7075铝合金纳秒激光微孔加工研究
陶俊, 张文武, 李德鑫, 安超, 昝少平. 7075铝合金纳秒激光微孔加工研究[J]. 应用激光, 2017, 37(1): 105.
Tao Jun, Zhang Wenwu, Li Dexin, An Chao, Zan Shaopin. Investigation on Microhole Processing for Nano-pulsed Laser of Aluminum Alloy 7075[J]. APPLIED LASER, 2017, 37(1): 105.
[1] 李向东, 王伟.提高激光打孔加工质量的途径［J］.航空工程与维修, 2000(4): 44-45.
LI XIANGDONG, WANG WEI.Gateway of advancing process quality for drilling by laser［J］.Aviation engineering &maintenance, 2000(4): 44-45.
[2] VON ALLMEN M.Laser-beam interactions with materials: physical principles and applications［M］.Springer: Verlag, 1987.
[3] 雄厚.纳秒激光薄铝板精密打孔研究［D］.武汉: 湖北工业大学, 2016.
XIONG HOU.Nanosecond laser drilling of thin aluminum sheets［D］.Wuhan: Hubei University of Technology, 2016.
[4] STEENW M, JYOTIRMOY MAZUMDER.Laser material processing［M］.Springer: Verlag, 2010.
[5] CORCORAN A, SEXTON L, SEAMAN B, et al.The laser drilling of multi-layer aerospace material systems［J］.Journal of Materials Processing Technology, 2002, 123(1): 100-106.
[6] LOW D K Y, LI L, BYRD P J.Hydrodynamic physical modeling of laser drilling［J］.Journal of Manufacturing Science & Engineering, 2002, 124(4): 852-862.
[7] 郭文渊, 王茂才, 张晓兵.镍基超合金激光打孔再铸层及其控制研究进展［J］.激光杂志, 2003, 24(4): 1-3.
[8] TU J, PALEOCRASSAS A G, REEVES N, et al.Experimental characterization of a micro-hole drilling process with short micro-second pulses by a CW single-mode fiber laser［J］.Optics & Lasers in Engineering, 2014, 55(55): 275-283.
[9] KIKIN P Y, PCHELINTSEV A I, RUSIN E E.Features of the hole shape formation during laser drilling of an ultrafine-grained aluminum alloy［J］.Technical Physics Letters, 2007, 33(11): 917-918.
[10] KIKIN P Y, PEREVEZENTSEV V N, PCHELINTSEV A I, et al.Effect of ultrafine-grained structure on the regime of laser drilling in aluminum alloy 1420［J］.Technical Physics Letters, 2006, 32(10): 845-846.
[11] 任乃飞, 夏凯波, 王后孝.5052铝合金板材脉冲激光打孔成形规律的研究［J］.激光与光电子学进展, 2015(12): 111-115.
REN NAIFEI, XIA KAIBO, WANG HOUXIAO.Investigation on Microhole formation characteristics for pulsed laser drilling of aluminum alloy 5052 sheets［J］.Laser & Optoelectronics Process, 2015(12): 111-115.
[12] 王占辉.7075铝合金电火花加工电参数优化研究［D］.天津: 天津职业技术师范大学, 2015.
WANG ZHANHUI.Research on optimization of electrical parameters of EDM maching 7075 aluminum alloy［D］.Tianjin : Tianjin University of Technology and Education, 2015.
陶俊, 张文武, 李德鑫, 安超, 昝少平. 7075铝合金纳秒激光微孔加工研究[J]. 应用激光, 2017, 37(1): 105. Tao Jun, Zhang Wenwu, Li Dexin, An Chao, Zan Shaopin. Investigation on Microhole Processing for Nano-pulsed Laser of Aluminum Alloy 7075[J]. APPLIED LASER, 2017, 37(1): 105.
PDF全文
