[1] Oshida Y 2013 Surface modifications Bioscience and Bioengineering of Titanium Materials 2nd edn (Amsterdam: Elsevier) pp 341–456

[2] Kumar D, Mittal K, Kataria S, Kadiyan S and Sharma S 2013 Experimental investigation on surface modification of Wc-Co by electric discharge coating process using SiC/Cu green compact tool-electrode Int. J. Res. Mech. Eng. Technol. 3 274–8

[3] Prakash C and Uddin M S 2017 Surface modification of β- phase Ti implant by hydroaxyapatite mixed electric discharge machining to enhance the corrosion resistance and in-vitro bioactivity Surf. Coat. Technol. 326 134–45

[4] Das A and Misra J P 2016 Modelling and parametric optimisation of deposited layer thickness in electric discharge coating process Int. J. Surf. Sci. Eng. 10 253–71

[5] Bai C-Y and Koo C-H 2006 Effects of kerosene or distilled water as dielectric on electrical discharge alloying of superalloy Haynes 230 with Al–Mo composite electrode Surf. Coat. Technol. 200 4127–35

[6] Gupta B, Saxena S, Grover N and Ray A R 2010 Plasmatreated yarns for biomedical applications Technical Textile Yarns (Cambridge: Woodhead Publishing) pp 452–94

[7] Martin P M 2010 Surface preparation for film and coating deposition processes Handbook of Deposition Technologies for Films and Coatings (Amsterdam: Elsevier) pp 93–134

[8] Ratner B D 1989 Biomedical applications of synthetic polymers Comprehensive Polymer Science and Supplements (Amsterdam: Elsevier) pp 201–47

[9] Kalpakjian S and Schmid S 2014 Manufacturing Engineering and Technology (Singapore: Pearson)

[10] Priadi D, Pawiro T, Siradj E S and Winarto 2013 Surface modification of SKD 61 by electrical discharge coating (EDM/EDC) with multilayer cylindrical electrode and jatropha curcas as dielectric fluid Appl. Mech. Mater. 319 96–101

[11] Makhlouf A S H 2011 Current and advanced coating technologies for industrial applications Nanocoatings and Ultra-Thin Films (Amsterdam: Elsevier) pp 3–23

[12] Carlsson J-O and Martin P M 2010 Chemical vapor deposition Handbook of Deposition Technologies for Films and Coatings 3rd edn (Amsterdam: Elsevier) pp 314–63

[13] Mohanty R M and Roy M 2012 Thermal sprayed WC-Co coatings for tribological application Materials and Surface Engineering (Cambridge: Woodhead Publishing) pp 121–62

[14] Jalal Uddin A 2010 Coatings for technical textile yarns Technical Textile Yarns (Cambridge: Woodhead Publishing) pp 140–84

[15] Kumar S, Singh R, Singh T P P and Sethi B L L 2009 Surface modification by electrical discharge machining: a review J. Mater. Process. Technol. 209 3675–87

[16] Li R, Zhang C and Huang Z 2020 Quenching and rewetting of rock in liquid nitrogen: characterizing heat transfer and surface effects Int. J. Therm. Sci. 148 106161

[17] Maawad E, Brokmeier H G and Wagner L 2010 Texture gradients in shot peened Ti-2.5Cu Solid State Phenom. 160 141–6

[18] Ding L and Poursaee A 2017 The impact of sandblasting as a surface modification method on the corrosion behavior of steels in simulated concrete pore solution Constr. Build. Mater. 157 591–9

[19] Mussada E K and Patowari P K 2015 Characterisation of layer deposited by electric discharge coating process Surf. Eng. 31 796–802

[20] Chakraborty S, Kar S, Dey V and Ghosh S K 2017 The phenomenon of surface modification by electro-discharge coating process: a review Surf. Rev. Lett. 25 1830003

[21] Das A and Misra J P 2012 Experimental investigation on surface modification of aluminum by electric discharge coating process using TiC/Cu green compact tool-electrode Mach. Sci. Technol. 16 601–23

[22] Algodi S J, Murray J W, Fay M W, Clare A T and Brown P D 2016 Electrical discharge coating of nanostructured TiC-Fe cermets on 304 stainless steel Surf. Coat. Technol. 307 639–49

[23] Zeng Z, Xiao H, Jie X and Zhang Y 2015 Friction and wear behaviors of TiCN coating based on electrical discharge coating Trans. Nonferrous Met. Soc. China 25 3716–22

