热-机械耦合作用下黏结材料对变形镜应力特性的影响 下载: 721次
王家秋, 罗帅, 张彬. 热-机械耦合作用下黏结材料对变形镜应力特性的影响[J]. 激光与光电子学进展, 2018, 55(3): 030104.
Jiaqiu Wang, Shuai Luo, Bin Zhang. Influence of Adhesive Materials on Stress Characteristics of Deformable Mirrors Under Thermo-Mechanical Coupling[J]. Laser & Optoelectronics Progress, 2018, 55(3): 030104.
[1] 姜文汉. 自适应光学技术[J]. 自然杂志, 2006, 28(1): 7-13.
Jiang W H. Adaptive optical technology[J]. Chinese Journal of Nature, 2006, 28(1): 7-13.
[2] 赵丽娜, 戴云, 赵军磊, 等. 基于变形反射镜的光瞳滤波超分辨成像[J]. 激光与光电子学进展, 2017, 54(4): 041801.
[3] 林旭东, 刘欣悦, 王建立, 等. 基于压电陶瓷促动器的连续镜面变形镜研制进展[J]. 激光与光电子学进展, 2014, 51(9): 090003.
[4] 周虹. 双压电片变形反射镜研制与应用研究[D]. 北京: 中国科学院大学, 2013.
ZhouH. Research on bimorph deformable mirror and its application in adaptive optics[D]. Beijing: University of Chinese Academy of Sciences, 2013.
[5] 范志刚, 常虹, 陈守谦. 透镜无热装配中粘结层的设计[J]. 光学精密工程, 2011, 19(11): 2573-2581.
[6] 封斐, 魏斌斌, 刘文广, 等. 强激光辐照对变形镜补偿能力影响的实验研究[J]. 激光与光电子学进展, 2016, 53(12): 120101.
[7] 胡小川, 彭家琪, 张彬. 变形镜热形变及其对光束质量的影响分析[J]. 中国激光, 2015, 42(1): 0102003.
Hu X C, Peng J Q, Zhang B. Thermal distortion of deformable mirror and its influence on beam quality[J]. Chinese Journal of Laser, 2015, 42(1): 0102003.
[8] 胡小川, 王度, 陈丽霞, 等. 基于变形镜热形变预估模型的自校正效果分析[J]. 中国激光, 2015, 42(12): 1202001.
[10] 程刚, 蒋世磊, 陈华强. 环氧树脂胶在光学部件粘接上的应用[J]. 中国胶粘剂, 2004, 13(4): 1-4.
Cheng G, Jiang S L, Chen H Q. Application of epoxy resin adhesive in optical instruments[J]. Chinese Adhesives, 2004, 13(4): 1-4.
[11] 杨春梅, 郑小玲, 余海洲. 环氧胶粘涂层中温度应力的有限元分析[J]. 三峡大学学报(自然科学版), 2004, 26(2): 160-162.
Yang C M, Zheng X L, Yu H Z. Finite element analysis of inner stress in epoxy adhesive layer[J]. Journal of China Three Gorges University (Natural Sciences), 2004, 26(2): 160-162.
[13] 侯瑞祥. 光学仪器胶粘剂应用现状及进展[J]. 光学技术, 1997( 1): 49- 55.
Hou RX. Application and development of optics adhesive used in optical instruments[J]. Optical Technology, 1997( 1): 49- 55.
[14] 刘强, 何欣. 反射镜用光学环氧胶粘接固化工艺研究[J]. 机械设计与制造, 2011( 2): 118- 120.
LiuQ, HeX. Investigation on solidification technics of pastern in space mirror[J]. Machinery Design & Manufacture, 2011( 2): 118- 120.
[15] 饶学军, 凌宁, 姜文汉. 用数字干涉仪测量变形镜影响函数的实验研究[J]. 光学学报, 1995, 15(10): 1446-1451.
[16] Harvey JE, Callahan GM. Wavefront error compensation capabilities of multi-actuator deformable mirrors[C]. SPIE, 1978, 0141: 50- 58.
