[1] Cano-Contreras M. Guzman-Chavez A D, Mata-Chavez R I, et al. All-fiber curvature sensor based on an abrupt tapered fiber and a Fabry-Pérot interferometer[J]. IEEE Photonics Technology Letters, 2014, 26(22): 2213-2216.

[2] Dong S D, Dong B, Yu C Y, et al. High sensitivity optical fiber curvature sensor based on cascaded fiber interferometer[J]. Journal of Lightwave Technology, 2018, 36(4): 1125-1130.

[3] Wang T T, Li Z P, Shen J. A design of optic fiber pressure sensor based on micro in-fiber ellipsoidal cavity[J]. Semiconductor Optoelectronics, 2017, 38(6): 789-805.

[4] Tang J, Yin G L, Liu S, et al. Gas pressure sensor based on CO2-laser-induced long-period fiber grating in air-core photonic bandgap fiber[J]. IEEE Photonics Journal, 2015, 7(5): 1-7.

[5] 张珊, 黄战华, 李桂芳, 等. 温度不敏感的少模光纤应变传感[J]. 中国激光, 2017, 44(2): 0120002.

    Zhang S, Huang Z H, Li G F, et al. Temperature-insensitive strain sensing based on few mode fiber[J]. Chinese Journal of Lasers, 2017, 44(2): 0120002.

[6] Qian Z H, Gong H P, Yang X, et al. Optical fiber temperature sensor based on modal interferometer comprising two peanut-shape structures[J]. Microwave and Optical Technology Letters, 2015, 57(12): 2841-2844.

[7] Kumar A, Jindal R, Varshney R K, et al. A fiber-optic temperature sensor based on LP01-LP02 mode interference[J]. Optical Fiber Technology, 2000, 6(1): 83-90.

[8] Lu H L, Yue Y L, Du J, et al. Temperature and liquid refractive index sensor using P-D fiber structure-based Sagnac loop[J]. Optics Express, 2018, 26(15): 18920-18927.

[9] An G W, Hao X P, Li S G, et al. D-shaped photonic crystal fiber refractive index sensor based on surface plasmon resonance[J]. Applied Optics, 2017, 56(24): 6988-6992.

[10] 孙浩, 忽满利, 乔学光, 等. 基于纤芯失配多模干涉的光纤折射率传感器[J]. 中国激光, 2012, 39(2): 0205001.

    Sun H, Hu M L, Qiao X G, et al. Fiber refractive index sensor based on fiber core mismatch multimode interference[J]. Chinese Journal of Lasers, 2012, 39(2): 0205001.

[11] 钱春霖, 陈明阳. 基于多模干涉效应的光纤折射率传感技术研究[J]. 激光与光电子学进展, 2016, 53(5): 050601.

    Qian C L, Chen M Y. Investigation on refractive index sensing based on interference effect in multimode optical fiber[J]. Laser & Optoelectronics Progress, 2016, 53(5): 050601.

[12] 王旗, 邹辉, 韦玮. 基于偏芯熔接光纤的应力与折射率传感器[J]. 光学学报, 2017, 37(10): 1006005.

    Wang Q, Zou H, Wei W. Strain and refractive index sensor based on core-offset splicing fibers[J]. Acta Optica Sinica, 2017, 37(10): 1006005.

[13] Dong Y, Xiao S Y, Xiao H, et al. An optical liquid-level sensor based on D-shape fiber modal interferometer[J]. IEEE Photonics Technology Letters, 2017, 29(13): 1067-1070.

[14] . 8351: 8351OT[J]. Tong B. Double-fiber Fabry-Perot interferometry optical fiber liquid level sensor. Proceedings of SPIE, 2012.

[15] 邵敏, 韩亮, 兆雪, 等. 基于在线型光纤迈克耳孙干涉仪的液位传感器[J]. 光学学报, 2018, 38(3): 0328021.

    Shao M, Han L, Zhao X, et al. Liquid level sensor based on in-fiber Michelson interferometer[J]. Acta Optica Sinica, 2018, 38(3): 0328021.

[16] Guzman-Sepulveda JR, Hernandez-RomanoI, Torres-CisnerosM, et al. Fiber optic vibration sensor based on multimode interference effects[C]∥2012 Conference on Lasers and Electro-Optics, May 6-11, 2012, San Jose, California United States. Washington: Optical Society of America, 2012: JW2A. 117.

[17] Ran Y L, Xia L, Han Y, et al. Vibration fiber sensors based on SM-NC-SM fiber structure[J]. IEEE Photonics Journal, 2015, 7(2): 14979341.

[18] 王红日, 高仁喜, 殷焱煊, 等. 基于单模-多模光纤悬臂梁型振动传感器的研究[J]. 激光与光电子学进展, 2016, 53(6): 060601.

    Wang H R, Gao R X, Yin Y X, et al. Vibration sensor based on single mode-multimode optic-fiber cantilever structure[J]. Laser & Optoelectronics Progress, 2016, 53(6): 060601.

[19] Yan S Z, Chyan L S. Performance enhancement of BOTDR fiber optic sensor for oil and gas pipeline monitoring[J]. Optical Fiber Technology, 2010, 16(2): 100-109.

[20] Bernini R, Minardo A, Zeni L. Vectorial dislocation monitoring of pipelines by use of Brillouin-based fiber-optics sensors[J]. Smart Materials and Structures, 2008, 17(1): 015006.

[21] Fu G W, Li Y P, Fu X H, et al. Temperature insensitive curvature sensor based on cascading photonic crystal fiber[J]. Optical Fiber Technology, 2018, 41: 64-68.

[22] Gong Y, Zhao T, Rao Y J, et al. All-fiber curvature sensor based on multimode interference[J]. IEEE Photonics Technology Letters, 2011, 23(11): 679-681.

[23] 孙明明, 王剑锋, 金永兴, 等. 基于错位和花生形结构的全光纤马赫-曾德干涉仪的研究[J]. 光谱学与光谱分析, 2016, 36(5): 1560-1564.

    Sun M M, Wang J F, Jin Y X, et al. All-fiber Mach-Zehnder interferometer based on lateral-offset and peanut shape structure[J]. Spectroscopy and Spectral Analysis, 2016, 36(5): 1560-1564.

[24] Zhang C, Zhao J F, Miao C Y, et al. High-sensitivity all single-mode fiber curvature sensor based on bulge-taper structures modal interferometer[J]. Optics Communications, 2015, 336: 197-201.

[25] 陈大凤, 鲁平, 刘德明. 基于保偏光子晶体光纤的高灵敏度曲率传感器[J]. 激光技术, 2015, 39(4): 450-452.

    Chen D F, Lu P, Liu D M. Highly sensitive curvature sensors based on polarization-maintaining photonic crystal fibers[J]. Laser Technology, 2015, 39(4): 450-452.

[26] Wang Y P, Richardson D, Brambilla G, et al. Intensity measurement bend sensors based on periodically tapered soft glass fibers[J]. Optics Letters, 2011, 36(4): 558-560.

[27] Gander M J. MacPherson W N, McBride R, et al. Bend measurement using Bragg gratings in multicore fibre[J]. Electronics Letters, 2000, 36(2): 120-121.

[28] Ding J F, Zhang A P, Shao L Y, et al. Fiber-taper seeded long-period grating pair as a highly sensitive refractive-index sensor[J]. IEEE Photonics Technology Letters, 2005, 17(6): 1247-1249.

[29] Gong H P, Yang X, Ni K, et al. An optical fiber curvature sensor based on two peanut-shape structures modal interferometer[J]. IEEE Photonics Technology Letters, 2014, 26(1): 22-24.