[24] Ahmed A 2016 Deposition and analysis of composite coating on aluminum using Ti–B4C powder metallurgy tools in EDM Mater. Manuf. Process. 31 467–74

[25] Madhaw S 2013 Surface modification by electro-discharge coating with WC–Cu P/M electrode tool Bachelor Thesis National Institute of Technology, Rourkela

[26] Sahu A K, Mahapatra S S and Chatterjee S 2017 Optimization of electrical discharge coating process using MOORA based firefly algorithm ASME 2017 Gas Turbine India Conf. American Society of Mechanical Engineers Digital Collection (https://doi.org/10.1115/GTINDIA2017-4636)

[27] Tijo D 2014 Electrical discharge coating of ceramicmetal composite on metal substrate using powder compact electrodes Masters Thesis National Institute of Technology, Rourkela

[28] Ho K H and Newman S T 2003 State of the art electrical discharge machining (EDM) Int. J. Mach. Tools Manuf. 43 1287–300

[29] Chen H-J and Wu K-L 2014 Electrical discharge coating process with sintered TiN electrodes Int. Conf. Machining, Materials and Mechanical Technologies (Taipei, September) pp 1–16

[30] Prakash C, Kansal H K, Pabla B S and Puri S 2015 Potential of powder mixed electric discharge machining to enhance the wear and tribological performance of β-Ti implant for orthopedic applications J. Nanoeng. Nanomanufact. 5 261–9

[31] Yu Z Y, Masuzawa T and Fujino M 1998 Micro-EDM for three-dimensional cavities—development of uniform wear method CIRP Ann. 47 169–72

[32] Mohri N, Fukuzawa Y, Tani T, Saito N and Furutani K 1996 Assisting electrode method for machining insulating ceramics CIRP Ann.—Manuf. Technol. 45 201–4

[33] Liew P J, Yan J and Kuriyagawa T 2013 Carbon nanofiber assisted micro electro discharge machining of reactionbonded silicon carbide J. Mater. Process. Technol. 213 1076–87

[34] Valaki J B and Rathod P P 2016 Assessment of operational feasibility of waste vegetable oil based bio-dielectric fluid for sustainable electric discharge machining (EDM) Int. J. Adv. Manuf. Technol. 87 1509–18

[35] Wang Y H, Liao C C, Chen Y C, Ou S F and Chiu C Y 2020 The feasibility of eco-friendly electrical discharge machining for surface modification of Ti: a comparison study in surface properties, bioactivity, and cytocompatibility Mater. Sci. Eng. C 108 110192

[36] Schumacher B M, Krampitz R and Kruth J-P 2013 Historical phases of EDM development driven by the dual influence of ‘market pull’ and ‘science push’ Proc. CIRP 6 5–12

[37] Crookall J R and Khor B C 1975 Electro-discharge machined surfaces Proc. 15th Int. Machine Tool Design and Research Conf. (London: Macmillan) pp 373–84

[38] Jeswani M L 1981 Effect of the addition of graphite powder to kerosene used as the dielectric fluid in electrical discharge machining Wear 70 133–9

[39] Gangadhar A, Shunmugam M S and Philip P K 1991 Surface modification in electrodischarge processing with a powder compact tool electrode Wear 143 45–55

[40] Furutania K, Saneto A, Takezawa H, Mohri N and Miyake H 1999 Surface modification by electrical discharge machining with titanium powder suspended Proc. 14th Annual Meeting of American Society for Precision Engineering (Monterey, California) pp 159–62

[41] Marashi H, Jafarlou D M, Sarhan A A D and Hamdi M 2016 State of the art in powder mixed dielectric for EDM applications Precis. Eng. 46 11–33

[42] Sim?o J, Aspinwall D, El-Menshawy F and Meadows K 2002 Surface alloying using PM composite electrode materials when electrical discharge texturing hardened AISI D2 J. Mater. Process. Technol. 127 211–6

[43] Hwang Y-L, Kuo C-L and Hwang S-F 2010 The coating of TiC layer on the surface of nickel by electric discharge coating (EDC) with a multi-layer electrode J. Mater. Process. Technol. 210 642–52

[44] Abdulkareem S, Ali Khan A and Konneh M 2010 Cooling effect on electrode and process parameters in EDM Mater. Manuf. Process. 25 462–6

