[1] Ferguson B, Zhang X C. Materials for terahertz science and technology[J]. Nature Materials, 2002, 1(1): 26-33.
[2] Lee YS.
Principles of terahertz science and technology[M].
Boston, MA: Springer,
2009:
1-
3.
[3] 许景周,
张希成.
太赫兹科学技术和应用[M].
北京:
北京大学出版社,
2007:
1-
4.
Xu JZ,
Zhang XC.
Terahertz science and technology and applications[M].
Beijing:
Peking University Press,
2007:
1-
4.
[4] 李铁军, 孙跃, 邵桂芳, 等. 陶瓷基复合材料的太赫兹无损检测方法[J]. 激光与光电子学进展, 2018, 55(6): 061101.
Li T J, Sun Y, Shao G F, et al. Terahertz nondestructive detection method of ceramic matrix composites[J]. Laser & Optoelectronics Progress, 2018, 55(6): 061101.
[5] Cunningham P D, Valdes N N, Vallejo F A, et al. Broadband terahertz characterization of the refractive index and absorption of some important polymeric and organic electro-optic materials[J]. Journal of Applied Physics, 2011, 109(4): 043505.
[6] 张涵祎, 王可嘉, 张玉立, 等. 基于三维打印技术的太赫兹波段的柱透镜[J]. 激光与光电子学进展, 2018, 55(1): 011414.
Zhang H Y, Wang K J, Zhang Y L, et al. Terahertz cylindrical lenses based on three-dimensional printing technique[J]. Laser & Optoelectronics Progress, 2018, 55(1): 011414.
[7] Squires A D, Lewis R A. Feasibility and characterization of common and exotic filaments for use in 3D printed terahertz devices[J]. Journal of Infrared, Millimeter, and Terahertz Waves, 2018, 39(7): 614-635.
[8] Kodama H. Automatic method for fabricating a three-dimensional plastic model with photo-hardening polymer[J]. Review of Scientific Instruments, 1981, 52(11): 1770-1773.
[9] Sachs E, Cima M, Williams P, et al. Three dimensional printing: rapid tooling and prototypes directly from a CAD model[J]. Journal of Engineering for Industry, 1992, 114(4): 481-488.
[10] 张敏, 刘畅, 任博, 等. 3D 打印激光制备多孔镍合金组织和力学性能研究[J]. 中国光学, 2016, 9(3): 335-341.
Zhang M, Liu C, Ren B, et al. Microstructure and mechanical properties of porous Ni alloy fabricated by laser 3D printing[J]. Chinese Optics, 2016, 9(3): 335-341.
[11] 崔可建,
朱才镇,
轩钦,
等.
3D打印用光敏树脂的高性能化及功能化研究进展[J]. 高分子通报,
2017(
12):
28-
38.
Cui KJ,
Zhu CZ,
XuanQ, et al.
Research developments on high performance and functional photosensitive resin for 3D printing[J]. Chinese Polymer Bulletin,
2017(
12):
28-
38.
[12] Cruz A, Cordeiro C, Franco M. 3D printed hollow-core terahertz fibers[J]. Fibers, 2018, 6(3): 43.
[13] Gospodaric J, Kuzmenko A, Pimenov A, et al. 3D-printed phase waveplates for THz beam shaping[J]. Applied Physics Letters, 2018, 112(22): 221104.
[14] Zhang Z Q, Wei X L, Liu C M, et al. Rapid fabrication of terahertz lens via three-dimensional printing technology[J]. Chinese Optics Letters, 2015, 13(2): 022201.
[15] Stratasys[OL]. [2018-02-10].http:∥www.stratasys.com.cn.
[16] Wei X L, Liu C M, Niu L T, et al. Generation of arbitrary order Bessel beams via 3D printed axicons at the terahertz frequency range[J]. Applied Optics, 2015, 54(36): 10641-10649.
[17] 陈双, 吴甲民, 史玉升. 3D打印材料及其应用概述[J]. 物理, 2018, 47(11): 715-724.
Chen S, Wu J M, Shi Y S. General introduction of 3D printing materials and their applications[J]. Physics, 2018, 47(11): 715-724.
[18] Schall M, Jepsen P U. Freeze-out of difference-phonon modes in ZnTe and its application in detection of THz pulses[J]. Applied Physics Letters, 2000, 77(18): 2801-2803.
[19] 孙红起.
太赫兹时域光谱系统的性能研究[D].
北京: 首都师范大学,
2007.
Sun HQ.
Study on the performance of terahertz time domain spectroscopy system[D].
Beijing: Capital Normal University,
2007.
[20] Cai Y, Brener I, Lopata J, et al. Coherent terahertz radiation detection: direct comparison between free-space electro-optic sampling and antenna detection[J]. Applied Physics Letters, 1998, 73(4): 444-446.
[21] van Exter M, Fattinger C, Grischkowsky D. Terahertz time-domain spectroscopy of water vapor[J]. Optics Letters, 1989, 14(20): 1128-1130.
[22] 李进, 刘泉澄, 熊亮. 水蒸气中太赫兹波0.6 m行程下的传输特性[J]. 激光与光电子学进展, 2018, 55(9): 090101.
Li J, Liu Q C, Xiong L. Transmission characteristics of terahertz wave in water vapor transmitted 0.6 m[J]. Laser & Optoelectronics Progress, 2018, 55(9): 090101.
[23] 田发.
基于碲化锌晶体光学整流及电光采样的太赫兹时域光谱系统[D].
苏州: 苏州大学,
2015.
TianF.
THz time domain spectroscopy based on optical rectification and electro-optical sampling by ZnTe[D].
Suzhou: Soochow University,
2015.
[24] Mohou[OL]. [2018-02-10].http:∥www.mohou.com/.
[25] Wong K V, Hernandez A. A review of additive manufacturing[J]. ISRN Mechanical Engineering, 2012, 2012: 208760.
[26] Duvillaret L, Garet F, Coutaz J L. A reliable method for extraction of material parameters in terahertz time-domain spectroscopy[J]. IEEE Journal of Selected Topics in Quantum Electronics, 1996, 2(3): 739-746.