一种利用布里渊谱宽确定光纤SBS阈值的新方法
李永倩, 李晓娟, 安琪, 张立欣. 一种利用布里渊谱宽确定光纤SBS阈值的新方法[J]. 红外与激光工程, 2017, 46(2): 0222001.
Li Yongqian, Li Xiaojuan, An Qi, Zhang Lixin. New method for the determination of SBS threshold in an optical fiber by employing Brillouin spectrum width[J]. Infrared and Laser Engineering, 2017, 46(2): 0222001.
[1] Singh S P, Gangwar R, Singh N. Nonlinear scattering effects in optical fibers[J]. Progress in Electromagnetics Research, 2007, 74: 379-405.
[2] Aoki Y, Tajima K, Mito I. Input power limits of single-mode optical fibers due to stimulated Brillouin scattering in optical communication systems[J]. Journal of Lightwave Technology, 1988, 6(5): 710-719.
[3] 赵丽娟, 李永倩, 徐志钮. 多模光纤布里渊散射谱及阈值理论计算[J]. 红外与激光工程, 2015, 44(S): 93-98.
[4] Norcia S, Tonda-Goldstein S, Dolfi D, et al. Efficient single-mode Brillouin fiber laser for low-noise optical carrier reduction of microwave signals[J]. Optics Letters, 2003, 28(20): 1888-1890.
[5] Tanemura T, Takushima Y, Kikuchi K. Narrowband optical filter, with a variable transmission spectrum, using stimulated Brillouin scattering in optical fiber[J]. Optics Letters, 2002, 27(17): 1552-1554.
[6] 张毅, 柏连发, 陈钱, 等. 布里渊散射在水下激光成像探测中的应用[J]. 红外与激光工程, 2009, 38(4): 665-668.
Zhang Yi, Bai Lianfa, Chen Qian, et al. Application of Brillouin scattering on underwater laser imaging detection[J]. Infrared and Laser Engineering, 2009, 38(4): 665-668. (in Chinese)
[7] Shi J L, Tang Y J, Wei H J, et al. Temperature dependence of threshold and gain coefficient of stimulated Brillouin scattering in water[J]. Applied Physics B: Lasers and Optics, 2012, 108(4): 717-720.
[8] Parvizi R, Harun S W, Ali N M, et al. Investigation on threshold power of stimulated Brillouin scattering in photonic crystal fiber[J]. Optik, 2012, 123(13): 1149- 1152.
[9] Sanchez-Lara R, Alvarez-Chavez J A, Mendez-Martinez F, et al. Threshold and maximum power evolution of stimulated Brillouin scattering and Rayleigh backscattering in a single mode fiber segment[J]. Laser Physics, 2015, 25(3): 035103
[10] Hu J H, Xia L, Yang L, et al. Strain-induced vibration and temperature sensing BOTDA system combined frequency sweeping and slope-assisted techniques[J]. Optics Express, 2016, 24(12): 13610-13620.
[11] Smith R G. Optical power handling capacity of low loss optical fibers as determined by stimulated Raman and Brillouin scattering[J]. Applied Optics, 1972, 11(11): 2489-2494.
[12] Lee C C, Chi S. Measurement of stimulated-Brillouin- scattering threshold for various types of fibers using Brillouin optical-time-domain reflectometer[J]. IEEE Photonics Technology Letters, 2000, 12(6): 672-674.
[13] Shimizu T, Nakajima K, Shiraki K, et al. Evaluation methods and requirements for the stimulated Brillouin scattering threshold in a single-mode fiber[J]. Optical Fiber Technology, 2008, 14(1): 10-15.
[14] Li C L, Lu Y G, Zhang X P. SNR enhancement in Brillouin optical time domain reflectometer using multi-wavelength coherent detection[J]. Electronics Letters, 2012, 48(18): 1139-1141.
[15] Bao X Y, Dhliwayo J, Heron N, et al. Experimental and theoretical studies on a distributed temperature sensor based on Brillouin scattering[J]. Journal of Lightwave Technology, 1995, 13(7): 1340-1348.
[16] Iida D, Ito F. Detection sensitivity of Brillouin scattering near Fresnel reflection in BOTDR measurement[J]. Journal of Lightwave Technology, 2008, 26(4): 417-424.
[17] Nguyen-Vo N-M, Pfeifer S J. A model of spontaneous Brillouin scattering as the noise source for stimulated scattering[J]. IEEE Journal of Quantum Electronics, 1993, 29(2): 508-514.
[18] Shimizu K, Horiguchi T, Koyamada Y, et al. Coherent self-heterodyne detection of spontaneously Brillouin-scattered light waves in a single-mode fiber[J]. Optics Letters, 1993, 18(3): 185-187.
[19] Boyd R W, Rzazewski K, Narum P. Noise initiation of stimulated Brillouin scattering[J]. Physical Review A, 1990, 42(9): 5514-5520.
李永倩, 李晓娟, 安琪, 张立欣. 一种利用布里渊谱宽确定光纤SBS阈值的新方法[J]. 红外与激光工程, 2017, 46(2): 0222001. Li Yongqian, Li Xiaojuan, An Qi, Zhang Lixin. New method for the determination of SBS threshold in an optical fiber by employing Brillouin spectrum width[J]. Infrared and Laser Engineering, 2017, 46(2): 0222001.