光学 精密工程, 2017, 25 (1): 84, 网络出版: 2017-03-10   

复合滑模控制在精密PMLSM激光切割运动平台的应用

Application of composite sliding mode control on motion platform of PMLSM precision laser cutting
作者单位
1 西北工业大学 自动化学院, 陕西 西安 710129
2 中国科学院长春光学精密机械研究所, 吉林 长春 130033
引用该论文

张博, 韩雪峰, 齐蓉, 张弛. 复合滑模控制在精密PMLSM激光切割运动平台的应用[J]. 光学 精密工程, 2017, 25(1): 84.

ZHANG Bo, HAN Xue-feng, QI Rong, ZHANG Chi. Application of composite sliding mode control on motion platform of PMLSM precision laser cutting[J]. Optics and Precision Engineering, 2017, 25(1): 84.

参考文献

[1] 张刚, 刘品宽, 张波, 等.直线电机精密运动平台轨迹跟踪控制器设计[J].光学 精密工程, 2013, 21(2): 371-379.

    ZHANG G, LIU P K, ZHANG B, et al.. Design of trajectory tracking controller for precision positioning table driven by linear motor [J]. Opt. Precision Eng., 2013, 21(2): 371-379. (in Chinese)

[2] 王雷, 王龙, 唐学军, 等.数字驱动系统死区效应的双刷新补偿[J].光学 精密工程, 2012, 20(12): 2712-2719.

    WANG L, WANG L, TANG X J, et al.. Double updating dead-time compensation for digital drive system [J].Opt. Precision Eng., 2012, 20(12): 2712-2719. (in Chinese)

[3] TOUNZI A, HENNERON T, MENACH Y L, et al.. 3-D approaches to determine the end winding inductances of a permanent-magnet linear synchronous motor [J]. IEEE Transactions on Magnetics. 2004, 40(2): 758-761.

[4] CHEN S L, TAN K K, HUANG S, et al.. Modeling and compensation of ripples and friction in permanent-magnet linear motor using a hysteretic relay[J]. IEEE/ASME Transactions on Mechatronics, 2010, 15(4): 586-594.

[5] ZHANG M, YIN W. Research on iterative learning control of PMLSM [C]. MACE, 2010: 5613-5616.

[6] WANG J, LI D. Application of fuzzy PID control in PMLSM servo drive system [C]. ICMA, 2015: 6-10.

[7] EL-SOUSY F F M. Intelligent mixed H2/H∞ adaptive tracking control system design using self-organizing recurrent fuzzy-wavelet-neural-network for uncertain two-axis motion control system [J].Applied Soft Computer, 2016, 41: 22-50.

[8] 高为炳.变结构控制的理论及设计方法[M]. 北京: 科学出版社, 1996.

    GAO W B. Variable Structure Control Theory And Design Method [M]. Beijing: Science Press, 1996. (in Chinese)

[9] 梅红, 王勇.快速收敛的机器人滑模变结构控制[J].信息与控制, 2009, 38(5): 552-557.

    MEI H, WANG Y. Fast convergent sliding mode variable structure control of robot [J]. Information & Control, 2009, 38(5): 552-557. (in Chinese)

[10] 张合新, 范金锁.一种新型滑模控制双幂次趋近律[J].控制与决策, 2013, 28(2): 289-293.

    ZHANG H X, FAN J S. A new double power reaching law for sliding mode control [J].Control & Decision, 2013, 28(2): 289-293. (in Chinese)

[11] 李慧洁, 蔡远利.基于双幂次趋近律的滑模控制方法[J].控制与决策, 2016, 31(3): 498-502.

    LI H J, CAI Y L. Sliding mode control with double power reaching law [J].Control and Decision, 2016, 31(3): 498-502.(in Chinese)

[12] PANAH P G, ATAEI M, MIRZAEIAN B, et al.. A robust adaptive sliding mode control for PMLSM with variable velocity profile over wide range [J].Research Journal of Applied Sciences Engineering & Technology, 2015, 10(9): 997-1006.