[45] Janmanee P and Muttamara A 2012 Surface modification of tungsten carbide by electrical discharge coating (EDC) using a titanium powder suspension Appl. Surf. Sci. 258 7255–65

[46] Sidhu S S, Batish A and Kumar S 2014 Study of surface properties in particulate-reinforced metal matrix composites (MMCs) using powder-mixed electrical discharge machining (EDM) Mater. Manuf. Process. 29 46–52

[47] Ho S K, Aspinwall D K and Voice W 2007 Use of powder metallurgy (PM) compacted electrodes for electrical discharge surface alloying/modification of Ti–6Al–4V alloy J. Mater. Process. Technol. 191 123–6

[48] Chaudhury P and Samantaray S 2017 Role of carbon nano tubes in surface modification on electrical discharge machining—a review Mater. Today Proc. 4 4079–88

[49] Simao J, Lee H G, Aspinwall D K, Dewes R C and Aspinwall E M 2003 Workpiece surface modification using electrical discharge machining Int. J. Mach. Tools Manuf. 43 121–8

[50] Bhattacharya A, Batish A and Kumar N 2013 Surface characterization and material migration during surface modification of die steels with silicon, graphite and tungsten powder in EDM process J. Mech. Sci. Technol. 27 133–40

[51] Abulais S 2014 Current research trends in electric discharge machining (EDM): review Int. J. Sci. Eng. Res. 5 100–18

[52] Mishra D N, Bhatia A and Rana V 2014 Study on electro discharge machining (EDM) Int. J. Eng. Sci. 3 24–35

[53] Xiao H, Jie X, Zeng Z and Li G 2014 Titanium carbonitride coating by pulsed electrical discharge in an aqueous solution of ethanolamine Surf. Coat. Technol. 258 1006–10

[54] Elaiyarasan U, Satheeshkumar V and Senthilkumar C 2018 Experimental analysis of electrical discharge coating characteristics of magnesium alloy using response surface methodology Mater. Res. Express 5 086501

[55] Totten G E and MacKenzie D S 2004 Hanbook of Aluminum Volume 2 Alloy Production and Material Manufacturing (New York: Dekker)

[56] Murray J W, Cook R B, Senin N, Algodi S J and Clare A T 2018 Defect-free TiC/Si multi-layer electrical discharge coatings Mater. Des. 155 352–65

[57] Gill A S and Kumar S 2015 Surface alloying by powder metallurgy tool electrode using EDM process Mater. Today Proc. 2 1723–30

[58] Moro T, Mohri N, Otsubo H, Goto A and Saito N 2004 Study on the surface modification system with electrical discharge machine in the practical usage J. Mater. Process. Technol. 149 65–70

[59] Amorim F L, Dalcin V A, Soares P and Mendes L A 2017 Surface modification of tool steel by electrical discharge machining with molybdenum powder mixed in dielectric fluid Int. J. Adv. Manuf. Technol. 91 341–50

[60] Singh G, Singh G, Singh K and Singla A 2017 Experimental studies on material removal rate, tool wear rate and surface properties of machined surface by powder mixed electric discharge machining Mater. Today Proc. 4 1065–73

[61] Liew P J, Yap C Y, Nurlishafiqa Z, Othman I S, Chang S Y, Toibah A R and Wang J 2018 Material deposition on aluminium by electrical discharge coating (EDC) with a tungsten powder suspension J. Adv. Manuf. Technol. 12 133–46

[62] Chaudhury P, Samantaray S and Sahu S 2017 Multi response optimization of powder additive mixed electrical discharge machining by taguchi analysis Mater. Today Proc. 4 2231–41

[63] Kumari S 2015 Study of TiC coating on different type steel by electro discharge coating Masters Thesis National Institute of Technology, Rourkela

[64] Wang J H 2012 Surface preparation techniques for biomedical applications Coatings for Biomedical Applications (Cambridge: Woodhead Publishing) pp 143–75

[65] Algodi S J, Murray J W, Clare A T and Brown P D 2015 Characterisation of TiC layers deposited using an electrical discharge coating process J. Phys.: Conf. Ser. 644 012008

[66] Singh A K, Kumar S and Singh V P 2015 Effect of the addition of conductive powder in dielectric on the surface properties of superalloy super Co 605 by EDM process Int. J. Adv. Manuf. Technol. 77 99–106

