[1] . Vilar. Laser cladding[J]. Journal of Laser Applications, 1999, 11(2): 64-79.

[2] Zhong Minlin, Yang Lin, Liu Wenjin et al.. Laser direct manufacturing W/Ni telescope collimation component [J]. Chinese J. Lasers, 2004, 31(4): 482～486
钟敏霖,杨林,刘文今 等. 激光快速直接制造W/Ni合金太空望远镜准直器[J]. 中国激光, 2004, 31(4): 482～486

[3] Song Jianli, Deng Qilin, Hu Dejin et al.. Microstructure characterization and properties of laser cladding forming 316L stainless steel [J]. Chinese J. Lasers, 2005, 32(10):1441～1444
宋建丽,邓琦林,胡德金 等. 激光熔敷成形316L不锈钢组织的特征与性能[J]. 中国激光, 2005, 32(10):1441～1444

[4] Xi Mingzhe, Zhang Yongzhong, Zhang Pingzhi et al.. Influence of processing parameter on the microstructure and properties of the 316L SS fabricated by laser direct deposition [J]. Chinese J. Lasers, 2002, A29(11):1045～1048
席明哲,张永忠,章萍芝 等. 工艺参数对激光快速成型316L不锈钢组织性能的影响[J]. 中国激光, 2002, A29(11):1045～1048

[5] Yang Xichen, Li Huishan, Wang Yunshan et al.. Laser refabricating technology for repairing some of expensive and important equipment [J]. Laser & Optoelectronics Progress, 2003,40(10):53～57
杨洗陈,李会山,王云山 等. 用于重大装备修复的激光再制造技术[J]. 激光与光电子学进展, 2003, 40(10):53～57

[6] Liu Zhenxia, Huang Weidong, Wan Baitao. Investigation of basic problems of the numerical model for powder feed laser cladding [J]. Chinese J. Lasers, 2003, 30(6):567～570
刘振侠,黄卫东,万柏涛. 送粉式激光熔敷数值模型基本问题研究[J]. 中国激光, 2003, 30(6):567～570

[7] Yang Xichen, Wang Jianjun, Liu Yunwu et al.. Research on new coaxial feed laser cladding without carrying gas [J]. Chinese J. Lasers, 2004, 31(1):120～124
杨洗陈,王建军,刘运武 等. 非载气式激光同轴送粉试验研究[J]. 中国激光, 2004, 31(1):120～124

[8] Yang Xichen, Wang Jianjun, Gao Shuying et al.. A new co-axial powder feeder without carrying gas for laser direct materials deposition [C]. SPIE, 2002, 4915:153～161

[9] . A simple model of powder catchment in coaxial laser cladding[J]. Optics & Laser Technology, 1999, 31: 233-238.

[10] . lin, W. M. Steen. Design characteristics and development of a nozzle for coaxial laser cladding[J]. Journal of Laser Applications, 1998, 10(2): 55-63.