免装配机构的选区激光熔化直接成型工艺研究
苏旭彬, 杨永强, 王迪, 陈永华. 免装配机构的选区激光熔化直接成型工艺研究[J]. 中国激光, 2011, 38(6): 0603021.
Su Xubin, Yang Yongqiang, Wang Di, Chen Yonghua. Study on Process of Non-Assembly Mechanisms Directly Fabricated by Selective Laser Melting[J]. Chinese Journal of Lasers, 2011, 38(6): 0603021.
[1] E. Pessard, P. Mognol, J. Y. Hascoet et al.. Complex cast parts with rapid tooling: rapid manufacturing point of view［J］. Int. J. Adv. Manuf. Technol., 2008, 39(9-10): 898～904
[2] C. Mavroidis, K. DeLaurentis, J. Won. Fabrication of non-assembly mechanisms and robotic systems using rapid prototyping［J］. J. Mech. Des., 2001, 123(4): 516～524
[3] H. Lipson, F. Moon, J. Hai et al.. 3-D printing the history of mechanisms［J］. J. Mech. Des., 2005, 127(5): 1029～1033
[4] S. Rajagopalan, M. Cutkosky. Error analysis for the in-situ fabrication of mechanisms［J］. J. Mech. Des., 2003, 125(4): 809～822
[5] Y. Chen, Z. Chen. Major factors in rapid prototyping of mechanisms［J］. J. Key Engng. Mater., 2010, 443(6): 516～521
[6] J. Krutha, L. Froyenb, J. Vaerenbergha et al.. Selective laser melting of iron-based powder［J］. J. Mater. Processing Technol., 2004, 149(1-3): 616～622
[7] I. Yadroitsev, Ph. Bertrand, I. Smurov. Parametric analysis of the selective laser melting process［J］. Appl. Surf. Sci., 2007, 253(19): 8064～8069
[8] Weihui Wu, Yongqiang Yang, Yanlu Huang. Direct manufacturing of Cu-based alloy parts by selective laser melting［J］. Chin. Opt. Lett., 2007, 5(1): 37～40
[9] T. Childs, C. Hauser, M. Badrossamay. Selective laser sintering (melting) of stainless and tool steel powders: experiments and modeling［J］. J. Engng. Manuf., 2005, 219(4): 339～357
[10] 王迪，杨永强，吴伟辉. 光纤激光选区激光熔化316L不锈钢工艺优化［J］. 中国激光， 2009， 36(12)：3233～3239
[11] E-Manufacturing Solutions. E-Manufacturing Applications[OL]. [2011-04-21]. http:∥www.eos.info/en/applications.html
[12] 何兴容，杨永强，吴伟辉 等. 粉碎性骨折个体化手术模板的选区激光熔化直接成型研究［J］. 生物医学工程学杂志， 2010， 27(3)： 519～523
He Xingrong, Yang Yongqiang, Wu Weihui et al.. Research on direct forming of comminuted fracture surgery orienting model by selective laser melting［J］. J. Biomedical Engineering, 2010, 27(3): 519～523
[13] E. Yasa, T. Craeghs, M. Badrossamay et al.. Rapid manufacturing research at the catholic university of leuven［C］. Istanbul: US Turkey Workshop on Rapid Technologies, 2009
[14] D. Olaf, S. Sarat, R. Stephen et al.. Tools for sustainable product design: additive manufacturing［J］. J. Sust. Dev., 2010, 3(3): 68～75
苏旭彬, 杨永强, 王迪, 陈永华. 免装配机构的选区激光熔化直接成型工艺研究[J]. 中国激光, 2011, 38(6): 0603021. Su Xubin, Yang Yongqiang, Wang Di, Chen Yonghua. Study on Process of Non-Assembly Mechanisms Directly Fabricated by Selective Laser Melting[J]. Chinese Journal of Lasers, 2011, 38(6): 0603021.
PDF全文