[67] Murray J W W, Algodi S J J, Fay M W W, Brown P D D and Clare A T T 2017 Formation mechanism of electrical discharge TiC-Fe composite coatings J. Mater. Process. Technol. 243 143–51

[68] Vijayakumar S, Mohan N, Dineshbabu C and Karthikeyan G 2016 Reduce the mass losses for coated Al 7075 by using powder mixed electric discharge coating Int. J. Mod. Trends Eng. Sci. 3 184–6

[69] Beri N, Pungotra H and Kumar A 2012 To study the effect of polarity and current during electric discharge machining of inconel 718 with CuW powder metallurgy electrode Proc. National Conf. on Trends and Advances in Mechanical Engineering (Faridabad, October) pp 476–81

[70] Dhakar K and Dvivedi A 2017 Dry and near-dry electric discharge machining processes Advanced Manufacturing Technologies: Materials Forming, Machining and Tribology ed K Gupta (Cham: Springer) pp 249–66

[71] Tijo D and Masanta M 2017 Mechanical performance of insitu TiC–TiB2 composite coating deposited on Ti–6Al–4V alloy by powder suspension electro-discharge coating process Surf. Coat. Technol. 328 192–203

[72] DiBitonto D D, Eubank P T, Patel M R and Barrufet M A 1989 Theoretical models of the electrical discharge machining process: I. A simple cathode erosion model J. Appl. Phys. 66 4095–103

[73] Yeo S H, Kurnia W and Tan P C 2008 Critical assessment and numerical comparison of electro-thermal models in EDM J. Mater. Process. Technol. 203 241–51

[74] Algodi S J, Murray J W, Clare A T and Brown P D 2018 Modelling and characterisation of electrical discharge TiC– Fe cermet coatings Proc. CIRP 68 28–33

[75] Algodi S J, Clare A T and Brown P D 2018 Modelling of single spark interactions during electrical discharge coating J. Mater. Process. Technol. 252 760–72

[76] Murray J W, Fay M W, Kunieda M and Clare A T 2013 TEM study on the electrical discharge machined surface of singlecrystal silicon J. Mater. Process. Technol. 213 801–9

[77] Lockman Z 2018 1-Dimensional Metal Oxide Nanostructures: Growth, Properties, and Devices (Boca Raton, FL: CRC Press)

[78] Batish A, Bhattacharya A, Singla V K and Singh G 2012 Study of material transfer mechanism in die steels using powder mixed electric discharge machining Mater. Manuf. Process. 27 449–56

[79] Tijo D, Kumari S and Masanta M 2017 Hard and wear resistance TiC-composite coating on AISI 1020 steel using powder metallurgy tool by electro-discharge coating process J. Braz. Soc. Mech. Sci. Eng. 39 4719–34

[80] Gonzalez R, Ashrafizadeh H, Lopera A, Mertiny P and McDonald A 2016 A review of thermal spray metallization of polymer-based structures J. Therm. Spray Technol. 25 897–919

[81] Xie L, Abliz D and Li D 2014 Thin film coating for polymeric micro parts Comprehensive Materials Processing (Amsterdam: Elsevier) pp 157–70

[82] Doc Brown 2000 Electrolysis of copper sulfate solution and the applications of electroplating http://docbrown.info/ page01/ExIndChem/electrochemistry04.htm (Accessed: 11 October 2019)

[83] Talib R J, Saad S, Toff M R M and Hashim H 2003 Thermal spray coating technology—a review Solid State Sci. Technol. 11 109–17

[84] Faraji G, Kim H S and Kashi H T 2018 Introduction Severe Plastic Deformation (Amsterdam: Elsevier) pp 1–17

[85] Wang Z L, Fang Y, Wu P N, Zhao W S and Cheng K 2002 Surface modification process by electrical discharge machining with a Ti powder green compact electrode J. Mater. Process. Technol. 129 139–42

[86] Cheng H E and Wen Y W 2004 Correlation between process parameters, microstructure and hardness of titanium nitride films by chemical vapor deposition Surf. Coat. Technol. 179 103–9

[87] Roy A K and Goedel W A 2011 Control of thickness and morphology of thin alumina films deposited via pulsed chemical vapor deposition (pulsed CVD) through variation of purge times Surf. Coat. Technol. 205 4177–82

