硼钢镀层对热成形激光拼焊板组织及性能的影响
陈晓莞, 李芳, 林文虎, 金鑫, 华学明. 硼钢镀层对热成形激光拼焊板组织及性能的影响[J]. 中国激光, 2017, 44(4): 0402011.
Chen Xiaoguan, Li Fang, Lin Wenhu, Jin Xin, Hua Xueming. Effect of Boron Steel Coating on Microstructure and Property of Laser Tailor-Welded Blanks After Hot Stamping[J]. Chinese Journal of Lasers, 2017, 44(4): 0402011.
[1] Karbasian H, Tekkaya A E. A review on hot stamping[J]. Journal of Materials Processing Technology, 2010, 210(15): 2103-2118.
[2] Merklein M, Lechler J, Geiger M. Characterisation of the flow properties of the quenchenable ultra high strength steel 22MnB5[J]. CIRP Annals-Manufacturing Technology, 2006, 55(1): 229-232.
[3] Kang M, Kim C, Bae S M. Laser tailor-welded blanks for hot-press-forming steel with arc pretreatment[J]. International Journal of Automotive Technology, 2015, 16(2): 279-283.
[4] 刘国承, 田杰平, 史玉升, 等. 汽车用钢焊接技术研究进展[J]. 激光与光电子学进展, 2015, 52(1): 010004.
[5] 魏 菁, 王 欢, 石少坚, 等. 10CrSiNiCu船用高强钢光纤激光焊接接头组织和性能[J]. 中国激光, 2016, 43(3): 0303003.
[6] Jia J, Yang S L, Ni W Y, et al. Microstructure and mechanical properties of fiber laser welded joints of ultrahigh-strength steel 22MnB5 and dual-phase steels[J]. Journal of Materials Research, 2014, 29(21): 2565-2575.
[7] 伍 强, 徐兰英, 杨永强, 等. 高强钢激光焊接残余应力的研究[J]. 中国激光, 2015, 42(6): 0603007.
[8] Kim C H, Choi J K, Kang M J, et al. A study on the CO2 laser welding characteristics of high strength steel up to 1500 MPa for automotive application[J]. Journal of Achievements in Materials and Manufacturing Engineering, 2010, 39(1): 79-86.
[9] 张 帆, 李 芳, 华学明, 等. Al-Si镀层在激光拼焊板焊缝中分布及性能影响研究[J]. 中国激光, 2015, 42(5): 0503005.
[10] Iordachescu D, Blasco M, Lopez R, et al. Recent achievements and trends in laser welding of thin plates[J]. Journal of Optoelectronics and Advanced Materials, 2011, 13(7-8): 981-985.
[11] Kim C, Kang M J, Park Y D. Laser welding of Al-Si coated hot stamping steel[J]. Procedia Engineering, 2011,10: 2226-2231.
[12] Lee M S, Moon J H, Kang C G. Investigation of formability and surface micro-crack in hot deep drawing by using laser-welded blank of Al-Si and Zn-coated boron steel[J]. Proceedings of the Institution of Mechanical Engineers Part B, 2014, 228(4): 540-552.
[13] Norman P, Wiklund G, Janiak P, et al. Comparison of 22MnB5-steel with and without AlSi-coating during laser hybrid arc welding[C]. Conference on Laser Materials Processing in the Nordic Countries, 2011, 13.
[14] Kang M, Kim C, Lee J. Weld strength of laser-welded hot-press-forming steel[J]. Journal of Laser Applications, 2012, 24(2): 022004.
[15] Davis C L, King J E. Cleavage initiation in the intercritically reheated coarse-grained heat-affected zone: Part I. Fractographic evidence[J]. Metallurgical and Materials Transactions A, 1994, 25(3): 563-573.
[16] Kang M, Kim Y M, Kim C. Effect of heating parameters on laser welded tailored blanks of hot press forming steel[J]. Journal of Materials Processing Technology, 2016, 228: 137-144.
陈晓莞, 李芳, 林文虎, 金鑫, 华学明. 硼钢镀层对热成形激光拼焊板组织及性能的影响[J]. 中国激光, 2017, 44(4): 0402011. Chen Xiaoguan, Li Fang, Lin Wenhu, Jin Xin, Hua Xueming. Effect of Boron Steel Coating on Microstructure and Property of Laser Tailor-Welded Blanks After Hot Stamping[J]. Chinese Journal of Lasers, 2017, 44(4): 0402011.