[1] 段黎明，邱猛，吴朝明.面向逆向工程的工业CT图像预处理系统开发［J］.强激光与粒子束， 2008， 20(4):666-670.

    Duan Liming, Qiu Meng, Wu Zhaoming. Development of industrial CT image pre-processing system for reverse engineering. High Power Laser and Particle Beams, 2008, 20(4):666-670

[2] 段黎明，颜志明，陈中，等.工业CT切片序列任意方向剖面的绘制方法［J］.强激光与粒子束， 2013， 25(11):3040-3044.

    Duan Liming, Yan Zhiming, Chen Zhong, et al. Arbitrary planes rendering algorithm of industrial CT serial images. High Power Laser and Particle Beams, 2013, 25(11):3040-3044

[3] Turk G. Retiling polygonal surfaces［J］. Computer Graphics, 1992, 26(2):55-64.

[4] 段黎明，白洋，王武礼，等.基于工业CT图像重构的网格模型的保特征简化方法［J］.强激光与粒子束， 2014， 26：114004.

    Duan Liming, Bai Yang, Wang Wuli, et al. Simplification with feature preserving for mesh model reconstructed by industrial CT serial images. High Power Laser and Particle Beams, 2014, 26:114004

[5] 刘晓利，刘则毅，高鹏东，等.基于尖特征度的边折叠简化方法［J］.软件学报， 2005， 16(5):669-675.

    Liu Xiaoli, Liu Zeyi, Gao Pengdong, et al. Edge collapse simplification based on sharp degree. Journal of Software, 2005, 16(5):669-675

[6] Garland M, Heckbert P S. Surface simplification using quadric error metrics［C］//Proceedings of the 24th Annual Conference On Computer Graphics and Interactive Techniques. 1997:209-216.

[7] Hildebrandt K, Polthier K. Anisotropic filtering of non-linear surface features［J］.Computer Graphics Forum, 2004, 23(3):391-400.

[8] Fleishman S, Drori I, Cohen-Or D. Bilateral mesh denoising［J］. ACM Transactions on Graphics, 2003, 22(3):950-953.

[9] 李根，陈志杨，张三元，等.网格曲面中复杂孔洞的自动修补算法［J］.浙江大学学报:工学版， 2007， 41(3):407-411.

    Li Gen, Chen Zhiyang, Zhang Sanyuan, et al. Automatic repairing algorithm for complex holes of triangular mesh surfaces. Journal of Zhejiang University (Engineering Science), 2007, 41(3):407-411

[10] Masala G L, Golosio B, Oliva P. An improved marching cube algorithm for 3D data segmentation［J］. Computer Physics Communications, 2013, 184(3):777-782.

[11] Zagorchev L G, Goshtasby A A. A curvature-adaptive implicit surface reconstruction for irregularly spaced points［J］. IEEE Trans Vis Comput Graph, 2012, 18(9):1460-1473.

[12] 李庚银，宁宇.快速傅里叶变换的两种改进算法［J］.电力系统自动化， 1997， 21(12):37-40.

    Li Gengyin, Ning Yu. Two modified algorithms for fast Fourier transform. Automation of Electric Power Systems, 1997, 21(12):37-40

[13] 神会存，周来水.基于离散曲率计算的三角网格模型优化调整［J］.航空学报， 2006， 27(2):318-324.

    Shen Huicun, Zhou Laishui. Triangular mesh regularization based on discrete curvature estimation. Acta Aeronautica et Astronautica Sinica, 2006, 27(2):318-324

[14] Sun Qian, Zhang Long, He Ying. Splatting lines for 3D mesh illustration［C］//Proceedings of the ACM SIGGRAPH Symposium on Interactive 3D Graphics and Games ACM. 2013.

[15] 陈中，段黎明，刘璐.保特征的三角网格均匀化光顺算法［J］.计算机集成制造系统， 2013， 19(3):461-467.

    Chen Zhong, Duan Liming, Liu Lu. Feature-preserving uniform mesh smoothing algorithm. Computer Integrated Manufacturing Systems, 2013, 19(3):461-467