[1] 顾世惠. 微波固体噪声二极管频率上限和噪声输出功率性能的研究[J]. 电子学报, 1986,14(6):73-78. (GU Shihui. Study of upper frequency limit and noise output power characteristics for microwave solid state noise diodes[J]. Acta Electronica Sinica, 1986,14(6):73-78.)

[2] 张长明. 高超噪比微波固态噪声源设计[J]. 固体电子学研究与进展, 2006,26(2):194-196. (ZHANG Changming. Design of microwave solid-state noise source with high exceed noise ratio[J]. Research & Progress of SSE, 2006,26(2): 194-196.)

[3] 栾卉,赵凯. 脉冲调制固态噪声源的分析与测试[J]. 辽宁工程技术大学学报, 2007,26(4):566-569. (LUAN Hui, ZHAO Kai. Analysis and test of pulse modulated solid noise source[J]. Journal of Liaoning Technical University, 2007, 26(4):566-569.)

[4] 周宏伟,李凤. 微波噪声标准系统不确定度分析[J]. 仪器仪表标准化与计量, 2006(1):34-39. (ZHOU Hongwei,LI Feng. Analysis of the uncertainty of microwave yawp standard system[J]. Instrument and Metrological Technology, 2006(1):34-39.)

[5] 张希富,张强. 噪声源校准方法及不确定度分析[J]. 宇航计测技术, 2012,32(1):49-55. (ZHANG Xifu,ZHANG Qiang. The analysis of the measurement method and the measurement uncertainty for noise source[J]. Journal of Astronautic Metrology and Measurement, 2012,32(1):49-55.)

[6] 魏竹,张翠翠,王建忠,等. 噪声系数测量中的温度修正方法[J]. 太赫兹科学与电子信息学报, 2014,12(5):736-739. (WEI Zhu,ZHANG Cuicui,WANG Jianzhong,et al. Temperature correction methods for noise figure measurement[J]. Journal of Terahertz Science and Electronic Information Technology, 2014,12(5):736-739.)

[7] 吴明宇,杨桃丽,吴顺军,等. 2种多通道SAR/GMTI相位误差估计方法[J]. 太赫兹科学与电子信息学报, 2014,12(2):213-217. (WU Mingyu,YANG Taoli,WU Shunjun,et al. Two phase error estimation methods for multi-channel SAR/GMTI systems[J]. Journal of Terahertz Science and Electronic Information Technology, 2014,12(2):213-217.)

[8] 唐晓雷,张令坤,陈飞,等. 通道幅相误差对数字阵列天线性能影响及校准[J]. 太赫兹科学与电子信息学报, 2016, 14(4):562-566. (TANG Xiaolei,ZHANG Lingkun,CHEN Fei,et al. Effect of channel amplitude/phase errors on digital array performance and calibration[J]. Journal of Terahertz Science and Electronic Information Technology, 2016,14(4): 562-566.)