中国激光, 2017, 44 (11): 1102005, 网络出版: 2017-11-17   

中间层对304不锈钢/铌激光焊接头组织及性能的影响 下载: 596次

Effect of Interlayer on Microstructures and Properties of 304 Stainless Steel/Nb Joints by Laser Welding
作者单位
1 江苏科技大学材料科学与工程学院, 江苏 镇江 212003
2 上海工程技术大学材料工程学院, 上海 201620
摘要
利用纯铜、纯银、纯钨、纯钒、纯钽和纯钼等不同金属材料作为填充金属, 采用预置中间层的方法, 进行了304不锈钢(304 SS)与铌的激光焊接试验。结果表明, 在被选择的填充金属中, 铜和银作为中间层可以实现304 SS与铌的焊接, 前者接头强度最高, 强度峰值达到250 MPa, 是最优填充金属; 随着铜层厚度的增加, 铜层对于Fe2Nb的阻碍作用增强, 接头强度提高, 但是铜层厚度不能过大。
Abstract
With different pure metal materials such as copper, silver, tungsten, vanadium, tantalum and molybdenum as filler metals , the experiments of laser welding of 304 stainless steel (304 SS) and niobium are carried out by using the preset interlayer method. The results show that, among all the filler metals to be selected, Cu and Ag as interlayer can be used to realize the connection between 304 SS and niobium. The joint strength with the former as interlayer is the highest which reaches up to 250 MPa, thus the optimum filler metal is Cu. The hindering effect of Cu interlayer on the formation of Fe2Nb increases with the increase of Cu interlayer thickness, and so does the strength of joints, but the Cu interlayer cannot be too thick.

石铭霄, 陈书锦, 胡庆贤, 刘大双, 周方明, 李瑞峰, 赵健. 中间层对304不锈钢/铌激光焊接头组织及性能的影响[J]. 中国激光, 2017, 44(11): 1102005. Shi Mingxiao, Chen Shujin, Hu Qingxian, Liu Dashuang, Zhou Fangming, Li Ruifeng, Zhao Jian. Effect of Interlayer on Microstructures and Properties of 304 Stainless Steel/Nb Joints by Laser Welding[J]. Chinese Journal of Lasers, 2017, 44(11): 1102005.

本文已被 1 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!