中国激光, 2018, 45 (9): 0902004, 网络出版: 2018-09-08   

激光冲击层数和氯离子浓度对AM50镁合金耐腐蚀性能的影响

Effects of Laser Shock Layer Number and Cl- Concentration on Anticorrosion Behaviors of AM50 Mg Alloys
作者单位
江苏大学机械工程学院, 江苏 镇江 212013
摘要
利用激光冲击强化技术对AM50镁合金进行了表面处理, 研究了试样在NaCl溶液中的抗应力腐蚀性能和断口形貌的变化, 并对断口进行了成分分析; 研究了激光冲击层数和氯离子浓度对AM50镁合金耐腐蚀性的影响。结果表明, 大面积激光冲击强化处理的AM50镁合金表面产生了残余压应力, 表层晶粒得到细化, AM50镁合金的抗应力腐蚀性能得到改善。AM50镁合金的抗应力腐蚀性能随激光冲击层数的增加而增强, 但随氯离子浓度的增大而减弱。
Abstract
The surface treatment of AM50 Mg alloys is conducted by the laser shock peening (LSP) technique. The resistance to tensile stress corrosion and the fracture morphologies of specimens in NaCl solution are investigated. The compositions of the fracture are also analyzed. The effects of laser shock layer number and Cl- concentration on the anticorrosion behavior of AM50 Mg alloys are researched. The results show that the large area LSP treatment to AM50 Mg alloys can induce the compressive residual stress and make the refinement of surface grains, and thus the resistance to tensile stress corrosion of AM50 Mg alloys is significantly improved. The resistance to tensile stress corrosion of AM50 Mg alloys is enhanced with the increase of laser shock layer number, but is weakened with the increase of Cl- concentration.

江崇远, 王长雨, 罗开玉, 鲁金忠. 激光冲击层数和氯离子浓度对AM50镁合金耐腐蚀性能的影响[J]. 中国激光, 2018, 45(9): 0902004. Jiang Chongyuan, Wang Changyu, Luo Kaiyu, Lu Jinzhong. Effects of Laser Shock Layer Number and Cl- Concentration on Anticorrosion Behaviors of AM50 Mg Alloys[J]. Chinese Journal of Lasers, 2018, 45(9): 0902004.

本文已被 4 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!