[1] S. Jiang, L. Ma, S. Wang, X. Fan, Z. He. Mode-interference-induced oscillation in propagation speed of fiber fuse in few-mode fibers. Opt. Lett., 2018, 43: 4252.

[2] W. Shen, J. Du, L. Sun, C. Wang, Y. Zhu, K. Xu, B. Chen, Z. He. Low-latency and high-speed hollow-core fiber optical interconnection at 2-micron waveband. J. Lightwave Technol., 2020, 38: 3874.

[3] R. Essiambre, G. Kramer, P. J. Winzer, G. J. Foschini, B. Goebel. Capacity limits of optical fiber networks. J. Lightwave Technol., 2010, 28: 662.

[4] MaL.JiangS.DuJ.YangC.TongW.HeZ., “Ring-assisted 7-lp-mode fiber with ultralow inter mode crosstalk,” in Asia Communications and Photonics Conference 2016 (Optical Society of America, 2016), paper AS4A.5.

[5] Y. Liu, L. Ma, W. Xiao, R. Wang, J. Xiong, J. Luo, Z. He. Wide band multimode fiber with an optimized core size and fluorine-doped cladding for high-speed SWDM and CWDM transmission. Opt. Express, 2019, 27: 15433.

[6] S. Jiang, L. Ma, Z. Zhang, X. Xu, S. Wang, J. Du, C. Yang, W. Tong, Z. He. Design and characterization of ring-assisted few-mode fibers for weakly coupled mode-division multiplexing transmission. J. Lightwave Technol., 2018, 36: 5547.

[7] LiJ.DuJ.MaL.LiM.-J.HeZ., “Second-order few mode distributed Raman amplifier for mode-division multiplexing transmission,” in Optical Fiber Communication Conference (Optical Society of America, 2017), paper Th4A.3.

[8] G. Son, S. Han, J. Park, K. Kwon, K. Yu. High-efficiency broadband light coupling between optical fibers and photonic integrated circuits. Nanophotonics, 2018, 10: 1515.

[9] J. Li, C. Cai, J. Du, S. Jiang, L. Ma, L. Wang, L. Zhu, A. Wang, M. Li, H. Chen, J. Wang, Z. He. Ultra-low-noise mode-division multiplexed WDM transmission over 100-km FMF based on a second-order few-mode Raman amplifier. J. Lightwave Technol., 2018, 36: 3254.

[10] L. Jia, C. Li, T.-Y. Liow, G.-Q. Lo. Efficient suspended coupler with loss less than −1.4 dB between Si-photonic waveguide and cleaved single mode fiber. J. Lightwave Technol., 2018, 36: 239.

[11] R. Marchetti, C. Lacava, L. Carroll, K. Gradkowski, P. Minzioni. Coupling strategies for silicon photonics integrated chips. Photon. Res., 2019, 7: 201.

[12] D. Vermeulen, S. Selvaraja, P. Verheyen, G. Lepage, W. Bogaerts, P. Absil, D. V. Thourhout, G. Roelkens. High-efficiency fiber-to-chip grating couplers realized using an advanced CMOS-compatible silicon-on-insulator platform. Opt. Express, 2010, 18: 18278.

[13] T. Shoji, T. Tsuchizawa, T. Watanabe, K. Yamada, H. Morita. Low loss mode size converter from 0.3 µm square Si wire waveguides to single mode fibres. Electron. Lett., 2002, 38: 1669.

[14] F. Van Laere, G. Roelkens, M. Ayre. Compact and highly efficient grating couplers between optical fiber and nanophotonic waveguides. J. Lightwave Technol., 2007, 25: 151.

[15] H. Park, S. Kim, J. Park, J. Joo, G. Kim. A fiber-to-chip coupler based on Si/SiON cascaded tapers for Si photonic chips. Opt. Express, 2013, 21: 29313.

[16] A. Bozzola, L. Carroll, D. Gerace, I. Cristiani, L. C. Andreani. Optimising apodized grating couplers in a pure SOI platform to −0.5 dB coupling efficiency. Opt. Express, 2015, 23: 16289.

[17] T. G. Tiecke, K. P. Nayak, J. D. Thompson, T. Peyronel, N. P. de Leon, V. Vuletić, M. D. Lukin. Efficient fiber-optical interface for nanophotonic devices. Optica, 2015, 2: 70.

[18] A. Khilo, M. A. Popović, M. Araghchini, F. X. Kärtner. Efficient planar fiber-to-chip coupler based on two-stage adiabatic evolution. Opt. Express, 2010, 18: 15790.

[19] P. Li, J. Liu, P. Huang, X. Zhang, J. Shi, L. Yuan, C. Guan. Tunable fiber-tip lens based on thermo-optic effect of amorphous silicon. Chin. Opt. Lett., 2020, 18: 030602.

[20] X. Zhang, T. Yuan, X. Yang, C. Guan, J. Yang, Z. Liu, H. Deng, L. Yuan. In-fiber integrated optics: an emerging photonics integration technology [Invited]. Chin. Opt. Lett., 2018, 16: 110601.

[21] J. I. Yamada, Y. Murakami, J. I. Sakai. Characteristic of a hemispherical microlens for coupling between a semiconductor laser and single mode fiber. IEEE J. Quantum Electron, 1980, 16: 1067.

[22] F. P. Payne, C. D. Hussey, M. S. Hataki. Modelling fused single-mode fibre couplers. Electron. Lett., 1985, 21: 461.

[23] S.-M. Tseng, C.-L. Chen. Side-polished fibers. Appl. Opt., 1992, 31: 3438.

[24] V. K. S. Hsiao, Z. Li, Z. Chen, P. C. Peng, J. Tang. Optically controllable side-polished fiber attenuator with photo responsive liquid crystal over lay. Opt. Express, 2009, 17: 19988.

[25] H. Melkonyan, K. Sloyan, M. Odeh, I. Almansouri. Embedded parabolic fiber lens for efficient fiber-to-waveguide coupling fabricated by focused ion beam. J. Phys. Photon., 2019, 1: 025004.

[26] H. Melkonyan, K. Sloyan, K. Twayana, P. Moreira, M. Dahlem. Efficient fiber-to-waveguide edge coupling using an optical fiber axicon lens fabricated by focused ion beam. IEEE Photon. J., 2017, 9: 7104309.

[27] H. Melkonyan, K. Sloyan, M. Odeh, I. Almansouri. Gradient-index optical fiber lens for efficient fiber-to-chip coupling. Opt. Express, 2017, 25: 13035.

[28] P. A. R. Tafulo, P. A. S. Jorge, J. L. Santos, O. Frazão. Fabry–Pérot cavities based on chemical etching for high temperature and strain sensing. Opt. Commun., 2012, 285: 1159.

[29] C. J. Tuck, R. Hague, C. Doyle. Low cost optical fibre based Fabry–Perot strain sensor production. Meas. Sci. Technol., 2006, 17: 2206.

[30] Y. Gong, Y. J. Rao, Y. Guo, Z. L. Ran, Y. Wu. Temperature insensitive micro Fabry–Pérot strain sensor fabricated by chemically etching Er-doped fiber. IEEE Photon. Technol. Lett., 2009, 21: 1725.