, 2020, 37(2): 157.

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!