激光与光电子学进展, 2017, 54 (10): 101404, 网络出版: 2017-10-09   

水辅助激光诱导等离子体背部刻蚀Pyrex7740玻璃

Water-Assisted Laser Induced Plasma Backside Etching of Pyrex7740 Glass
孙树峰 1,2,*邵勇 1
作者单位
1 温州大学中国机械工业激光精细加工与检测技术重点实验室, 浙江 温州 325000
2 青岛理工大学山东省激光绿色高效智能制造工程技术研究中心, 山东 青岛 266520
摘要
提出了水辅助激光诱导等离子体背部刻蚀Pyrex7740玻璃的方法, 制备了缩小型十字通道微流控芯片。通过理论分析和加工试验, 研究了激光能量密度和激光加工次数对平均刻蚀深度的影响, 以及刻蚀过程中去离子水的作用。研究结果表明, 平均刻蚀深度与激光能量密度和激光加工次数有较大关系; 去离子水有助于实现持续刻蚀, 制得的芯片沟槽宽度为77.8 μm, 刻蚀深度为20.4 μm, 刻蚀边缘齐整, 无明显崩边现象; 而在没有去离子水辅助的情况下, 当激光能量密度为3.4 J/cm2时, 最大刻蚀深度为2.8 μm。
Abstract
A method of water-assisted laser induced plasma backside etching of Pyrex7740 glass is proposed and a scaled-down cross-channel microfluidic chip is fabricated. The influences of laser energy density and laser processing times on the average etching depth, and the function of deionized water in the etching process are studied by means of theoretical analyses and processing experiments. The study results show that the average etching depth depends much on the laser energy density and the processing times. The deionized water is helpful for the realization of a continuous etching, and a chip with microgroove width of 77.8 μm, etching depth of 20.4 μm, a neat etching edge of no obvious damages is fabricated. However, in the absence of deionized water, the maximum etching depth is 2.8 μm under a laser energy density of 3.4 J/cm2.

孙树峰, 邵勇. 水辅助激光诱导等离子体背部刻蚀Pyrex7740玻璃[J]. 激光与光电子学进展, 2017, 54(10): 101404. Sun Shufeng, Shao Yong. Water-Assisted Laser Induced Plasma Backside Etching of Pyrex7740 Glass[J]. Laser & Optoelectronics Progress, 2017, 54(10): 101404.

本文已被 2 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!