[88] Garg R, Rajagopalan N, Pyeon M, G?nüllü Y, Fischer T, Khanna A S and Mathur S 2018 Plasma CVD grown Al2O3 and MgAl2O4 coatings for corrosion protection applications Surf. Coat. Technol. 356 49–55

[89] Zeng Z, Wang L, Chen L and Zhang J 2006 The correlation between the hardness and tribological behaviour of electroplated chromium coatings sliding against ceramic and steel counterparts Surf. Coat. Technol. 201 2282–8

[90] Huang C A, Lin C K and Chen C Y 2009 Hardness variation and corrosion behavior of as-plated and annealed Cr–Ni alloy deposits electroplated in a trivalent chromium-based bath Surf. Coat. Technol. 203 3686–91

[91] Badisch E, Mitterer C, Mayrhofer P H, Mori G, Bakker R J, Brenner J and St?ri H 2004 Characterization of tribo-layers on self-lubricating PACVD TiN coatings Thin Solid Films 460 125–32

[92] Sahraoui T, Guessasma S, Fenineche N E, Montavon G and Coddet C 2004 Friction and wear behaviour prediction of HVOF coatings and electroplated hard chromium using neural computation Mater. Lett. 58 654–60

[93] Baik K H, Kim J H and Seong B G 2007 Improvements in hardness and wear resistance of thermally sprayed WC-Co nanocomposite coatings Mater. Sci. Eng. A 449–451 846–9

[94] Altun H and Sen S 2007 The effect of PVD coatings on the wear behaviour of magnesium alloys Mater. Charact. 58 917–21

[95] Bayón R, Igartua A, Fernández X, Martínez R, Rodríguez R J, García J A, de Frutos A, Arenas M A and de Damborenea J 2009 Corrosion-wear behaviour of PVD Cr/CrN multilayer coatings for gear applications Tribol. Int. 42 591–9

[96] Jalali Azizpour M and Tolouei-Rad M 2019 The effect of spraying temperature on the corrosion and wear behavior of HVOF thermal sprayed WC-Co coatings Ceram. Int. 45 13934–41

[97] Zhou D, Peng H, Zhu L, Guo H and Gong S 2014 Microstructure, hardness and corrosion behaviour of Ti/TiN multilayer coatings produced by plasma activated EB-PVD Surf. Coat. Technol. 258 102–7

[98] Chakraborty S, Kar S, Dey V and Ghosh S K 2017 Optimization and surface modification of Al-6351 alloy using SiC–Cu green compact electrode by electro discharge coating process Surf. Rev. Lett. 24 1750007

[99] Toshimitsu R, Okada A, Kitada R and Okamoto Y 2016 Improvement in surface characteristics by EDM with chromium powder mixed fluid Proc. CIRP 42 231–5

[100] Chen H, Wu K and Yan B-H 2014 Characteristics of Al alloy surface after EDC with sintered Ti electrode and TiN powder additive Int. J. Adv. Manuf. Technol. 72 319–32

[101] Murray J W and Clare A T 2016 Morphology and wear behaviour of single and multi-layer electrical discharge coatings Proc. CIRP 42 236–9

[102] Chicot D, Ageorges H, Voda M, Louis G, Ben Dhia M A, Palacio C C and Kossman S 2015 Hardness of thermal sprayed coatings: relevance of the scale of measurement Surf. Coat. Technol. 268 173–9

[103] Pougoum F, Qian J, Martinu L, Klemberg-Sapieha J, Zhou Z, Li K Y, Savoie S, Lacasse R, Potvin E and Schulz R 2019 Study of corrosion and tribocorrosion of Fe3Al-based duplex PVD/HVOF coatings against alumina in NaCl solution Surf. Coat. Technol. 357 774–83

[104] Daure J L, Carrington M J, Shipway P H, McCartney D G and Stewart D A 2018 A comparison of the galling wear behaviour of PVD Cr and electroplated hard Cr thin films Surf. Coat. Technol. 350 40–7

[105] Mohri N, Saito N, Tsunekawa Y and Kinoshita N 1993 Metal surface modification by electrical discharge machining with composite electrode CIRP Ann. 42 219–22

[106] Tijo D and Masanta M 2014 Surface modification of aluminum by electrical discharge coating with tungsten and copper mixed powder green compact electrodes 5th Int. & 26th All India Manufacturing Technology, Design and Research Conf. (Guwahati, December) ed S N Joshi and U Dixit p 190

