[1] P Y Bely. The Design and Construction of Large Optical Telescopes [M]. New York: Springer Press, 2002. 356-358.

[2] R Racine, D Salmon, D Cowley, et al.. Mirror, dome, and natural seeing at CFHT [J]. Astronomical Society of the Pacific, 1991, 103(667): 1020-1032.

[3] P R Wood, S G Ryan. Effects on seeing at the Anglo-Australian telescope of temperature differences between outside air, dome air and mirror [J]. Proceedings of the Astronomical Society of Australia, 1995, 12(1): 95-96.

[4] Zago Lorenzo. The Effects of the Local Atmospheric Environment on Astronomical Observations [D]. Switzerland: Swiss Federal Institute of Technology, 1995.

[5] Zago Lorenzo. An engineering handbook for local and dome seeing [C]. SPIE, 1997, 2871: 726.

[6] M T Bridgeland, C R Jenkins. Measurement of mirror seeing in the laboratory and at the telescope [J]. Mon Not R Astron Soc, 1997, 287(1): 87-109.

[7] 张俊, 鲜浩, 贺元兴, 等. 望远镜主镜温度场理论计算及主镜视宁度分析[J]. 光学学报, 2012, 32(10): 1022001.

    Zhang Jun, Xian Hao, He Yuanxing, et al.. Theoretical calculation of telescope primary mirror′s thermal field and primary mirror seeing analysis [J]. Acta Optoca Sinica, 2012, 32(10): p1022001.

[8] 郝允祥, 陈培生, 周克平. 红外天文学导论[M]. 北京: 北京大学出版社, 1993. 66.

    Hao Yunxiang, Chen Peisheng, Zhou Keping. Infrared Astronomy Introduction [M]. Beijing: Peking University Press, 1993. 66.

[9] 杨世铭, 陶文铨. 传热学[M]. 北京: 高等教育出版社, 2006. 41-45.

    Yang Shiming, Tao Wenquan. Heat Transfer. [M]. Beijing: Higher Education Press, 2006. 41-45.

[10] 魏在福, 查鸿逵, 王润文. 激光加热温度场物理分析[J]. 光学学报, 1994, 14(4): 355-359.

    Wei Zaifu, Cha Hongkui, Wang Runwen. Physical analysis of the laser-induced temperature field [J]. Acta Optica Sinica, 1994, 14(4): 355-359.

[11] 赵强, 范正修. 光学薄膜界面吸收对温度场的影响[J]. 光学学报, 1996, 16(6): 777-782.

    Zhao Qiang, Fan Zhengxiu. Interface absorption effect on temperature field of optical coatings [J]. Acta Optica Sinica, 1996, 16(6): 777-782.

[12] 王翔, 崔瑞, 杨浩. 工程塑料粉末激光烧结三维温度场的理论和实验研究[J]. 中国激光, 2011, 38(1): 01030005.

    Wang Xiang, Cui Rui, Yang Hao. Theoretical and experimental studies on three dimensional temperature field of selective laser sintering of engineering plastics powder [J]. Chinese J Lasers, 2011, 38(1): 01030005.

[13] 陆培华, 王润文. 高功率激光器窗口三维温度场分析及其热透镜研究[J]. 光学学报, 2001, 21(8): 965-969.

    Lu Peihua, Wang Runwen. Three-dimensional temperature distribution analysis and thermal lens effect calculation for high power laser windows [J]. Acta Optica Sinica, 2001, 21(8): 965-969.

[14] F M Gttsche, F S Olesen. Modelling of diurnal cycles of brightness temperature extracted from METEOSAT data [J]. Remote Sensing of Environment, 2001, 76(2001): 337-348.

[15] 贾力, 方肇洪. 高等传热学[M]. 北京: 高等教育出版社, 2008. 74-78.

    Jia Li, Fang Zhaohong. Advanced Heat Transfer [M]. Beijing: Higher Education Press, 2008. 74-78.

[16] 连天虹, 王石语, 过振, 等. 粗糙热传导表面下激光介质温度场的计算分析[J]. 光学学报, 2012, 32(6): 0614001.

    Lian Tianhong, Wang Shiyu, Guo Zhen, et al.. Temperature field analysis of laser medium with rough surface heat conduction [J]. Acta Optica Sinica, 2012, 32(6): 0614001.

[17] 杨力, 方敬忠, 等. 先进光学制造技术[M]. 北京: 科学出版社, 2001. 196-197.

    Yang Li, Fang Jinzhong, et al.. Advanced Optical Manufacture Technique [M]. Beijing: Science Press, 2001. 196-197.

[18] 王艳茹. 光学元件吸收损耗和热变形检测技术研究[D]. 北京: 中国科学院研究生院, 2011.

    Wang Yanru. Study on Optical Testing Methods for Weak Absorptance and Thermal Deformation of Optical Components [D]. Beijing: Graduate University of Chinese Academy of Sciences, 2011.

[19] 程景全. 天文望远镜原理和设计[M]. 北京: 中国科学技术出版社, 2003. 61-70.

    Cheng Jingquan. Theory and Design of Astronomical Telescope [M]. Beijing: Chinese Science and Technolog Press, 2003. 61-70.