[17] 马雪梅. DF化学激光器的本征模式特性及自适应校正效果预估[D]. 成都: 四川大学, 2014.
Ma XM. Eigenmode characteristics of DF chemical laser and its adaptive wavefront correction effect prediction[D]. Chengdu: Sichuan University, 2014.
[18] 阎彬. 结构-热耦合问题及结构疲劳的可靠性分析方法研究[D]. 西安: 西安电子科技大学, 2013.
YanB. Research on reliability analysis methods of structural-thermal coupling and structural fatigue[D]. Xi'an:Xidian University, 2013.
[19] 王洪纲. 热弹性力学概论[M]. 北京: 清华大学出版社, 1989.
Wang HG. Introduction to thermoelastic mechanics[M]. Beijing: Tsinghua University Press, 1989.
[20] 刘鸿文. 材料力学[M]. 北京: 高等教育出版社, 1992.
Liu HW. Mechanics of material[M]. Beijing: Higher Education Press, 1992.
[21] 白春玉, 齐丕骞, 牟让科, 等. 基于经典Von Mises应力的多轴等效应力修正方法研究[J]. 振动与冲击, 2015, 34(23): 166-170.
Bai C Y, Qi P Q, Mou R K, et al. Multiaxial equivalent stress amendment algorithm based on classical Von Mises stress[J]. Journal of Vibration and Shock, 2015, 34(23): 166-170.
[22] 益小苏. 复合材料手册[M]. 北京: 化学工业出版社, 2009.
Yi XS. Composite materials handbook[M]. Beijing: Chemical Industry Press, 2009.
[23] 孔凡荣, 游敏, 郑小玲, 等. 胶粘剂特性和厚度对劈裂载荷作用下胶接接头应力分布的影响[J]. 弹性体, 2004, 14(4): 41-45.
Kong F R, You M, Zheng X L, et al. Influence of elastic modulus and thickness of adhesive on stress distribution of adhesive bonded joints under cleavage loading[J]. China Elastomerics, 2004, 14(4): 41-45.
[24] 张殷华. 中红外光学薄膜机械性能研究[D]. 成都: 中国科学院光电技术研究所, 2006.
Zhang YH. Study on mechanical property for mid-infrared optical thin film[D]. Chengdu: Institute of Optics and Electronics,Chinese Academy of Sciences, 2006.
[25] 若木守明. 光学材料手册[M]. 周海宪, 程云芳, 译. 北京: 化学工业出版社, 2010.
WakakiM. Handbook of optical materials[M]. Zhou H X, Cheng Y F, Transl. Beijing: Chemical Industry Press, 2010.
[26] Chen LX. Study on fatigue damage characteristics of the optical deformable mirrors[D]. Chengdu: Sichuan University, 2017.
[27] 陈丽霞, 胡小川, 韩开, 等. Zernike 多项式对空间高频相位拟合的改进方法[J]. 光学学报, 2016, 36(3): 0314001.
[28] Tyson RK, Byrne DM. The effect of wavefront sensor characteristics and spatiotemporal coupling on the correcting capability of a deformable mirror[C]. Proceedings of the Society of Photo-Optical Instrumentation Engineers, 1980: 228.
[30] 郑瑞琪. 胶层厚度对胶接性能的影响[J]. 粘接, 1990, 11(4): 33-35.
Zheng R Q. Effect of adhesive layer thickness on adhesive properties[J]. Adhesion, 1990, 11(4): 33-35.
王家秋, 罗帅, 张彬. 热-机械耦合作用下黏结材料对变形镜应力特性的影响[J]. 激光与光电子学进展, 2018, 55(3): 030104. Jiaqiu Wang, Shuai Luo, Bin Zhang. Influence of Adhesive Materials on Stress Characteristics of Deformable Mirrors Under Thermo-Mechanical Coupling[J]. Laser & Optoelectronics Progress, 2018, 55(3): 030104.