[1] A. C.Eralndson,M. D.Rotter,D. N.Frank, and R. W.McCracken, LLNL ICF Quarterly Report, 1 (1994).

[2] C.Marshall,A.Erlandson,J.Horvath,K.Jancaitis,D.Larson,J.Larson,K.Manes,E.Moor,S.Payne,L.Pedrotti,M.Rotter,S.Sutton,L.Zapata,J.Beullier,E.Grebot,J.Guenet,M.Guenet,G.Letouze,X.Maille,T.Mengue, and S.Sezhec, LLNL ICF Quarterly Report (1999).

[3] N.Fleurot,C.Cavailler, and J. L.Bourgade,Fusion Eng. Des.74, 147 (2005).

[4] Y.Zheng,J.Zhu,L.Qian,M.Zhang, and D.Fan,Chin. J. Lasers23, 289 (1996).

[5] W.Zheng,X.Zhang,X.Wei,F.Jing,Z.Sui,K.Zheng,X.Yuan,X.Jiang,J.Su,H.Zhou,M.Li,J.Wang,D.Hu,S.He,Y.Xiang,Z.Peng,B.Feng,L.Guo,X.Li,Q.Zhu,H.Yu,Y.You,D.Fan, and W.Zhang, in The Fifth International Conference on Inertial Fusion Sciences and Applications (Academic, Kobe, IOP, Japan, 2007), p. 1.

[6] L.Hu,S.Chen,J.Tang,B.Wang,T.Meng,W.Chen,L.Wen,J.Hu,S.Li,Y.Xu,Y.Jiang,J.Zhang, and Z.Jiang,High Power Laser Sci. Eng.2, e1 (2014).

[7] J. B.Trenholme, NRL Memorandum Report, 2480, 1 (1972).

[8] J.Hu, Researches on Several Key Engineering Problems of Edge Cladding Technology for Large Aperture Nd:Glass, PhD. Thesis (SIOM, 2015).

[9] J.Hu,T.Meng,H.Chen,L.Wen,J.Tang,C.Wang,Y.Lin,S.Chen,W.Chen, and L.Hu,Chin. Opt. Lett.12, 101401 (2014).

[10] Y.Asahara and T.Izumitini, US Patent 3,885,974 (May 27, 1975).

[11] S.Guch, Jr.,Appl. Opt.15, 1453 (1976).

[12] J. H.Campbell,G.Edwards,F. A.Frick,D. S.Gemmell,B. M.Gim,K. S.Jancaitis,E. S.Jessop,M. K.Kong,R. E.Lyon,J. E.Murry,H. C.Patton,J. H.Pitts,H. T.Powell,M. O.Riley,E. P.Wallerstein,C. R.Wolfe, and B. W.Woods, in The Eighteenth Annual Symposium on Optical Materials for High Power Lasers (Academic, Boulder, CO, 1986), p. 19.

[13] L. E.Zapata, US Patent, 5,335,237, (August 2, 1994).

[14] K.Xiao, Control and detection of subsurface damage of optical components during optical fabrication process, Master Thesis (SIOM, 2012).

[15] P. P.Hed,D. F.Edwards, and J. B.Davis,Lawrence Livermore National Laboratory (LLNL) Report, UCRL-995481 (1989).

[16] F.Tong, Near-surface mechanical properties of optical materials in deterministic microgrinding, PhD. Thesis, (University of Rochester, Rochester, 1997).

[17] M.Trost,T.Herffurth,D.Schmitz,S.Schröder,A.Duparré, and A.Tünnermann,Appl. Opt.52, 6579 (2013).

[18] J. M.Zhang,J. G.Sun, and Z. J.Pei, in NAMRC (Academic, West Lafayette, IN, 2002), p. 1.

[19] C. F.Bohren and D. R.Huffman,Absorption and Scattering of Light by Small Particles (Wiley VCH, 1988).

[20] N.Bloembergen,Appl. Opt.12, 661 (1973).

[21] F. Y.Génin,A.Salleo,T. V.Pistor, and L. L.Chase,J. Opt. Soc. Am.18, 2607 (2001).

[22] L.Zhang,W.Chen, and L.Hu,Appl. Opt.52, 980 (2013).

[23] A.Tian,H.Wang, and C.Wang,Chin. J. Lasers40, 0908006 (2013).

[24] F. W.Preston and B. Sc.Amice,Optical141 (1921).

[25] L.Zhang, FDTD analysis of surface defects related to laser-induced damage on optical glass surfaces, PhD. Thesis (SIOM, 2012).

[26] Z.Lei,H.Li,C.Wei, and H.Lili,High Power Laser Part. Beams23, 381 (2011).

[27] B. E.Gillman and S. D.Jacobs,Appl. Opt.37, 3498 (1998).

[28] J. C.Lambropoulos,S. D.Jacobs,B. E.Gillman,F.Yang, and J.Ruckman, in Laboratory for Laser Energetics, Review 73, DOEySFy19460-212 (University of Rochester, Rochester, NY), pp. 45–49.

[29] B.Wang,J.Zhang,L.Wang,Q.Liu, and J.Zhu,Acta Opt. Sin.36, 0214003 (2016).