[1] 尹亚鹏, 李新, 郑小兵等. 场地自动化观测辐射计的设计与实现［J］. 大气与环境光学学报, 2016, 11(1): 44-50.

    YIN Ya-peng, LI Xin, ZHENG Xiao-bing, et al. Design and implemeng of automated site observing radiometer［J］. Journal of Atmospheric and Environmental Optics, 2016, 11(1): 44-50.

[2] 高海亮, 顾行发, 余涛等. 星载光学遥感器可见近红外通道辐射定标研究进展［J］. 遥感信息, 2010, 4: 117-128.

    GAO Hai-liang, GU Xing-fa, YU Tao, et al. The research overview on visible and near infrared channels radiometric calibration of space-borne optical remote sensors［J］. Remote Sensing Information, 2010, 4: 117-128.

[3] 董毅, 吕佳彦, 宋青涛等. 反射率基法辐射定标原理和流程介绍［J］. 科技创新与应用, 2016, 24: 71-72.

    DONG Yi, LV Jia-yan, SONG Qing-tao, et al. Reflectance radiation calibration principle and process introduction［J］. Innovation and Application of Science and Technology, 2016, 24: 71-72.

[4] 胡秀清, 张秀香, 邱康睦. 采用辐照度基法对FY-1C气象卫星可见近红外通道进行绝对辐射定标［J］. 遥感学报, 2003, 7(6): 458-464.

    HU Xiu-qing, ZHANG Xiu-xiang, QIU Kang-mu. In-flight radiometric calibration for VIR channels of FY-1C satellite sensor by using irradiance-based method［J］. Journal of Remote sensing, 2003, 7(6): 458-464.

[5] 李新, 郑小兵, 尹亚鹏. 场地自动化定标技术进展［J］. 大气与环境光学学报, 2014, 9(1): 17-21.

    LI Xin, ZHENG Xiao-bing, YIN Ya-peng. Progress inautomated site vicarious calibration technologies［J］. Journal of Atmospheric and Environmental Optics,2014, 9(1): 17-21.

[6] SCHMECHTG C, SANTER R P, ROGER J-C, et al. Automatic ground-based station for vicarious calibration［C］. SPIE, 1997, 3221: 309-317.

[7] KEROLA D X, BRUEGGE C J, GROSS H N, et al. On-orbit calibration of the EO-1 Hyperion and advanced land imager (ALI) sensors using the LED spectrometer (LSpec) automated facility［J］. IEEE Transactions on Geoscience and Remote Sensing, 2009, 47(4): 1244-1255.

[8] CZAPLA-MYERS J S, THOME K J, LESSO N P. Radiometric calibration of earth-observing sensors using an automated test site at Railroad Valley Nevada［J］. Canadian Journal of Remote Sensing, 2010, 36(5): 474-487.

[9] CZAPLA-MYERS J S. Automated ground-based methodology in support of vicarious calibration［D］. Tucson: The University of Arizona, 2006: 41-43,54-57.

[10] 邱刚刚, 李新, 韦玮等. 基于场地自动化观测技术的遥感器在轨辐射定标实验与分析［J］. 光学学报, 2016, 36(7): 0701001.

    QIU Gang-gang, LI Xin, WEI Wei, et al. Experiment and analysis of on-orbit radiometric calibration for remote sensors based on in-site automated observation technology［J］. Acta Optica Sinica, 2016, 36(7): 0701001.

[11] 李新, 郑小兵, 寻丽娜等. 室外高光谱BRDF自动测量系统的设计［J］. 光学技术, 2008, 34(2): 262-268.

    LI Xin, ZHENG Xiao-bing, XUN Li-na, et al. Design of automated field hyperspectral BRDF measurement system［J］. Optical Technique, 2008, 34(2): 262-268.

[12] SANDMEIER S T, MULLER C H, HOSGOOD B, et al. Sensitivity analysis and quality assessment of laboratory BRDF data［J］. Remote Sensing of Environment, 1998, 64: 176-191.

[13] DUGGIN M J, CUNIA T. Ground reflectance measurement techniques: a comparison［J］.Applied Optics, 1983, 22(23): 3771-3777.

[14] 李新, 郑小兵, 洪津, 等. 高光谱短波红外地物光谱仪光机设计［J］. 光学精密工程, 2007, 15(11): 1656-1661.

    LI Xin, ZHENG Xiao-bing, HONG Jin,et al. Optical and mechanical design of SWIR hyperspectral field spectroradiometer［J］. Optics and Precision Engineering, 2007, 15(11): 1656-1661.

[15] 张岩. ANSYS Workbench 15.0 有限元分析从入门到精通［M］. 北京: 机械工业出版社. 2014: 133-149.

[16] 汤传军, 张键, 李健等. 基于Workbench变速器齿轮轴的疲劳分析［J］. 汽车实用技术, 2014, 2: 1-4.

    TANG Chuan-jun, ZHANG Jian, LI Jian, et al. Fatigue analysis of transmission gear shaft based on workbench［J］. Automobile Applied Technology, 2014, 2: 1-4.

[17] 李丽, 乔延利, 顾行发,等. 基于缩微模型法的宽视场效应实验室验证方法的研究［J］. 遥感信息, 2013, 28(2): 70-75, 81.

    LI Li, QIAO Yan-li, GU Xing-fa, et al. A laboratory verification method of wide field vision effect based on miniature model［J］. Remote Sensing Information, 2013, 28(2): 70-75, 81.