[13] WEI L S, CHEN Q G, LU H C, et al.. Sliding mode control of PMLSM for high speeding gringding machine [J]. Advanced Materials Research, 2012, 462: 701-706.

[14] 郭亚军.自适应反演滑模控制在火箭炮交流伺服系统中的应用[J].兵工学报, 2011, 32(4): 493-497.

    GUO Y J. Application of adaptive backstepping sliding mode control in alternative current servo system of rocket gun [J].Acta Armamentarii, 2011, 32(4): 493-497. (in Chinese)

[15] 李鹏, 马建军, 郑志强.采用幂次趋近律的滑模控制稳态误差界[J].控制理论与应用, 2011, 28(5): 619-624.

    LI P, MA J J, ZHENG ZH Q. Sliding mode control approach based on nonlinear integrator [J].Control Theory & Applications, 2011, 28(5): 619-624.(in Chinese)

[16] 常雪剑, 刘凌, 崔荣鑫.永磁同步电机非奇异快速终端可变边界层滑模控制[J].西安交通大学学报, 2015, 49(6): 53-59.

    CHANG X J, LIU L, CUI R X. A nonsigular fast terminal sliding mode controller with varying boundary layer for PMSM [J].Journal of Xian Jiaotong University, 2015, 41(6): 54-59. (in Chinese)

[17] CHEN H M, RENN J C, SU J P. Sliding mode control with varying boundary layers for an electro-hydraulic position servo system [J]. The International Journal of Advanced Manufacturing Technology, 2005, 26(1-2): 117-123.

[18] 常雪剑, 彭博, 刘凌, 等. 新型非奇异终端滑模观测器的永磁同步电机无传感器控制[J].西安交通大学学报, 2016, 50(1): 85-91.

    CHANG X J, PENG B, LIU L, et al.. A novel nonsingular terminal sliding mode observer for sensorless control of permanent magnet synchronous motor [J].Journal of XiAn Jiaotong University, 2016, 50(1): 85-91.(in Chinese)

[19] H R, JIANG Z B, KANG N. Sliding mode disturbance observer-based fractional second-order nonsingular terminal sliding mode control for pmsm position regulation system [J]. Mathematical Problems in Engineering, 2015, 2015: 1-14.

[20] POLYAKOV A, FRIDMAN L. Stability notions and Lyapunov functions for sliding mode control systems[J]. Journal of the Franklin Institute, 2014, 351(4): 1831-1865.

[21] KABZIN'SKI J. Adaptive servo control with polynomial approximation of stribeck curve [J]. Przeglad Elektrotechniczny, 2014.

[22] 韩邦成, 马纪军, 李海涛.谐波减速器的非线性摩擦建模及补偿[J].光学 精密工程, 2011, 19(5): 1095-1103.

    HAN B CH, MA J J, LI H T. Modeling and compensation of nonlinear friction in harmonic driver [J].Opt. Precision Eng., 2011, 19(5): 1095-1103.(in Chinese)

张博, 韩雪峰, 齐蓉, 张弛. 复合滑模控制在精密PMLSM激光切割运动平台的应用[J]. 光学 精密工程, 2017, 25(1): 84. ZHANG Bo, HAN Xue-feng, QI Rong, ZHANG Chi. Application of composite sliding mode control on motion platform of PMLSM precision laser cutting[J]. Optics and Precision Engineering, 2017, 25(1): 84.

本文已被 2 篇论文引用
被引统计数据来源于中国光学期刊网
引用该论文: TXT   |   EndNote

相关论文

加载中...

关于本站 Cookie 的使用提示

中国光学期刊网使用基于 cookie 的技术来更好地为您提供各项服务,点击此处了解我们的隐私策略。 如您需继续使用本网站,请您授权我们使用本地 cookie 来保存部分信息。
全站搜索
您最值得信赖的光电行业旗舰网络服务平台!