[107] Singh P, Kumar A, Beri N and Kumar V 2010 Some experimental investigation on aluminum powder mixed EDM on machining performance of hastelloy steel Int. J. Adv. Eng. Technol. 1 28–45

[108] Gill A S and Kumar S 2016 Surface roughness and microhardness evaluation for EDM with Cu–Mn powder metallurgy tool Mater. Manuf. Process. 31 514–21

[109] Tsunekawa Y, Okumiya M, Mohri N and Takahashi I 1994 Surface modification of aluminum by electrical discharge alloying Mater. Sci. Eng. A 174 193–8

[110] Ranjan R 2014 Surface modification by electro-discharge coating (EDC) with TiC–Cu P/M electrode tool Bachelor Thesis National Institute of Technology, Rourkela

[111] Tyagi R, Das A K and Mandal A 2018 Electrical discharge coating using WS2 and Cu powder mixture for solid lubrication and enhanced tribological performance Tribol. Int. 120 80–92

[112] Chakraborty S, Kar S, Ghosh S K and Dey V 2017 Parametric optimization of electric discharge coating on aluminium- 6351 alloy with green compact silicon carbide and copper tool: a taguchi coupled utility concept approach Surf. Interfaces 7 47–57

[113] Mussada E K and Patowari P K 2015 Investigation of EDC parameters using W and Cu powder metallurgical compact electrodes Int. J. Mach. Mach. Mater. 17 65

[114] Mussada E K and Patowari P K 2017 Post processing of the layer deposited by electric discharge coating Mater. Manuf. Process. 32 442–9

[115] Rahang M and Patowari P K 2016 Parametric optimization for selective surface modification in EDM using taguchi analysis Mater. Manuf. Process. 31 422–31

[116] Kansal H K, Singh S and Kumar P 2007 Technology and research developments in powder mixed electric discharge machining (PMEDM) J. Mater. Process. Technol. 184 32–41

[117] Arun I, Duraiselvam M, Senthilkumar V, Narayanasamy R and Anandakrishnan V 2014 Synthesis of electric discharge alloyed nickel–tungsten coating on tool steel and its tribological studies Mater. Des. 63 257–62

[118] Ou S-F and Wang C-Y 2017 Effects of bioceramic particles in dielectric of powder-mixed electrical discharge machining on machining and surface characteristics of titanium alloys J. Mater. Process. Technol. 245 70–9

[119] Pe?as P and Henriques E 2008 Effect of the powder concentration and dielectric flow in the surface morphology in electrical discharge machining with powder-mixed dielectric (PMD-EDM) Int. J. Adv. Manuf. Technol. 37 1120–32

[120] Aliyu A A, Abdul-Rani A M, Ginta T L, Prakash C, Axinte E, Razak M A and Ali S 2017 A review of additive mixedelectric discharge machining: current status and future perspectives for surface modification of biomedical implants Adv. Mater. Sci. Eng. 2017 1–23

[121] Razak M R A, Liew P J, Hussein N I S, Ahsan Q and Yan J 2017 Effect of surfactants and additives on electrical discharge machining of reaction bonded silicon carbide ARPN J. Eng. Appl. Sci. 12 4334–9

[122] Kolli M and Kumar A 2015 Effect of dielectric fluid with surfactant and graphite powder on electrical discharge machining of titanium alloy using Taguchi method Eng. Sci. Technol. Int J 18 524–35

[123] Bajaj R, Tiwari A K and Dixit A R 2015 Current trends in electric discharge machining using micro and nano powder materials—a review Mater. Today Proc. 2 3302–7

[124] Prihandana G S, Mahardika M, Hamdi M, Wong Y S and Mitsui K 2011 Accuracy improvement in nanographite powdersuspended dielectric fluid for micro-electrical discharge machining processes Int. J. Adv. Manuf. Technol. 56 143–9

[125] Chen S L, Lin M H, Huang G X and Wang C C 2014 Research of the recast layer on implant surface modified by micro-current electrical discharge machining using deionized water mixed with titanium powder as dielectric solvent Appl. Surf. Sci. 311 47–53

[126] Ekmekci B, Ulus?z F, Ekmekci N and Ya?ar H 2015 Suspended SiC particle deposition on plastic mold steel surfaces in powder-mixed electrical discharge machining Proc. Inst. Mech. Eng. B 229 475–86

