中国激光, 2019, 46 (12): 1215002, 网络出版: 2019-12-02   

利用国产光纤实现平均功率761 W、脉冲能量17.5 mJ纳秒脉冲激光输出 下载: 1371次

Nanosecond Pulse Laser Output with Average Power of 761 W and Pulse Energy of 17.5 mJ Based on Domestic Fiber
作者单位
华中科技大学武汉光电国家研究中心, 湖北 武汉 430074
摘要
基于自主研发的100/400双包层掺镱有源石英光纤,搭建了高功率主振荡功率放大(MOPA)结构纳秒调Q光纤激光器,重复频率30~60 kHz可调谐。系统中心波长为1064.08 nm。采用976 nm激光泵浦,在60 kHz时实现平均功率761 W的输出,单脉冲能量为12.6 mJ,斜率效率为83.4%,光束质量 Mx2=9.82, My2=9.02;30 kHz下平均功率为526 W,单脉冲能量为17.5 mJ,斜率效率为85%,光束质量 Mx2=8.67, My2=8.57。该光纤是目前报道的高重复频率下获得的平均功率和单脉冲能量最高的国产光纤。
Abstract
Based on home-made 100/400 double clad Yb-doped active silica fiber, a high power nanosecond Q-switched fiber laser with master oscillator power-amplifier (MOPA) structure and tunable repetition rate of 30-60 kHz is built. The center wavelength of system is 1064.08 nm. Using the 976 nm laser pumping, the output of average power of 761 W is achieved at the repetition rate of 60 kHz with a single pulse energy of 12.6 mJ, a slope efficiency of 83.4%, and a beam quality of Mx2=9.82, My2=9.02. At the repetition rate of 30 kHz, the average power is 526 W, the single pulse energy is 17.5 mJ, the slope efficiency is 85%, and the beam quality is Mx2=8.67, My2=8.57. This fiber is the reported domestic fiber with the highest average power and single pulse energy obtained at high repetition rate.

王世杰, 张志伦, 曹驰, 林贤峰, 邢颍滨, 廖雷, 李进延. 利用国产光纤实现平均功率761 W、脉冲能量17.5 mJ纳秒脉冲激光输出[J]. 中国激光, 2019, 46(12): 1215002. Shijie Wang, Zhilun Zhang, Chi Cao, XianFeng Lin, Yingbin Xing, Lei Liao, Jinyan Li. Nanosecond Pulse Laser Output with Average Power of 761 W and Pulse Energy of 17.5 mJ Based on Domestic Fiber[J]. Chinese Journal of Lasers, 2019, 46(12): 1215002.

本文已被 5 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!