[1] JIANG H Y. Materials and production techniques applied in engine connecting rod［J］. Internal Combustion Engine & Parts, 2013, 34(10): 23-26 (in Chinese).

[2] HUANG W D, LI Y M, FENG L P, et al. laser solid forming of metal powder materials［J］. Journal of Materials Engineering, 2002, 30(3): 40-43 (in Chinese).

[3] LI H Y, SHI Sh H, FU G Y, et al. Control of process parameters of reducing solid of revolution with coaxial inside-beam powder feeding accumulation［J］. Chinese Journal of Lasers, 2011, 38(8): 0803012 (in Chinese).

[4] CAI W, FU G Y, SHI Sh H, et al. Research on thickness control of variable diameter solid with coaxial inside-beam powder feeding laser cladding by defocusing technique［J］. Chinese Journal of Lasers, 2012, 39(7): 0703003 (in Chinese).

[5] WANG K, YANG H O, LIU F Ch, et al. Stress and deformation finite element method simulation of thin wall part with pre-deformation subtract during laser solid forming［J］. Chinese Journal of Lasers, 2012, 39(6): 0603002 (in Chinese).

[6] FANG Q Q, FU G Y, WANG C, et al. Laser direct forming technology of double thin-wallet parts with connecting ribs［J］. Chinese Journal of Lasers, 2017, 44(2): 0202005(in Chinese).

[7] SONG X H, ZHOU Y F, XING J K, et al. Comparison between laser cladding Fe-based and Ni-based alloy coatings on 35CrMo［J］. Laser Technology, 2015, 39(1): 39-45 (in Chinese).

[8] SHI B F, ZHANG A F, QI B L, et al. Influence of heat accumulation on microstructure and property of Ti-6Al-4V in laser direct forming［J］. Laser Technology, 2016, 40(1): 29-32 (in Chinese).

[9] ZHOU S, DAI X, ZHENG H. Microstructure and wear resistance of Fe-based WC coating by multi-track overlapping laser induction hybrid rapid cladding［J］. Optics & Laser Technology, 2012, 44(1): 190-197.

[10] CUI Z Q, YANG H W, WANG W X, et al. Laser cladding Al-Si/Al2O3-TiO2 composite coatings on AZ31B magnesium alloy［J］. Journal of Wuhan University of Technology(Materials Science Edition), 2012, 27(6): 1042-1047.

[11] CHEN J F, WANG J T, ZHOU J Y. Research process of laser cladding on magnesium alloy surface［J］. Laser Technology, 2015, 39(5): 631-636 (in Chinese).

[12] WANG H M. Materials’ fundamental issues of laser additive manufacturing for high-performance large metallic components［J］. Acta Aeronautica et Astronautica Sinica, 2014, 35(10): 2690-2698 (in Chinese).

[13] LU Z L, LI D C, LU B H, et al. Investigation into the direct laser forming process of steam turbine blade［J］. Optics and Laser in Engineering, 2011, 49(9/10): 1101-1110.

[14] LIU S Q, GUO Y Sh, YANG Y L, et al. Investigation on orthogonal experiments of laser cladding anti-wear resistance coating on H13 steel［J］. Laser Technology, 2015, 39(3): 399-404 (in Chinese).

[15] GAO J, SONG D Y, FENG J W. Influence of processing parameters on geometrical features of CBN coatings by laser cladding on titanium alloy surface［J］. Surface Technology, 2015, 44(1): 77-80 (in Chinese).

[16] CHEN L, TAO R, LOU D Y, et al. Analysis of the mechanism cracking during the multipass laps cladding experiment[J].Laser & Optoelectronics Progress, 2014, 51(10): 101401 (in Chinese).

[17] XIE J X. New technique and new technology of material processing［M］. Beijing: Metallurgical Industry Press, 2004: 16-20 (in Chinese).

[18] ZHU X M. Study of development and application of high-apeed cutting tool materials［J］. Machinery Design & Manufacture, 2012, 50(11): 244-245 (in Chinese).

[19] WANG Zh H, LI Sh, GE Y, et al. Research on micstructure and mechanical properties and fracture splitting properties of forged connecting rod of C70S6 non-quenched and tempered steel［J］. Hot Working Technology, 2015, 44(19): 39-43 (in Chinese).

[20] ILIA E, LANNI G, XIN J, et al. Investigation on high strength powder metal forged connecting rods［J］. Transactions of CSICE, 2008, 26(5): 463-469 (in Chinese).

[21] BAI L N, LIU F P, WANG S, et al. Micstructure and mechanical properties of Fe-C-Cu powder-forged connecting rod［J］. Acta Metallurgica Sinica, 2016, 52(1): 41-50 (in Chinese).