[127] Molinetti A, Amorim F L, Soares P C and Czelusniak T 2016 Surface modification of AISI H13 tool steel with silicon or manganese powders mixed to the dielectric in electrical discharge machining process Int. J. Adv. Manuf. Technol. 83 1057–68

[128] Prakash C, Kansal H K, Pabla B S and Puri S 2015 Processing and characterization of novel biomimetic nanoporous bioceramic surface on β-Ti implant by powder mixed electric discharge machining J. Mater. Eng. Perform. 24 3622–33

[129] Abdul-Rani A M M, Nanimina A M M, Ginta T L L and Razak M A A 2017 Machined surface quality in nano aluminum mixed electrical discharge machining Proc. Manuf. 7 510–7

[130] Kumar H 2014 Development of mirror like surface characteristics using nano powder mixed electric discharge machining (NPMEDM) Int. J. Adv. Manuf. Technol. 76 105–13

[131] Furutania K, Saneto A, Takezawa H, Mohri N and Miyake H 2001 Accretion of titanium carbide by electrical discharge machining with powder suspended in working fluid Precis. Eng. 25 138–44

[132] Jatti V S and Bagane S 2018 Thermo-electric modelling, simulation and experimental validation of powder mixed electric discharge machining (PMEDM) of BeCu alloys Alexandria Eng. J. 57 643–53

[133] Chen H-J, Wu K-L and Yan B-H 2013 Dry electrical discharge coating process on aluminum by using titanium powder compact electrode Mater. Manuf. Process. 28 1286–93

[134] Huang T-S, Hsieh S-F, Chen S-L, Lin M-H, Ou S-F and Chang W-T 2015 Surface modification of TiNi-based shape memory alloys by dry electrical discharge machining J. Mater. Process. Technol. 221 279–84

[135] Jameson E C 1983 Electrical Discharge Machining (Southfield, MI: Society of Manufacturing Engineers)

[136] Br?cking R, Meghwal A, Melzer S, Verdier S, Evans G, Lowbridge T, Vanhumbeeck J-F, Debrabandere D and Crahay J 2015 Development of electrical discharge coating (EDC) as chrome-free alternative for increasing campaign length of temper mill work rolls Iron Steel Technol. 12 68–76

[137] Tyagi R, Mahto N K, Das A K and Mandal A 2020 Preparation of MoS2?+?Cu coating through the EDC process and its analysis Surf. Eng. 36 86–93

[138] Das A and Jain N K 2013 Investigations on tool wear and material deposition aspects of TiC coating on aluminium by electro discharge coating process Int. J. Manuf. Technol. Manage. 27 251

[139] Gill A S and Kumar S 2015 Surface alloying of H11 die steel by tungsten using EDM process Int. J. Adv. Manuf. Technol. 78 1585–93

[140] Prakash V, Shubham, Singh P K, Das A K, Chattopadhyaya S, Mandal A and Dixit A R 2017 Surface alloying of miniature components by micro-electrical discharge process Mater. Manuf. Process. 6914 1–11

[141] Liew P J, Yan J and Kuriyagawa T 2013 Experimental investigation on material migration phenomena in micro-EDM of reaction-bonded silicon carbide Appl. Surf. Sci. 276 731–43

[142] Prakash C, Kansal H K, Pabla B S and Puri S 2017 Experimental investigations in powder mixed electric discharge machining of Ti–35Nb–7Ta–5Zrβ-titanium alloy Mater. Manuf. Process. 32 274–85

[143] Zain Z M, Ndaliman M B, Khan A A and Ali M Y 2014 Improving micro-hardness of stainless steel through powdermixed electrical discharge machining Proc. Inst. Mech. Eng. C 228 3374–80

[144] Sharma D, Mohanty S and Das A K 2020 Surface modification of titanium alloy using hBN powder mixed dielectric through micro-electric discharge machining Surf. Coat. Technol. 381 125157

[145] Krishna M E and Patowari P K 2013 Parametric optimisation of electric discharge coating process with powder metallurgy tools using Taguchi analysis Surf. Eng. 29 703–11

[146] Singh A K, Mahajan R, Tiwari A, Kumar D and Ghadai R K 2018 Effect of dielectric on electrical discharge machining: a review IOP Conf. Ser.: Mater. Sci. Eng. 377 012184

