[1] 赵文杰, 王立平, 薛群基. 织构化提高表面摩擦学性能的研究进展[J]. 摩擦学学报, 2011, 31(6): 622-631.

    Zhao Wenjie, Wang Liping, Xue Qunji. Development and research progress of surface texturing on improving tribological performance of surface[J]. Tribology, 2011, 31(6): 622-631.

[2] Sung I H, Lee H S, Kim D E. Effect of surface to pography on the frictional behavior at the micro/nano-scale[J]. Wear, 2003, 254(10): 1019-1031.

[3] Wang X, Kato K. Improving the anti-seizure ability of SiC seal in water with RIE texturing[J]. Tribology Letters, 2003, 14(4): 275-280.

[4] Etsion I. State of the art in laser surface texturing[J]. J Tribol, 2005, 127(1): 248-253.

[5] Nacer T I, Michel F, Patrick M. Effect of textured area on the performances of a hydrodynamic journal bearing[J]. Tribology International, 2011, 44(3): 211-219.

[6] Grabon W, Koszela W, Pawlus P, et al.. Improving tribological behaviour of piston ring-cylinder liner frictional pair by liner surface texturing[J]. Tribology International, 2013, 61: 102-108.

[7] 张朋波, 秦颖, 赵纪军, 等. 纳秒激光烧蚀铝材料的二维数值模拟[J]. 物理学报, 2010, 59(10): 7120-7128.

    Zhang Pengbo, Qin Ying, Zhao Jijun, et al.. Two-dimensional numerical simulation of laser-ablation of aluminum material by nanosecond laser pulse[J]. Acta Physica Sinica, 2010, 59(10): 7120-7128.

[8] Marla D, Bhandarkar U V, Joshi S S. Modeling nanosecond pulsed laser ablation: A focus on temperature dependence of material properties [J]. Manufacturing Letters, 2014, 2(2): 13-16.

[9] Gilbert D, Stoesslein M, Axinte D, et al.. A time based method for predicting the workpiece surfacemicro-topography under pulsed laser ablation[J]. Journal of Materials Processing Technology, 2014, 214(12): 3077-3088.

[10] Kong M C, Miron C B, Axinte D A, et al.. On the relationship between the dynamics of the power density and workpiece surface texture in pulsed laser ablation[J]. CIRP Annals Manufacturing Technology, 2012, 61(1): 203-206.

[11] 彭国良, 杜太焦, 刘峰, 等. 激光烧蚀玻璃纤维/环氧树脂复合材料的能量耦合率模拟研究[J]. 中国激光, 2014, 41(2): 0203001.

    Peng Guoliang, Du Taijiao, Liu Feng, et al.. Simulation study of laser energy coupling coefficient in the process of ablating glass fiber/ epoxy composites[J]. Chinese J Lasers, 2014, 41(2): 0203001.

[12] Vilhena L M, Sedlac ek M, Podgornik B, et al.. Surface texturing by pulsed Nd∶YAG laser[J]. Tribology International, 2009, 42(10): 1496- 1504.

[13] 苏永生, 李亮, 何宁, 等. 激光加工硬质合金刀具表面微织构的试验研究[J]. 中国激光, 2014, 41(6): 0603002.

    Su Yongsheng, Li Liang, He Ning, et al.. Experimental research on laser machining of surface micro-textures of carbide cutting tool[J]. Chinese J Lasers, 2014, 41(6): 0603002.

[14] 苏永生, 李亮, 何宁, 等. 聚晶金刚石表面微结构的激光加工实验[J]. 中国激光, 2014, 41(8): 0803004.

    Su Yongsheng, Li Liang, He Ning, et al.. Experiment of laser machining of micro-textures on the surface of polycrystalline diamond[J]. Chinese J Lasers, 2014, 41(8): 0803004.

[15] Fu Y, Ji J, Bi Q. Hydrodynamic lubrication of conformal contacting surfaces with parabolic grooves[J]. J Tribol, 2012, 134(1): 011701.

[16] Ji J, Fu Y, Bi Q. The influence of partially textured slider with orientation ellipse dimples on the behavior of hydrodynamic lubrication [J]. Industrial Lubrication and Tribology, 2014, 66(2): 161-167.

[17] 华希俊, 符永宏, 袁润, 等. 激光表面微造型工艺试验与应用[J]. 农业机械学报, 2007, 38(12): 177-180.

    Hua Xijun, Fu Yonghong, Yuan Run, et al.. Experimental investigations on laser surface micro-texturing technology[J]. Transactions of the Chinese Society for Agricultural Machinery, 2007, 38(12): 177-180.

[18] 康正阳, 符永宏, 尹必峰, 等. 分区异化织构缸孔表面形貌表征[J]. 江苏大学学报: 自然科学版, 2015, 36(1): 93-98.

    Kang Zhengyang, Fu Yonghong, Yin Bifeng, et al.. Characterization of partitioned alienation surface texturing on cylinder bore[J]. Journal of Jiangsu University: Natural Science Edition, 2015, 36(1): 93-98.

[19] Liu J M. Simple technique for measurements of pulsed Gaussian-beam spot sizes[J]. Optics Letters, 1982, 7(5): 196-198.

[20] Vladoiu I, Stafe M, Negutu C, et al.. The dependence of the ablation rate of metals on nanosecond laser fluence and wavelength[J]. Journal of Optoelectronics and Advanced Materials, 2008, 10(12): 3177-3181.