[147] Ueno M, Fujita N, Kimura Y and Nakata N 2016 Evaluation of coating and wear characteristics of roll surface coated with TiC by electrical discharge coating J. Mater. Process. Technol. 236 9–15

[148] Syed K H and Palaniyandi K 2012 Performance of electrical discharge machining using aluminium powder suspended distilled water Turkish J. Eng. Environ. Sci. 36 195–207

[149] Yih-Fong T and Fu-Chen C 2005 Investigation into some surface characteristics of electrical discharge machined SKD-11 using powder-suspension dielectric oil J. Mater. Process. Technol. 170 385–91

[150] Xie Z J, Mai Y J, Lian W Q, He S L and Jie X H 2016 Titanium carbide coating with enhanced tribological properties obtained by EDC using partially sintered titanium electrodes and graphite powder mixed dielectric Surf. Coat. Technol. 300 50–7

[151] Hu F Q, Cao F Y, Song B Y, Hou P J, Zhang Y, Chen K and Wei J Q 2013 Surface properties of SiCp/Al composite by powder-mixed EDM Proc. CIRP 6 101–6

[152] Ou S-F and Wang C-Y 2016 Fabrication of a hydroxyapatitecontaining coating on Ti–Ta alloy by electrical discharge coating and hydrothermal treatment Surf. Coat. Technol. 302 238–43

[153] Li L, Zhao L, Li Z Y, Feng L and Bai X 2017 Surface characteristics of Ti–6Al–4V by SiC abrasive-mixed EDM with magnetic stirring Mater. Manuf. Process. 32 83–6

[154] Kolli M and Kumar A 2014 Effect of boron carbide powder mixed into dielectric fluid on electrical discharge machining of titanium alloy Proc. Mater. Sci. 5 1957–65

[155] Bagotsky V S 2005 Fundamentals of Electrochemistry (Hoboken, NJ: Wiley)

[156] SUMI N, Goto A, Teramoto H, Yasunaga Y and Nakano Y 2011 Study of Si-containing amorphous layer by electrical discharge coating Int. J. Electr. Mach. 16 27–32

[157] Algodi S J, Murray J W, Brown P D and Clare A T 2018 Wear performance of TiC/Fe cermet electrical discharge coatings Wear 402–403 109–23

[158] Aspinwall D K, Dewes R C, Lee H G, Simao J and McKeown P A 2003 Electrical discharge surface alloying of Ti and Fe workpiece materials using refractory powder compact electrodes and Cu wire CIRP Ann. 52 151–6

[159] Devarani N and Joshi S N 2018 Surface alloying of Ti–6Al– 4V on P20 mold steel using electric discharge processing (EDP) Mater. Today Proc. 5 8523–31

[160] Jhavar S, Paul C P and Jain N K 2013 Causes of failure and repairing options for dies and molds: a review Eng. Fail. Anal. 34 519–35

[161] Singh A, Kanth Grover N and Singh P 2014 Surface modification of EDM process using carbon nano tubes, a review Int. J. Eng. Res. Dev. 10 63–8

[162] Lee H, Simao J, Aspinwall D, Dewes R and Voice W 2004 Electrical discharge surface alloying J. Mater. Process. Technol. 149 334–40

[163] Peng P-W, Ou K-L, Lin H-C, Pan Y-N and Wang C-H 2010 Effect of electrical-discharging on formation of nanoporous biocompatible layer on titanium J. Alloys Compd. 492 625–30

[164] Sales W F, Oliveira A R F and Raslan A A 2016 Titanium perovskite (CaTiO3) formation in Ti6Al4V alloy using the electrical discharge machining process for biomedical applications Surf. Coat. Technol. 307 1011–5

[165] Yang T-S, Huang M-S, Wang M-S, Lin M-H, Tsai M-Y and Wang Wang P-Y 2013 Effect of electrical discharging on formation of nanoporous biocompatible layer on Ti–6Al–4V alloys Implant Dent. 22 374–9

[166] Liu X, Chu P K and Ding C 2004 Surface modification of titanium, titanium alloys, and related materials for biomedical applications Mater. Sci. Eng. R 47 49–121

[167] Walczak J, Shahgaldi F and Heatley F 1998 In vivo corrosion of 316L stainless-steel hip implants: morphology and elemental compositions of corrosion products Biomaterials 19 229–37